Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Fiesta MK8-8.5 inc ST (2017 on)

Ford Fiesta MK8 ST

Name: Ford Fiesta MK8 STProduct Notes: PF19K-1006 Handling Pack contains bushes that have been specifically selected to give the perfect combination of value versus performance with a price saving over buying the parts individually. Included within this pack are the following parts:PFF19-2201 Front Wishbone Front BushPFF19-2202 Front Arm Rear BushPFR19-2210 Rear Beam To Chassis BushPFF19-2224 Lower Engine Mount Insert Weight: 3013

4480.-

Front Anti Roll Bar Bush 21mm

Name: Front Anti Roll Bar Bush 21mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 21mmWeight: 98

420.-

Front Anti Roll Bar Bush 21mm

Name: Front Anti Roll Bar Bush 21mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 21mmWeight: 98

390.-

Front Anti Roll Bar Bush 22mm

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 98

390.-

Front Anti Roll Bar Bush 22mm

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 98

420.-

Front Arm Front Bush

Name: Front Arm Front BushProduct Notes: PFF19-2201 Front Arm Front Bush is made using our stiffest Black 95A material, reducing lateral movement of the wishbone. Weight: 405Fitting Instructions

530.-

Front Arm Front Bush

Name: Front Arm Front BushProduct Notes: PFF19-2201 Front Arm Front Bush is made using our stiffest Black 95A material, reducing lateral movement of the wishbone. Weight: 405Fitting Instructions

530.-

Front Arm Front Bush Camber Adjustable

Name: Front Arm Front Bush Camber AdjustableProduct Notes: PFF19-2201G Front Arm Front Bush Camber Adjust is made using our Black 95A material and features a machined stainless steel sleeve and spanner, allowing for up to +/- 0.5 of camber adjustment to fine-tune the setup for road or track use. Weight: 615Fitting Instructions

980.-

Front Arm Front Bush Camber Adjustable

Name: Front Arm Front Bush Camber AdjustableProduct Notes: PFF19-2201G Front Arm Front Bush Camber Adjust is made using our Black 95A material and features a machined stainless steel sleeve and spanner, allowing for up to +/- 0.5 of camber adjustment to fine-tune the setup for road or track use. Weight: 615Fitting Instructions

980.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: PFF19-2202 Front Arm Rear Bush uses a CNC machined and plated mild steel shell and our Black 95A bush with a tapered bore design to allow for articulation, whilst improving steering precision and braking stability. Weight: 1000Fitting Instructions

850.-

Front Wishbone Rear Bush Caster Adjustable

Name: Front Wishbone Rear Bush Caster AdjustableProduct Notes: PFF19-2202GBLK Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased by 250% over standard rubber. Weight: 1170Fitting Instructions

1420.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert.In our Red 65 Shore A material, the movement of the engine mount is reduced by almost half for a given load by the engine.For ultimate engine stability we recommend using our complete engine mount PFF19-2222. Weight: 75

460.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: Testing during the development of the engine mount to determine stiffness and the effect of fitting a Powerflex insert.In our Black Series 95 Shore A material, the movement of the engine mount is reduced by almost three times for a given load by the engine.For ultimate engine stability we recommend using our complete engine mount PFF19-2222. Weight: 75

500.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush InsertProduct Notes: Made in our softer Red 65A durometer material in consideration of Ford's 3-Cylinder engine, this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes; whilst reducing wheel-hop and improving the durability and longevity of the OE mount. Weight: 143

460.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush InsertProduct Notes: Made in our Black 95A material this is a cost-effective and easy-to-fit insert, designed to sharpen throttle response and add more precision to gear changes; whilst reducing wheel-hop and improving the durability and longevity of the OE mount. Weight: 143

500.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: PFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only. Weight: 95

510.-

Lower Torque Mount Large Bush Insert

Name: Lower Torque Mount Large Bush Insert Product Notes: PFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only. Weight: 95

460.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small Bush Product Notes: This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush. Bush Size: 40mmWeight: 112

510.-

Lower Torque Mount Small Bush

Name: Lower Torque Mount Small BushProduct Notes: This part fits 1.5L Ecoboost ST 200 models only with 40mm wide bush. Bush Size: 40mmWeight: 112

550.-

Lower Torque Mount, Fast Road

Name: Lower Torque Mount, Fast Road Product Notes: Features a CNC machined and laser-etched aluminium bracket and sleeve, with our signature Purple 80A durometer bushes, increasing stiffness over the OE mount by up to 400% at maximum load. PFF19-2226 Lower Torque Mountfeaturesa CNC machined and laser-etched aluminium bracketand sleeve, with oursignaturePurple80Adurometerbushes.POWERFLEX bushes will increase the stiffness over the OE mount by up to 400% at maximum load.Upgrading the torque mount has benefits including a sharper throttle response, reduced wheel hop, improved traction and more balanced on/off throttle handling.The Bracket is CNC machined out of 6082 Aluminium Weight: 697Fitting Instructions

