Partner - Ranch Models

Name: Front Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 176Fitting Instructions

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Bush Size: 22mmWeight: 176Fitting Instructions

Name: Front Anti Roll Bar Bush 23mmProduct Notes: Measure bar diameter and select correct size for your car. Bush Size: 23mmWeight: 173

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Measure bar diameter and select correct size for your car. Bush Size: 24mmWeight: 173

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Measure bar diameter and select correct size for your car. Bush Size: 25mmWeight: 173

Name: Front Arm Front BushProduct Notes: Weight: 575Fitting Instructions

Name: Front Arm Rear BushProduct Notes: Weight: 515Fitting Instructions

Name: Front Arm Rear Bush Anti-Lift & Caster Offset Product Notes: Offers anti-dive and anti-lift characteristics and increases caster by 0.5 deg. It comes complete with the bush, alloy bracket, bolt and washers. Weight: 529Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Weight: 311

Name: Lower Rear Engine Mount Bush - Diesel EngineProduct Notes: Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308 GTi models. Please note these parts should be considered an upgrade and therefore some additional NVH transmission may be felt. For vehicles with a 65mm bush use PFF50-420R. Bush Size: 70mmWeight: 425Fitting Instructions

Name: Lower Rear Engine Mount Bush - Fast Road/TrackProduct Notes: Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308 GTi models. Please note these parts should be considered an upgrade and therefore some additional NVH transmission may be felt. For vehicles with a 65mm bush use PFF50-420P. Bush Size: 70mmWeight: 425Fitting Instructions

Name: Lower Rear Engine Mount Bush - Fast Road/TrackProduct Notes: Peugeot 206 PFF50-420 fits 1.1, 1.4 & 1.6 petrol engines (65mm). - Peugeot 307 PFF50-420 is used where the original bush diameter measures 65mm, for vehicles with a 70mm bush use PFF50-306. Bush Size: 65mmWeight: 288Fitting Instructions

Name: Lower Rear Engine Mount Bush - Road Product Notes: Peugeot 206 PFF50-420 fits 1.1, 1.4 & 1.6 petrol engines (65mm). - Peugeot 307 PFF50-420 is used where the original bush diameter measures 65mm, for vehicles with a 70mm bush use PFF50-306. Bush Size: 65mmWeight: 288Fitting Instructions

Name: Lower Rear Engine Mount Bush - Road Product Notes: Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308 GTi models. Please note these parts should be considered an upgrade and therefore some additional NVH transmission may be felt. For vehicles with a 65mm bush use PFF50-420. Bush Size: 70mm Weight: 425 Fitting Instructions

Name: Lower Rear Engine Mount Bush - Std DieselProduct Notes: PFF50-420R fits diesel engines with a 65mm original bush. For vehicles with a 70mm bush use part number PFF50-306R. Bush Size: 65mmWeight: 288Fitting Instructions

Name: Lower Rear Engine Mount Bush - Track/MSportProduct Notes: Peugeot 206 PFF50-420 fits 1.1, 1.4 & 1.6 petrol engines (65mm). - Peugeot 307 PFF50-420 is used where the original bush diameter measures 65mm, for vehicles with a 70mm bush use PFF50-306. Bush Size: 65mmWeight: 288Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam BushProduct Notes: Fits 1.6 petrol, 1.6 & 2.0 diesel models with a rear beam, not for multi link rear suspension models. Weight: 1050Fitting Instructions

Name: Universal Exhaust MountProduct Notes: Weight: 74Fitting Instructions