GR Yaris (2020-2024)

Name: Exhaust MountProduct Notes: Bush Size: 70mm x 35mm x 11.7mmWeight: 92Fitting Instructions

Name: Front Anti Roll Bar Bush 23.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits standard models with a 23.2mm bar. Bush Size: 23.2 mmWeight: 226Fitting Instructions

Name: Front Anti-Roll Bar Bush 23.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits standard models with a 23.2mm bar. Bush Size: 23.2 mmWeight: 226Fitting Instructions

Name: Front Anti-Roll Bar Bush 24.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits Circuit Pack equipped models with the upgraded 24.2mm bar. Bush Size: 24.2 mmWeight: 226Fitting Instructions

Name: Front Anti-Roll Bar Bush 24.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits Circuit Pack equipped models with the upgraded 24.2mm bar. Bush Size: 24.2 mmWeight: 226Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: PFF76-902G Front Wishbone Rear Bush has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings and also includes 5mm anti-lift properties. Vertical stiffness is increased by 250% over standard rubber. PFF76-902G has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings. PFF76-902G also provides 5mm anti-lift properties.Vertical stiffness is increased by 250% over standard rubber. Weight: 1382Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: PFF76-902G Front Wishbone Rear Bush has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings and also includes 5mm anti-lift properties. Vertical stiffness is increased by 250% over standard rubber. PFF76-902G has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings. PFF76-902G also provides 5mm anti-lift properties.Vertical stiffness is increased by 250% over standard rubber. Weight: 1382Fitting Instructions

Name: Lower Torque Mount InsertProduct Notes: PFF76-920BLK Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM torque mounting for performance on the race circuit or the rally stage. This reduces the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel, as well as reducing wheel-hop and improving traction. PFF76-920BLK can be fitted alone but will perform most effectively when fitted with our other powertrain inserts (PFF76-923BLK & PFF76-925BLK) as a full set. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Our POWERFLEX PFF76-920 Lower Torque Mount increases the stiffness of the OEM powertrain mounts using our Black 95A material. Weight: 65Fitting Instructions

Name: Lower Torque Mount InsertProduct Notes: PFF76-920 Torque Mount Bush Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM torque mounting. This reduces the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel, as well as reducing wheel-hop and improving traction. PFF76-920can be fitted alone but will perform most effectively when fitted with our other powertrain inserts (PFF76-923 & PFF76-925) as a full set. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Our POWERFLEX PFF76-920 Lower Torque Mount increases the stiffness of the OEM powertrain mounts using our yellow 70A material. Weight: 65Fitting Instructions

Name: PowerAlign Camber Bolt Kit (12mm x 70mm)Product Notes: PFA100-12-70 PowerAlign Rear Upper Arm Outer Camber BoltKit is a cost-effective and easily fitted alternative to the more extreme and expensive adjustable arm kits (300 - 500) that are available on the market andallows for up to +/- 1.0 of on-carcamber adjustment to the rear suspension geometry. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M12 x 70mmWeight: 189Fitting Instructions

Name: PowerAlign Camber Bolt Kit (17mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M17 x 75mmWeight: 359Fitting Instructions

Name: Rear Anti-Roll Bar Bush 21.3mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits all models with a 21.3mm rear bar. Bush Size: 21.3 mmWeight: 254Fitting Instructions

Name: Rear Anti-Roll Bar Bush 21.3mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits all models with a 21.3mm rear bar. Bush Size: 21.3 mmWeight: 254Fitting Instructions

Name: Upper Engine Mount InsertProduct Notes: PFF76-925 Upper Engine Mount Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM upper engine mounting. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker. We recommend fitting PFF76-925 alongside our other Yaris GR powertrain inserts (PFF76-920 & PFF76-923), as they perform much more effectively as a full set. There will be a minor increase in NVH when stiffening the powertrain mountings. PFF76-925 is made from our Yellow 70A material and works bystiffening the OEM powertrain mounts reducing the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel. Weight: 89Fitting Instructions

Name: Upper Engine Mount InsertProduct Notes: PFF76-925BLK Upper Engine Mount Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM upper engine mounting for performance on the race circuit or the rally stage. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker. We recommend fitting PFF76-925BLK alongside our other Yaris GR powertrain inserts (PFF76-920BLK & PFF76-923BLK), as they perform much more effectively as a full set. There will be an increase in NVH when fitting Black series inserts. PFF76-925 is made from our Black 95A material and works bystiffening the OEM powertrain mounts reducing the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel. Weight: 89Fitting Instructions

Name: Upper Gearbox Mount InsertProduct Notes: PFF76-923 Upper Gearbox Mount Insert is an affordable and easy-to-fit bush insert made from our Yellow 70A Durometer vibration-absorbing material, which works to stiffen the OEM upper gearbox mounting. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker. We recommend fitting PFF76-923 alongside our other Yaris GR powertrain inserts (PFF76-920 & PFF76-925), as they perform much more effectively as a full set. There will be a minor increase in NVH when stiffening the powertrain mountings. PFF76-923 is made from our Yellow 70A material and works bystiffening the OEM powertrain mounts reducing the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel. Weight: 52Fitting Instructions

Name: Upper Gearbox Mount InsertProduct Notes: PFF76-923BLK Upper Gearbox Mount Insert is an affordable and easy-to-fit bush insert made from our Black 95A Durometer high-performance material, which works to significantly stiffen the OEM upper gearbox mounting for performance on the race circuit or the rally stage. This reduces twist of the engine under acceleration and during gear changes, giving the pedals a more direct feel, as well as reducing wheel-hop and letting you get the power down that little bit quicker. We recommend fitting PFF76-923BLK alongside our other Yaris GR powertrain inserts (PFF76-920BLK & PFF76-925BLK), as they perform much more effectively as a full set. There will be an increase in NVH when fitting Black series inserts. PFF76-923BLK is made from our Black 95A material and works bystiffening the OEM powertrain mounts reducing the amount of engine/trans roll and movement during hard acceleration and gear changing for a more responsive feel. Weight: 52Fitting Instructions