Renault

Name: Front Lower Wishbone BushProduct Notes: Weight: 1477Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: Weight: 1477Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: Weight: 528Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: 40mm diameter Fits Clio and 16V models. For Williams models use PFF60-301 or PFF60-301G. Weight: 763Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: 40mm diameter Fits Clio and 16V models. For Williams models use PFF60-301 or PFF60-301G. Weight: 763Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: Weight: 528Fitting Instructions

Name: Front Lower Wishbone Bush, Camber AdjustableProduct Notes: PFF60-301G front lower wishbone bush is on-car adjustable with the supplied C spanner. It has a range of +/- 0.75 degrees camber adjustment enabling the geometry to be fine-tuned, thus improving the handling. For a non-adjustable bush, please use PFF60-301. Weight: 1656Fitting Instructions

Name: Front Lower Wishbone Bush, Camber AdjustableProduct Notes: PFF60-301G front lower wishbone bush is on-car adjustable with the supplied C spanner. It has a range of +/- 0.75 degrees camber adjustment enabling the geometry to be fine-tuned, thus improving the handling. For a non-adjustable bush, please use PFF60-301. Weight: 1656Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: This bush is suitable for Road and Black Series applications and require the re-use of the original outer shells. Weight: 247Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: This bush is suitable for Road and Black Series applications and require the re-use of the original outer shells. Weight: 235Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: This bush is suitable for Road and Black Series applications and require the re-use of the original outer shells. Weight: 235Fitting Instructions

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Subframe Mounting BushProduct Notes: PFR60-406 bushes replace the original bushes in the front subframe, these are not available from Renault, the front sub frame would have to be bought and fitted. Powerflex bushes can be fitted with the subframe left in the car. Weight: 694Fitting Instructions

Name: Front Upper Arm Inner BushProduct Notes: Weight: 184Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: Front Wishbone BushProduct Notes: PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response. Weight: 1280Fitting Instructions

Name: Front Wishbone Bush AdjustableProduct Notes: PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications. Weight: 1540Fitting Instructions

Name: Front Wishbone Bush AdjustableProduct Notes: PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications. Weight: 1540Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response. Weight: 1280Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 122Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 122Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: PFF60-1421 Gearbox Mounting Bush Insert is a two-part kit that acts to stiffen the upper and lower voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF60-1420 Upper Engine Mount Insert and PFF60-1422 Lower Torque Mount Weight: 124Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: Made using our Black 95A durometer material, PFF60-1421BLK Gearbox Mounting Bush Insert is a two-part kit that acts to stiffen the upper and lower voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF60-1420BLK Upper Engine Mount Insert and PFF60-1422BLK Lower Torque Mount. Weight: 124Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: This is an insert that fits into and fills voids in the original rubber bush in lower engine mount. Fits Clio III ,Megane II, Kangoo II and Scenic II 1.5L Diesel models. Also fits 1.6L Petrol Clio III and Kangoo II. Weight: 156

Name: Lower Engine Mount InsertProduct Notes: This is an insert that fits into and fills voids in the original rubber bush in lower engine mount. Fits Clio III ,Megane II, Kangoo II and Scenic II 1.5L Diesel models. Also fits 1.6L Petrol Clio III and Kangoo II. Weight: 156

Name: Lower Engine Mount Insert Product Notes: PFF60-1020BLK Lower Engine Mount Insert is made using our Black Series 95A material for those who want no compromise, ultimate performance for the track or motorsport. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount. Weight: 43

Name: Lower Engine Mount InsertProduct Notes: Fits Clio III Sport & Megane II Sport models inc RS. - This is an insert that fits into and fills voids in the original rubber bush in lower engine mount OE part numbers: 8200042454. This mount is rubber coated. it has been superseded with an alloy extruded bracket part number 8200777542 the insert wont fit the later part. An insert PFF60-526 is available for this part Weight: 156

Name: Lower Engine Mount InsertProduct Notes: Fits Clio III Sport & Megane II Sport models inc RS. - This is an insert that fits into and fills voids in the original rubber bush in lower engine mount OE part numbers: 8200042454. This mount is rubber coated. it has been superseded with an alloy extruded bracket part number 8200777542 the insert wont fit the later part. An insert PFF60-526 is available for this part Weight: 156

Name: Lower Engine Mount InsertProduct Notes: PFF60-1020 Lower Engine Mount Insert is an affordable and easy to fit upgrade for the soft voided rubber mount, improving wheel hop, gear changes and throttle response. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount. Weight: 43

Name: Lower Engine Mount Large Bush Product Notes: Our polyurethane bushes are ideal replacements for worn or damaged parts. Engine mount bushes are particularly prone to cracking of the rubber because of a large amount of voiding in the material to allow for excessive movement. The hexagonal profile allows for controlled engine movement and limits contact for reduced vibration. Fits the later Phase II vehicle only. Weight: 435Fitting Instructions