Fiesta Mk7 inc ST (2008 - 2017)

Name: Exhaust MountProduct Notes: Weight: 61Fitting Instructions

Name: Ford Fiesta MK7 STProduct Notes: Included within this pack are the following parts:PFF19-1531Front Wishbone Front BushPFF19-1502GFront Arm Rear Bush, Caster AdjustablePFR19-1511Rear Beam To Chassis BushPFF19-2001Lower Engine Mount Large Bush 30mm Oval BracketPFF19-2002Lower Engine Mount Small Bush 30mm Oval BracketThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 3022

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 19mmWeight: 98

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 19mmWeight: 98

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 98

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Please check the anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 98

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 22mmWeight: 120

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 22mmWeight: 120

Name: Front Upper Engine Mount InsertProduct Notes: This is an insert to fit into the original mount to limit movement of the engine to provide stability under acceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted Weight: 62Fitting Instructions

Name: Front Upper Engine Mount InsertProduct Notes: This is an insert to fit into the original mount to limit movement of the engine to provide stability under acceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted Weight: 62Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Bush Size: 14mm boreWeight: 315

Name: Front Wishbone Front BushProduct Notes: Bush Size: 14mm boreWeight: 315

Name: Front Wishbone Front BushProduct Notes: Weight: 315

Name: Front Wishbone Front BushProduct Notes: Weight: 315

Name: Front Wishbone Rear BushProduct Notes: Weight: 1000Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF19-2202 Front Arm Rear Bush uses a CNC machined and plated mild steel shell and our Black 95A bush with a tapered bore design to allow for articulation, whilst improving steering precision and braking stability. Weight: 1000Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree. Weight: 726Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree. Weight: 726Fitting Instructions

Name: Jack Pad Adaptor Product Notes: PF19-860 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Ford C-Max MK1 (2003-2010),Ford C-Max MK2 (2011 ON),Ford Fiesta Mk7 (2008 - 2017),Ford Fiesta Mk7 ST (2013 - 2017),Ford Fiesta Mk6 inc ST (2002-2008),Ford Focus Mk1, Ford Focus Mk1 RS,Ford Focus Mk1 ST, Ford Focus MK2,Ford Focus MK2 RS, Ford Focus MK2 ST,Ford Focus Mk3, Ford Focus MK3 RS,Ford Focus Mk3 ST,Mazda Mazda 3 BK (2004-2009),Mazda Mazda 3 BL (2009-2013) Bush Size: 75mm DiameterWeight: 126

Name: Lower Engine Mount Large Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 523Fitting Instructions

Name: Lower Engine Mount Large Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2003. For a complete mount with pre-installed bushes use PFF19-2020. Weight: 523Fitting Instructions

Name: Lower Engine Mount Large Bush Round BracketProduct Notes: This part fits brackets with a round bore. For brackets with an oval bore, please use PFF19-2001. A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 382

Name: Lower Engine Mount Large Bush Round BracketProduct Notes: This part fits brackets with a round bore. For brackets with an oval bore, please use PFF19-2001BLK. A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 382

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: PFF19-2002P is made from our 80A material, providing a stiffer alternative to PFF19-2002. Usually fitted with the larger PFF19-2001, it is aimed at those with modified vehicles, wanting a more connected engine and transmission feel. This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

Name: Lower Engine Mount Small Bush 30mm Oval BracketProduct Notes: This part fits models with thicker (30mm) oval brackets only. For thinner (25mm) oval bracket use PFF19-2004. For a complete mount with pre-installed small and large bushes use PFF19-2020 which replaces both round and oval bracket shapes. Fits oval bracket only (left). Weight: 278Fitting Instructions

Name: Lower Engine Mount Small Bush Round BracketProduct Notes: A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 270Fitting Instructions

Name: Lower Engine Mount Small Bush Round BracketProduct Notes: A small increase in NVH should be expected when stiffening the connecting mount between the engine/transmission and chassis, especially on 3-cylinder and diesel engines. The harder the material used, the greater the NVH transmitted. This should be considered as a performance upgrade. Weight: 270Fitting Instructions

Name: Lower Torque Mount, Fast RoadProduct Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020 Lower Engine Mount Bracket & Bushes (Yellow 70A) is 50% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Weight: 1058Fitting Instructions

Name: Lower Torque Mount, Fast Road/TrackProduct Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020P Lower Engine Mount Bracket & Bushes (Purple 80A) is 100% stiffer than OE and recommended for higher powered cars used on the road/track. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Weight: 1058Fitting Instructions

Name: Lower Torque Mount, Track Use Product Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-2020BLK Lower Engine Mount Bracket & Bushes (Black 95A) is a huge 400% stiffer than OE and available in our Black Series for hard Track and Motorsport use. Original rubber engine mounts can quickly become cracked and perished, causing excessive engine movement. Weight: 1058Fitting Instructions

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions