Cube (2009 on )

Name: Front Arm Front BushProduct Notes: Weight: 250

Name: Front Arm Front BushProduct Notes: Weight: 250

Name: Front Arm Rear BushProduct Notes: Weight: 781Fitting Instructions

Name: Front Arm Rear BushProduct Notes: Weight: 781Fitting Instructions

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902. Weight: 781Fitting Instructions

Name: Front Arm Rear Bush Caster Offset Product Notes: PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902. Weight: 781Fitting Instructions

Name: Lower Torque Mount - Fast Road/TrackProduct Notes: PFF60-8025P is a further 20% stiffer than PFF60-8025 being made solely in our Purple 80A durometer material and is recommended for more heavily tuned road or occasional track cars. A small increase in NVH, usually at idle should be expected when stiffening the connecting mount between the engine/transmission and subframe. For an insert only use PFF60-820 (only fits pressed, rubber-coated OEM mount). Weight: 770Fitting Instructions

Name: Lower Torque Mount - RoadProduct Notes: PFF60-8025 is significantly stiffer than the OE mount and recommended for standard or mildly tuned road cars, using a combination of our Yellow 70A and Purple 80A durometer materials. A small increase in NVH, usually at idle should be expected when stiffening the connecting mount between the engine/transmission and subframe. Weight: 770Fitting Instructions

Name: Lower Torque Mount - Track/MsportProduct Notes: PFF60-8025BLK sees both bushes being made in our hardest Black 95A durometer material, providing the stiffest link between engine and chassis, for hard track and motorsport use.. An increase in NVH should be expected when fitting this part. For an insert only, use PFF60-820 (only fits pressed, rubber-coated OEM mount). Not suitable for diesels. Weight: 770Fitting Instructions

Name: PowerAlign Camber Bolt Kit (14mm) Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M14 x 70mm Weight: 261 Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 932Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 932Fitting Instructions