Twingo

Name: Dog Bone (Twisted) Engine Mount Bush KitProduct Notes: Fits Phase 2 172/182 Sport. Use PFF60-206K for Phase 1 172 Sport. Fits Twingo RS133 models from 02/11 only. Weight: 536Fitting Instructions

Name: Dog Bone (Twisted) Engine Mount Bush KitProduct Notes: Fits Phase 2 172/182 Sport. Use PFF60-206K for Phase 1 172 Sport. Fits Twingo RS133 models from 02/11 only. Weight: 536Fitting Instructions

Name: Front Anti Roll Bar Inner Bush 20mmProduct Notes: Fits Clio And 16V Models - Check anti roll bar diameter before ordering Bush Size: 20mmWeight: 128

Name: Front Anti Roll Bar Inner Bush 20mmProduct Notes: Fits Clio And 16V Models - Check anti roll bar diameter before ordering Bush Size: 20mmWeight: 128

Name: Front Anti Roll Bar Inner Bush 22mmProduct Notes: Check anti roll bar diameter before ordering. Bush Size: 22mmWeight: 124

Name: Front Anti Roll Bar Inner Bush 22mmProduct Notes: Check anti roll bar diameter before ordering. Bush Size: 22mmWeight: 124

Name: Front Anti Roll Bar Inner Bush 23mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 23mmWeight: 116

Name: Front Anti Roll Bar Inner Bush 23mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 23mmWeight: 116

Name: Front Anti Roll Bar Inner Bush 26mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 26mmWeight: 123

Name: Front Anti Roll Bar Inner Bush 26mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 26mmWeight: 123

Name: Front Anti Roll Bar Outer MountProduct Notes: Fits Clio & 16v Models Weight: 205

Name: Front Anti Roll Bar Outer MountProduct Notes: Fits Clio & 16v Models Weight: 205

Name: Front Lower Wishbone BushProduct Notes: Weight: 1477Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: Weight: 1477Fitting Instructions

Name: Front Lower Wishbone Bush, Camber AdjustableProduct Notes: PFF60-301G front lower wishbone bush is on-car adjustable with the supplied C spanner. It has a range of +/- 0.75 degrees camber adjustment enabling the geometry to be fine-tuned, thus improving the handling. For a non-adjustable bush, please use PFF60-301. Weight: 1656Fitting Instructions

Name: Front Lower Wishbone Bush, Camber AdjustableProduct Notes: PFF60-301G front lower wishbone bush is on-car adjustable with the supplied C spanner. It has a range of +/- 0.75 degrees camber adjustment enabling the geometry to be fine-tuned, thus improving the handling. For a non-adjustable bush, please use PFF60-301. Weight: 1656Fitting Instructions

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: Front Wishbone BushProduct Notes: PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response. Weight: 1280Fitting Instructions

Name: Front Wishbone Bush AdjustableProduct Notes: PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications. Weight: 1540Fitting Instructions

Name: Front Wishbone Bush AdjustableProduct Notes: PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications. Weight: 1540Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response. Weight: 1280Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: PFF60-1421 Gearbox Mounting Bush Insert is a two-part kit that acts to stiffen the upper and lower voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF60-1420 Upper Engine Mount Insert and PFF60-1422 Lower Torque Mount Weight: 124Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: Made using our Black 95A durometer material, PFF60-1421BLK Gearbox Mounting Bush Insert is a two-part kit that acts to stiffen the upper and lower voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF60-1420BLK Upper Engine Mount Insert and PFF60-1422BLK Lower Torque Mount. Weight: 124Fitting Instructions

Name: Lower Engine Mount Insert Product Notes: PFF60-1020BLK Lower Engine Mount Insert is made using our Black Series 95A material for those who want no compromise, ultimate performance for the track or motorsport. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount. Weight: 43

Name: Lower Engine Mount InsertProduct Notes: PFF60-1020 Lower Engine Mount Insert is an affordable and easy to fit upgrade for the soft voided rubber mount, improving wheel hop, gear changes and throttle response. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount. Weight: 43

Name: Lower Torque Mount, 3 CylinderProduct Notes: PFF60-1422R Lower Torque Mount has been designed to replace the extremely soft OEM rubber mount, combining a CNC machined aluminium bracket, with our Red 65A and Black 95A materials specifically designed to reduce engine/trans movement. The result is a sharpened throttle response during acceleration and gear changes and a more connected driving experience. It's also super easy to replace - just two bolts and it's out with the old, in with the new, and no pressing out of any rubber! Due to fitting to a 3cyl engine, an increase in NVH, usually at idle should be expected when stiffening the connecting mount between the engine/transmission and subframe. The harder the material used, the greater the NVH transmitted. Weight: 445Fitting Instructions

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Camber Bolt Kit (14mm) Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M14 x 70mm Weight: 261 Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97