Chevrolet

Name: Front Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 121

Name: Front Anti Roll Bar Bush 26.6mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 26.6mmWeight: 134

Name: Front Anti Roll Bar Bush 26.6mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 26.6mmWeight: 134

Name: Front Arm Front BushProduct Notes: Weight: 427

Name: Front Arm Front BushProduct Notes: Weight: 427Fitting Instructions

Name: Front Arm Rear BushProduct Notes: PFF80-1502 Front Arm Rear Bush uses a rotating sleeve design to eliminate the common cause of the original bush failing due to the twisting forces acting on the rubber bush. Testing during development has proven our road series purple part to be 14% stiffer than the original rubber bush. Our Black Series material boosts stiffness by over 100% v.s. the original rubber bush, making it ideal for Track or Motorsport applications. Weight: 1020Fitting Instructions

Name: Front Arm Rear BushProduct Notes: PFF80-1502 Front Arm Rear Bush uses a rotating sleeve design to eliminate the common cause of the original bush failing due to the twisting forces acting on the rubber bush. Testing during development has proven our road series purple part to be 14% stiffer than the original rubber bush. Our Black Series material boosts stiffness by over 100% v.s. the original rubber bush, making it ideal for Track or Motorsport applications. Weight: 1020Fitting Instructions

Name: Front Control Arm Front BushProduct Notes: Weight: 445

Name: Front Control Arm Front BushProduct Notes: Weight: 445

Name: Front Control Arm Rear BushProduct Notes: Weight: 823Fitting Instructions

Name: Front Control Arm Rear BushProduct Notes: Weight: 823Fitting Instructions

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol and diesel models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting Insert (Diesel)Product Notes: Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Track Control Arm Inner BushProduct Notes: Weight: 178

Name: Front Track Control Arm Outer BushProduct Notes: Weight: 161

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: Rear Anti Roll Bar Bush 20mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 112

Name: Rear Anti Roll Bar Bush 20mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 20Weight: 112

Name: Rear Beam Mounting BushProduct Notes: Weight: 955

Name: Rear Beam Mounting BushProduct Notes: PFR80-1410 fits vehicles with Watt's linkage. For vehicles without Watt's linkage, please use PFR80-1310. Weight: 956

Name: Rear Beam Mounting BushProduct Notes: PFR80-1410 fits vehicles with Watt's linkage. For vehicles without Watt's linkage, please use PFR80-1310. Weight: 956

Name: Rear Engine Mounting InsertProduct Notes: This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Recommended for petrol models. For diesel models use PFF80-1421R. Weight: 339

Name: Rear Engine Mounting InsertProduct Notes: This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Weight: 339

Name: Rear Engine Mounting Insert Diesel Product Notes: This part is designed to limit movement of the original voided rubber mount whilst being mindful of vibration transmitted to the vehicle and is recommended for diesel models. Weight: 339

Name: Rear Lower Arm Inner Bush Product Notes: Weight: 734

Name: Rear Lower Arm Inner Bush Product Notes: Weight: 734

Name: Rear Lower Arm Outer Bush Product Notes: Weight: 686

Name: Rear Lower Arm Outer Bush Product Notes: Weight: 686

Name: Rear Panhard Rod Outer BushProduct Notes: Weight: 358

Name: Rear Panhard Rod Outer BushProduct Notes: Weight: 358

Name: Rear Toe Link Arm Bush Product Notes: Weight: 896