Fiesta Mk6 inc ST (2002-2008)

Name: Exhaust MountProduct Notes: This product may overheat if used too close to the catalyst. Please order the required amount for your vehicle, as some models will require more than others. Weight: 130

Name: Ford Fiesta MK6 ST (30mm Oval Bracket)Product Notes: Suitable for vehicles with the 30mm wide oval lower engine mount bracket. Included within this pack are the following parts:PFF19-1101Front Wishbone Lower Front BushPFF19-1102Front Wishbone Lower Rear BushPFR19-1105Rear Beam Mounting BushPFF19-2001Lower Engine Mount Large Bush 30mm Oval BracketPFF19-2002Lower Engine Mount Small Bush 30mm Oval BracketThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 2671

Name: Front Anti Roll Bar Bush 16mmProduct Notes: Bush Size: 16mmWeight: 109

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 107

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 107

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 103

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 103

Name: Front Wishbone Front BushProduct Notes: Weight: 481Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Weight: 481Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: PFF19-1101G Front Wishbone Front Bush Camber Adjustable is made in our stiffest Black 95A material, reducing lateral movement of the wishbone under load and by way of the machined stainless steel sleeve and supplied spanner, it allows for up to +/- 0.5 of camber adjustment to fine-tune the setup for road or track use. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complement the sporty spirit of the Mk6 ST, and with PFF19-1101G, we have combined precision CNC-machined stainless steel with our signature Polyurethane materials to provide a more engaging and long-lasting driving experience.Our adjustable front wishbone front bush provides +/- 0.5 adjustment in camber to give you more control over your wheel alignment, letting you dial-in exactly the spec you need to perfect your build; be it for cruising the streets or clipping the apexes. The hexagonal head of the makes adjustment an easy job with the supplied spanner, and a knurled face ensures your camber is locked in tight once you've got it spot on.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1101G bush uses our Black 95A Polyurethane to reduce lateral slop in the wishbone under corner loads, whilst allowing for free articulation.Along with PFF19-1101G, we also makePFF19-1102G - Front Wishbone Rear Bush With Caster Increase; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your setup. Weight: 660Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: PFF19-1101G Front Wishbone Front Bush Camber Adjustable is made in our stiffest Black 95A material, reducing lateral movement of the wishbone under load and by way of the machined stainless steel sleeve and supplied spanner, it allows for up to +/- 0.5 of camber adjustment to fine-tune the setup for road or track use. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complement the sporty spirit of the Mk6 ST, and with PFF19-1101G, we have combined precision CNC-machined stainless steel with our signature Polyurethane materials to provide a more engaging and long-lasting driving experience.Our adjustable front wishbone front bush provides +/- 0.5 adjustment in camber to give you more control over your wheel alignment, letting you dial-in exactly the spec you need to perfect your build; be it for cruising the streets or clipping the apexes. The hexagonal head of the makes adjustment an easy job with the supplied spanner, and a knurled face ensures your camber is locked in tight once you've got it spot on.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1101G bush uses our Black 95A Polyurethane to reduce lateral slop in the wishbone under corner loads, whilst allowing for free articulation.Along with PFF19-1101G, we also makePFF19-1102G - Front Wishbone Rear Bush With Caster Increase; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your setup. Weight: 660Fitting Instructions

Name: Front Wishbone Lower Rear BushProduct Notes: Weight: 415

Name: Front Wishbone Rear BushProduct Notes: Weight: 415

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF19-1102G Front Wishbone Rear Bush Caster Offset is a CNC-machined Aluminium mount with an 80A durometer polyurethane bush providing approx. 1 of caster offset to improve in-corner camber gain without compromising straight-line traction as proven and tested on road and track. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complementthe sporty spirit of the Mk6 ST, and with PFF19-1102G, we have combined a precision CNC-machined Aluminium bracket with our signature Polyurethane materials to provide an even more engaging driving experience.Our custom-geometry front wishbone bracket provides 1 increase in caster to sharpen up turn-in characteristics and dynamic camber, giving the front-end of your Fiesta a boost in responsiveness and improving mid-corner grip, without compromising straight line acceleration or tyre wear.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1102G bracket uses our signature Polyurethane to reduce slop in the wishbone during acceleration and braking, with the Purple 80A Road Series bush being 35% stiffer than the OE rubber bush, and the 95A Black Series being a huge 80% stiffer.Along with PFF19-1102G, we also makePFF19-1101G - Front Wishbone Front Bush With Camber Adjustment; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your build. Weight: 1240Fitting Instructions

