147 (2000-2010), 156 (1997-2007), GT (2003-2010)

Name: Engine Mount Stabiliser to Chassis BushProduct Notes: Fits Alfa 147 & 156 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa 145 & 146 1.4, 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa GTV & Spider (916) 1.8 & 2.0 16v models with extruded bracket. Weight: 156Fitting Instructions

Name: Engine Mount Stabiliser to Chassis BushProduct Notes: Fits Alfa 147 & 156 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa 145 & 146 1.4, 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa GTV & Spider (916) 1.8 & 2.0 16v models with extruded bracket. Weight: 156Fitting Instructions

Name: Engine Mount Stabiliser to Chassis BushProduct Notes: Fits Alfa 147 & 156 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa 145 & 146 1.4, 1.6 & 1.8 16v Twin Spark models with extruded bracket. Fits Alfa GTV & Spider (916) 1.8 & 2.0 16v models with extruded bracket. Weight: 156Fitting Instructions

Name: Engine Mount to Stabiliser BushProduct Notes: Weight: 154

Name: Engine Mount to Stabiliser BushProduct Notes: Weight: 154

Name: Engine Mount to Stabiliser BushProduct Notes: Weight: 154

Name: Engine Stabiliser Mounting BushProduct Notes: Fits the engine and chassis position on V6 & 1.9 JTD/JTDM models only. Weight: 273Fitting Instructions

Name: Engine Stabiliser Mounting BushProduct Notes: Fits the engine and chassis position on V6 & 1.9 JTD/JTDM models only. Weight: 273Fitting Instructions

Name: Exhaust MountProduct Notes: Weight: 74Fitting Instructions

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Bush Size: 22mmWeight: 109

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Bush Size: 22mmWeight: 109

Name: Front Anti Roll Bar Bush 23mmProduct Notes: Bush Size: 23mmWeight: 111

Name: Front Anti Roll Bar Bush 23mmProduct Notes: Bush Size: 23mmWeight: 111

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 24mmWeight: 109

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 24mmWeight: 109

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits Eibach Sports Anti Roll Bars Bush Size: 26mmWeight: 87

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits Eibach Sports Anti Roll Bars Bush Size: 26mmWeight: 87

Name: Front Lower Wishbone Front BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-811 with the more popular 19mm bore sleeve, but we have seen wishbones with 20mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 372Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-811 with the more popular 19mm bore sleeve, but we have seen wishbones with 20mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 372Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 656Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: We have found that there can be a difference in the end-pin diameter on some wishbones, especially non-genuine replacements. We supply PFF1-812 with the more popular 20mm bore sleeve, but we have seen wishbones with 21.3mm end pins. If you find the ones supplied are incorrect for your vehicle, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. PFF1-812 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 656Fitting Instructions

Name: Front Shock Lower BushProduct Notes: Weight: 675

Name: Front Shock Lower BushProduct Notes: Weight: 675

Name: Front Upper Arm BushProduct Notes: Weight: 566Fitting Instructions

Name: Front Upper Arm BushProduct Notes: Weight: 566Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Anti Roll Bar Bush 14mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 14mmWeight: 63

Name: Rear Anti Roll Bar Bush 14mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 14mmWeight: 63

Name: Rear Anti Roll Bar Bush 16mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 16mmWeight: 63

Name: Rear Anti Roll Bar Bush 16mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 16mmWeight: 63

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 18mmWeight: 63

Name: Rear Anti Roll Bar Bush 18mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 18mmWeight: 63