9-5 YS3G 2WD (2010 - 2012)

Name: Front Anti Roll Bar Bush 26.6mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 26.6mmWeight: 134

Name: Front Anti Roll Bar Bush 26.6mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 26.6mmWeight: 134

Name: Front Arm Front BushProduct Notes: Weight: 427Fitting Instructions

Name: Front Arm Front BushProduct Notes: Weight: 427

Name: Front Arm Rear BushProduct Notes: PFF80-1502 Front Arm Rear Bush uses a rotating sleeve design to eliminate the common cause of the original bush failing due to the twisting forces acting on the rubber bush. Testing during development has proven our road series purple part to be 14% stiffer than the original rubber bush. Our Black Series material boosts stiffness by over 100% v.s. the original rubber bush, making it ideal for Track or Motorsport applications. Weight: 1020Fitting Instructions

Name: Front Arm Rear BushProduct Notes: PFF80-1502 Front Arm Rear Bush uses a rotating sleeve design to eliminate the common cause of the original bush failing due to the twisting forces acting on the rubber bush. Testing during development has proven our road series purple part to be 14% stiffer than the original rubber bush. Our Black Series material boosts stiffness by over 100% v.s. the original rubber bush, making it ideal for Track or Motorsport applications. Weight: 1020Fitting Instructions

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol and diesel models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting Insert (Diesel)Product Notes: Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Rear Anti Roll Bar Bush 20mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 112

Name: Rear Anti Roll Bar Bush 20mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20Weight: 112

Name: Rear Engine Mounting Insert Product Notes: Fits 1.6 and 1.8L petrol models excluding 4WD models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Weight: 349

Name: Rear Engine Mounting Insert Product Notes: Fits 1.6 and 1.8L petrol models excluding 4WD models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Weight: 349

Name: Rear Engine Mounting InsertProduct Notes: This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Weight: 339

Name: Rear Engine Mounting InsertProduct Notes: This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Recommended for petrol models. For diesel models use PFF80-1421R. Weight: 339

Name: Rear Engine Mounting Insert Diesel Product Notes: This part is designed to limit movement of the original voided rubber mount whilst being mindful of vibration transmitted to the vehicle and is recommended for diesel models. Weight: 339

Name: Rear Lower Arm Inner Bush Product Notes: Weight: 734

Name: Rear Lower Arm Inner Bush Product Notes: Weight: 734

Name: Rear Lower Arm Outer Bush Product Notes: Weight: 686

Name: Rear Lower Arm Outer Bush Product Notes: Weight: 686

Name: Rear Toe Link Arm Bush Product Notes: Weight: 896

Name: Rear Toe Link Arm Bush Product Notes: Weight: 896

Name: Rear Trailing Arm Bush Product Notes: PFR80-1517 Rear Trailing Arm Bush rectifies the commonly failed rear trailing arm bush due to twisting. Flexibility and articulation is also maintained through suspension travel from the use of our dual compound design. Weight: 1101Fitting Instructions

Name: Rear Trailing Arm Bush Product Notes: PFR80-1517 Rear Trailing Arm Bush rectifies the commonly failed rear trailing arm bush due to twisting. Flexibility and articulation is also maintained through suspension travel from the use of our dual part design. Weight: 1101Fitting Instructions

Name: Rear Upper Arm Inner Bush Product Notes: Weight: 542

Name: Rear Upper Arm Inner Bush Product Notes: Weight: 542

Name: Rear Upper Arm Outer Bush Product Notes: Weight: 542

Name: Rear Upper Arm Outer Bush Product Notes: Weight: 542