V40 (2012 - 2019)

Name: Exhaust MountProduct Notes: This product may overheat if used too close to the catalyst. Please order the required amount for your vehicle, as some models will require more than others. Weight: 130

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Please check bar diameter before ordering. Bush Size: 21mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Please check bar diameter before ordering. Bush Size: 21mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 205

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 205

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Please check bar diameter before ordering. Bush Size: 22mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Please check bar diameter before ordering. Bush Size: 22mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 23mmProduct Notes: Please check bar diameter before ordering. Bush Size: 23mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 24mmProduct Notes: Please check bar diameter before ordering. Bush Size: 24mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 24mmProduct Notes: Please check bar diameter before ordering. Bush Size: 24mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 25.5mmProduct Notes: Please check bar diameter before ordering. Bush Size: 25.5mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 25.5mmProduct Notes: Please check bar diameter before ordering. Bush Size: 25.5mmWeight: 181

Name: Front Lower Wishbone Rear BushProduct Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

Name: Front Lower Wishbone Rear Bush Product Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

Name: Front Upper Right Engine Mount InsertProduct Notes: This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 320Fitting Instructions

Name: Front Upper Right Engine Mount InsertProduct Notes: This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 320Fitting Instructions

Name: Front Wishbone Front Bush 14mm boltProduct Notes: PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801. Bush Size: 14mm boltWeight: 535

Name: Front Wishbone Front Bush 14mm boltProduct Notes: PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801. Bush Size: 14mm boltWeight: 535

Name: Front Wishbone Front Bush Camber Adjustable 14mm BoltProduct Notes: 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt. Bush Size: 14mmWeight: 764Fitting Instructions

Name: Front Wishbone Front Bush Camber Adjustable 14mm BoltProduct Notes: 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt. Bush Size: 14mmWeight: 764Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1802GBLKadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1802G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Black Shore 80A Black Series material, PFF19-1802G is 85% stiffer than the original rubber bush for those looking for a Track/Competition option, whilst our Purple Shore 95A Road Series material is 10% stiffer than the original bush. Weight: 3464Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1802G is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1802Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1802G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Purple Shore 80A Road Series material, PFF19-1802G is 10% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 85% stiffer than the original for those looking for a Track/Competition option. Weight: 3464Fitting Instructions

Name: Gearbox Mount Insert Product Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 254Fitting Instructions

Name: Gearbox Mount InsertProduct Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 254Fitting Instructions

Name: Lower Engine Mount Small BushProduct Notes: Weight: 144Fitting Instructions

Name: Lower Engine Mount Small BushProduct Notes: Weight: 144Fitting Instructions

Name: Rear Anti Roll Bar To Chassis Bush 18mmProduct Notes: Bush Size: 18mmWeight: 205

Name: Rear Anti Roll Bar To Chassis Bush 18mmProduct Notes: Bush Size: 18mmWeight: 205

Name: Rear Anti Roll Bar To Chassis Bush 20mm Product Notes: Fits Focus MK3 RS only. Please check anti roll bar diameter before ordering. Bush Size: 20mmWeight: 205

Name: Rear Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 205

Name: Rear Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 205

Name: Rear Lower Control Arm BushProduct Notes: Weight: 510Fitting Instructions