Lancer Evolution IV, V & VI RS-GSR (1996 - 2001)

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Bush Size: 23mmWeight: 79

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Bush Size: 23mmWeight: 79

Name: Front Lower Diff Mount (Road)Product Notes: PFF44-108R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 62mm Diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 70.5mm DiameterWeight: 330

Name: Front Lower Diff Mount (Track)Product Notes: PFF44-108 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 62mm Diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 70.5mm DiameterWeight: 330

Name: Front Lower Front Engine Mount (MSport)Product Notes: PFF44-106BLK is made in our Black 95A material and recommend for motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Bush Size: 81mmWeight: 454

Name: Front Lower Front Engine Mount (Road)Product Notes: PFF44-106R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Bush Size: 81mmWeight: 454

Name: Front Lower Front Engine Mount (Track)Product Notes: PFF44-106 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Bush Size: 81mmWeight: 454

Name: Front Lower Rear Diff Mount (MSport)Product Notes: PFF44-108BLK is made in our Black 95A material and recommend for motosport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 62mm Diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 70.5mm DiameterWeight: 330

Name: Front Lower Rear Diff Mount (MSport)Product Notes: PFF44-107BLK is made in our Black 95A material and recommend for motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

Name: Front Lower Rear Diff Mount (Road)Product Notes: PFF44-107R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

Name: Front Lower Rear Diff Mount (Track)Product Notes: PFF44-107 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please check the size before ordering. PFF44-107 is 60mm in diameter, whilst PFF44-108 is 70.5mm in diameter. Bush Size: 60mm DiameterWeight: 268

Name: Front Upper Engine/Trans Mount (MSport)Product Notes: This bush fits both the Upper Engine and Gearbox Mount positions. PFF44-105BLK is made in our Black 95A material and recommend for motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 1500Fitting Instructions

Name: Front Upper Engine/Trans Mount (Road)Product Notes: This bush fits both the Upper Engine and Gearbox Mount positions. PFF44-105R is made in our Yellow 70A material and recommend for road use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 1500Fitting Instructions

Name: Front Upper Engine/Trans Mount (Track)Product Notes: This bush fits both the Upper Engine and Gearbox Mount positions. PFF44-105 is made in our Purple 80A material and recommend for track use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 1500Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: This bush uses a 12mm bolt. For a 14mm bolt, use PFF44-1011-14. Weight: 303

Name: Front Wishbone Front BushProduct Notes: This bush uses a 12mm bolt. For a 14mm bolt, use PFF44-1011-14BLK. Weight: 303

Name: Front Wishbone Rear BushProduct Notes: Does not fit the EVO 7 Weight: 541

Name: Front Wishbone Rear BushProduct Notes: Does not fit the EVO 7 Weight: 541

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: Rear Anti Roll Bar Mounting 18mmProduct Notes: Fits EVO 6 RS Bush Size: 18mmWeight: 78

Name: Rear Anti Roll Bar Mounting 18mmProduct Notes: Fits EVO 6 RS Bush Size: 18mmWeight: 78

Name: Rear Anti Roll Bar Mounting 21mmProduct Notes: Bush Size: 21mmWeight: 66

Name: Rear Anti Roll Bar Mounting 21mmProduct Notes: Bush Size: 21mmWeight: 66

Name: Rear Diff Front Mounting BushProduct Notes: Fits AYC rear differentials only. Does not fit RS Models, for RS models use PFR44-420 Bush Size: 54mmWeight: 513

Name: Rear Diff Front Mounting BushProduct Notes: Fits AYC rear differentials only. Does not fit RS models. For RS models use PFR44-420. Bush Size: 54mmWeight: 513

Name: Rear Diff Front Mounting Bush, RS OnlyProduct Notes: Fits RS and non-AYC vehicles only. For vehicles fitted with AYC use PFR44-120 Bush Size: 45mmWeight: 598Fitting Instructions

Name: Rear Diff Front Mounting Bush, RS OnlyProduct Notes: Fits RS and non-AYC vehicles only. For vehicles fitted with AYC use PFR44-120 Bush Size: 45mmWeight: 598Fitting Instructions

Name: Rear Diff Rear Mounting BushProduct Notes: Weight: 393

Name: Rear Diff Rear Mounting BushProduct Notes: Weight: 393

Name: Rear Lower Control Arm Inner BushProduct Notes: This bush only fits EVO 4 & 5. For EVO 6 & 7 use PFR44-111BLK. Weight: 435

Name: Rear Lower Control Arm Inner BushProduct Notes: This bush only fits EVO 4 & 5. For EVO 6 use PFR44-111. Weight: 435

Name: Rear Lower Control Arm Inner BushProduct Notes: Fits EVO 6, 7, 8 & 9 only. For Evo 4 & 5 use PFR44-113BLK. Weight: 570