2520.-

Lower Torque Mount, Fast Road

Name: Lower Torque Mount, Fast RoadProduct Notes: PFF19-2223 is a complete replacement mount for the original engine mount. For an insert only please use PFF19-2225. Fits 1.0L Ecoboost manual and automatic models. The combination of bush material grades used in our Lower Torque Mount PFF19-2223 suits fast road use. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road. For the more spirited drive, PFF19-2223P is for fast road/track use using a stiffer combination of bushes. With this, the NVH is increased but improved control of wheel spin/hop is achieved. For dedicated track cars or for those who don't mind a bit of additional NVH use PFF19-2223BLK for the ultimate in engine movement control. For ST models use PFF19-2222. Weight: 290Fitting Instructions

2270.-

Lower Torque Mount, Fast Road

Name: Lower Torque Mount, Fast RoadProduct Notes: Supplied as a Polyurethane bush and CNC machined bracket combination, the Purple 80A materials in PFF19-2222 suits fast road usage. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles. Weight: 650Fitting Instructions

2250.-

Lower Torque Mount, Fast Road/Track

Name: Lower Torque Mount, Fast Road/TrackProduct Notes: PFF19-2223 is a complete replacement mount for the original engine mount. For an insert only please use PFF19-2225. Fits 1.0L Ecoboost manual and automatic models. The combination of stiffer bush material grades used in our Lower Torque Mount, PFF19-2223P is for a more spirited drive more suited to fast road/track use. With this, there is a slight increase in NVH but improved control of wheel spin/hop is achieved. For fast road use on a car used daily, we would recommend PFF19-2223. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road. For dedicated track cars or for those who don't mind additional NVH PFF19-2223BLK is for the ultimate in engine movement control. For ST models use PFF19-2223P. Weight: 290Fitting Instructions

2270.-

Lower Torque Mount, Track Use

Name: Lower Torque Mount, Track UseProduct Notes: PFF19-2223 is a complete replacement mount for the original engine mount. For an insert only please use PFF19-2225. Fits 1.0L Ecoboost manual and automatic models. For dedicated track cars or for those who don't mind additional NVH PFF19-2223BLK uses our Black Series Bushes is for the ultimate in engine movement control. Offering maximum reduction in wheel spin/hop for those best-timed runs, direct drive - power to the road giving a more responsive drive. PFF19-2223P is more suited to fast road/track use, there is still a slight increase in NVH but not as harsh as our Black Series Mount but still offers improved control of wheel spin/hop. For fast road use on a car used daily, we would recommend PFF19-2223. With a minimal increase in NVH, reduced wheel hop and a more direct transition of power to the road. For ST models use PFF19-2222BLK. Weight: 290Fitting Instructions

2470.-

Lower Torque Mount, Track Use

Name: Lower Torque Mount, Track UseProduct Notes: Uses the same aluminium bracket and sleeve as PFF19-2226, but with our Black 95A durometer material increasing stiffness by a further 56%, for hard track and motorsport use. PFF19-2226BLK Lower Torque Mountfeaturesa CNC machined and laser-etched aluminium bracketand sleeve, with oursignatureBlack 95Adurometerbushes.PPF19-2226BLK increases the stiffness of the PFF19-2226 by by a further 56% for track and motorsport use.Upgrading the torque mount has benefits including a sharper throttle response, reduced wheel hop, improved traction and more balanced on/off throttle handling.The Bracket is CNC machined out of 6082 Aluminium Weight: 697Fitting Instructions

2780.-

Lower Torque Mount, Track Use

Name: Lower Torque Mount, Track UseProduct Notes: Supplied as a Polyurethane bush and CNC machined bracket combination for dedicated hard track or motorsport use, PFF19-2222BLK uses our Black Series 95A material offering a maximum reduction in wheel spin/hop for those best-timed runs. This is THE product for ultimate engine movement control but an increase in NVH should be expected when fitting. Weight: 650Fitting Instructions

2470.-

Rear Beam To Chassis Bush

Name: Rear Beam To Chassis BushProduct Notes: Made using our Purple 80A material to replace the soft rubber bushes, improving rear-end stability and handling. Weight: 1382Fitting Instructions

770.-

Rear Beam To Chassis Bush

Name: Rear Beam To Chassis BushProduct Notes: Made using our Black 95A material to replace the soft rubber bushes, improving rear-end stability and handling. Weight: 1382Fitting Instructions

850.-

Rear Spring Upper Isolator Pad

Name: Rear Spring Upper Isolator PadProduct Notes: PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable Purple 80 Shore A material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles. Weight: 133

470.-

Rear Spring Upper Isolator Pad

Name: Rear Spring Upper Isolator PadProduct Notes: PFR19-2030 is designed to eliminate creaks and squeaks from the rear springs. We have used our durable material to target reliability issues of the original part, since the softer OE specified foam quickly deteriorates, even on newer vehicles. Weight: 133

510.-

Viser 1 til 32 (av 40 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png