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF19-1102G Front Wishbone Rear Bush Caster Offset is a CNC-machined Aluminium mount with a 95A durometer polyurethane bush providing approx. 1 of caster offset to improve in-corner camber gain without compromising straight-line traction as proven and tested on road and track. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complement the sporty spirit of the Mk6 ST, and with PFF19-1102G, we have combined a precision CNC-machined Aluminium bracket with our signature Polyurethane materials to provide an even more engaging driving experience.Our custom-geometry front wishbone bracket provides 1 increase in caster to sharpen up turn-in characteristics and dynamic camber, giving the front-end of your Fiesta a boost in responsiveness and improving mid-corner grip, without compromising straight line acceleration or tyre wear.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1102G bracket uses our signature Polyurethane to reduce slop in the wishbone during acceleration and braking, with the Purple 80A Road Series bush being 35% stiffer than the OE rubber bush, and the 95A Black Series being a huge 80% stiffer.Along with PFF19-1102G, we also make PFF19-1101G - Front Wishbone Front Bush With Camber Adjustment; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your build. Weight: 1240Fitting Instructions

Name: Gearbox Mount InsertProduct Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Fits ST models only. Weight: 206Fitting Instructions

Name: Gearbox Mount Insert Product Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Fits ST models only. Weight: 206Fitting Instructions

Name: Jack Pad Adaptor Product Notes: PF19-860 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Ford C-Max MK1 (2003-2010),Ford C-Max MK2 (2011 ON),Ford Fiesta Mk7 (2008 - 2017),Ford Fiesta Mk7 ST (2013 - 2017),Ford Fiesta Mk6 inc ST (2002-2008),Ford Focus Mk1, Ford Focus Mk1 RS,Ford Focus Mk1 ST, Ford Focus MK2,Ford Focus MK2 RS, Ford Focus MK2 ST,Ford Focus Mk3, Ford Focus MK3 RS,Ford Focus Mk3 ST,Mazda Mazda 3 BK (2004-2009),Mazda Mazda 3 BL (2009-2013) Bush Size: 75mm DiameterWeight: 126

Name: Lower Engine Mount Large Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2001. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 518Fitting Instructions

Name: Lower Engine Mount Large Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2001. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 518Fitting Instructions

Name: Lower Engine Mount Large Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 523Fitting Instructions

Name: Lower Engine Mount Large Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 523Fitting Instructions

Name: Lower Engine Mount Small Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2002. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 275Fitting Instructions

Name: Lower Engine Mount Small Bush 25mm Oval BracketProduct Notes: This part fits models with thinner (25mm) oval brackets only. For thicker (30mm) oval bracket use PFF19-2002. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 275Fitting Instructions

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: PFF19-2002P is made from our 80A material, providing a stiffer alternative to PFF19-2002. Usually fitted with the larger PFF19-2001, it is aimed at those with modified vehicles, wanting a more connected engine and transmission feel. This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

Name: Lower Torque Mount, Fast RoadProduct Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020 Lower Engine Mount Bracket & Bushes (Yellow 70A) is 50% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Weight: 1058Fitting Instructions

Name: Lower Torque Mount, Fast Road/TrackProduct Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020P Lower Engine Mount Bracket & Bushes (Purple 80A) is 100% stiffer than OE and recommended for higher powered cars used on the road/track. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Weight: 1058Fitting Instructions

Name: Lower Torque Mount, Track Use Product Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020BLK Lower Engine Mount Bracket & Bushes (Black 95A) is a huge 400% stiffer than OE and available in our Black Series for hard Track and Motorsport use. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Weight: 1058Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 820Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 820Fitting Instructions