Cee'd-Procee'd JD (2012-2018)

Name: Front Anti Roll Bar Bush 20mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 148

Name: Front Anti Roll Bar Bush 20mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 148

Name: Front Anti Roll Bar Bush 22.5mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering. Bush Size: 22.5mmWeight: 148

Name: Front Anti Roll Bar Bush 22.5mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering. Bush Size: 22.5mmWeight: 148

Name: Front Anti Roll Bar Bush 23.2mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering. Bush Size: 23.2mmWeight: 148

Name: Front Anti Roll Bar Bush 23.2mm Product Notes: Please check anti roll bar diameter before ordering. Bush Size: 23.2mmWeight: 148

Name: Front Wishbone Front BushProduct Notes: Made from our Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering. Weight: 489Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Made from our Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering. Weight: 489Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: Made from our Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5 of Camber adjustment for dialling in your wheel geometry. Fitting this bush may result in a small amount of caster change, so fitting PFF26-102G Front Wishbone Rear Bush Caster Adjust is recommended to neutralise or improve any caster change. Weight: 523Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: Made from our Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5 of Camber adjustment for dialling in your wheel geometry. Fitting this bush may result in a small amount of caster change, so fitting PFF26-102G Front Wishbone Rear Bush Caster Adjust is recommended to neutralise or improve any caster change. Weight: 523Fitting Instructions

Name: Lower Torque Mount - Fast RoadProduct Notes: PFF26-122 Lower Torque Mount - Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability. To suit the variable requirements of the i30N driver, our new part is available in three different ratings of shore hardness to balance performance requirements.Yellow Shore A 70is an upgraded replacement for the original bush, recommended for fast road use.Purple Shore A 80is a stiffer material to suit higher powered cars that may be used on the track. Black Shore A 95is our Black Series part for extreme Track and Motorsport applications for ultimate engine stability.Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration may be felt.Graph showing Load vs Displacement of each of our materials compared with the original, rubber bush .CNC-machined brackets from billet 6082 Aluminium for strength and durability. Weight: 1965Fitting Instructions

Name: Lower Torque Mount - Fast Road/TrackProduct Notes: PFF26-122P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability. To suit the variable requirements of the i30N driver, our new part is available in three different ratings of shore hardness to balance performance requirements.Yellow Shore A 70is an upgraded replacement for the original bush, recommended for fast road use.Purple Shore A 80is a stiffer material to suit higher powered cars that may be used on the track.Black Shore A 95is our Black Series part for extreme Track and Motorsport applications for ultimate engine stability.Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration may be felt.Graph showing Load vs Displacement of each of our materials compared with the original, rubber bushCNC-machined brackets from billet 6082 Aluminium for strength and durability. Weight: 1965Fitting Instructions

Name: Lower Torque Mount - MotorsportProduct Notes: PFF26-122-12BLK Lower Torque Mount - Motorsport uses our Black 95A material for all bush components to maximise mount stiffness, resulting in a mega 1300% increase over the stock mount for uncompromising powertrain control for serious track and motorsports use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the N-ext level upgrade for those looking for ultimate engine stability. To suit the variable requirements of the i30N driver, our new part is available in three different ratings of shore hardness to balance performance requirements.Yellow Shore A 70is an upgraded replacement for the original bush, recommended for fast road use.Purple Shore A 80is a stiffer material to suit higher-powered cars that may be used on the track. Black Shore A 95is our Black Series part for extreme Track and Motorsport applications for ultimate engine stability.Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration may be felt.Graph showing Load vs Displacement of each of our materials compared with the original, rubber bush.CNC-machined brackets from billet 6082 Aluminium for strength and durability. Weight: 1965Fitting Instructions

Name: Lower Torque Mount Bush - Diesel Product Notes: PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned diesel vehicles. To suit the variable requirements of the i30N driver, our new part is available in three different ratings of shore hardness to balance performance requirements. Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration may be felt. Yellow Shore A 70is an upgraded replacement for the original bush, recommended for fast road usePurple Shore A 80is a stiffer material to suit higher powered cars that may be used on the track Black Shore A 95is our Black Series part for extreme Track and Motorsport applications for ultimate engine stabilityGraph showing Load vs Displacement of each of our materials compared with the original, rubber bush Weight: 205Fitting Instructions

Name: Lower Torque Mount Bush - Fast Road Product Notes: PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles. To suit the variable requirements of the i30N driver, our new part is available in three different ratings of shore hardness to balance performance requirements. Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration may be felt. Yellow Shore A 70is an upgraded replacement for the original bush, recommended for fast road usePurple Shore A 80is a stiffer material to suit higher powered cars that may be used on the track Black Shore A 95is our Black Series part for extreme Track and Motorsport applications for ultimate engine stabilityGraph showing Load vs Displacement of each of our materials compared with the original, rubber bush Weight: 205Fitting Instructions

Name: Lower Torque Mount Bush - Fast Road/TrackProduct Notes: PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved. To suit the variable requirements of the i30N driver, our new part is available in three different ratings of shore hardness to balance performance requirements. Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration maybe felt.Yellow Shore A 70is an upgraded replacement for the original bush, recommended for fast road usePurple Shore A 80is a stiffer material to suit higher powered cars that may be used on the trackBlack Shore A 95is our Black Series part for extreme Track and Motorsport applications for ultimate engine stabilityGraph showing Load vs Displacement of each of our materials compared with the original, rubber bush Weight: 205Fitting Instructions

Name: Lower Torque Mount Bush - MotorsportProduct Notes: PFF26-120BLK replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. It uses our Black 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs but an increase in NVH should be expected when fitting. To suit the variable requirements of the i30N driver, our new part is available in three different ratings of shore hardness to balance performance requirements. Whilst an increase in material stiffness will reduce engine movement, additional noise and vibration maybe felt.Yellow Shore A 70is an upgraded replacement for the original bush, recommended for fast road use Purple Shore A 80is a stiffer material to suit higher powered cars that may be used on the track Black Shore A 95is our Black Series part for extreme Track and Motorsport applications for ultimate engine stabilityGraph showing Load vs Displacement of each of our materials compared with the original, rubber bush Weight: 205Fitting Instructions

Name: Lower Torque Mount Small Bush 14mmProduct Notes: Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120. Bush Size: 14mmWeight: 236Fitting Instructions

Name: Lower Torque Mount Small Bush 14mmProduct Notes: Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120. Bush Size: 14mmWeight: 236Fitting Instructions

Name: Rear Anti Roll Bar Bush 15mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering. Bush Size: 15mmWeight: 126

Name: Rear Anti Roll Bar Bush 15mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering. Bush Size: 15mmWeight: 126

Name: Rear Anti Roll Bar Bush 19.3mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti-roll bar diameter before ordering. Bush Size: 19.3mmWeight: 126

Name: Rear Anti Roll Bar Bush 19.3mm Product Notes: Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti-roll bar diameters before ordering. Bush Size: 19.3mmWeight: 126