Jetta MK4 A4 (1999-2005)

Name: Exhaust MountProduct Notes: Bush Size: 70mm x 35mm x 11.7mmWeight: 92Fitting Instructions

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 65

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 65

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 65

Name: Front Anti Roll Bar Link Bush KitProduct Notes: Fits metal link rods only. For plastic link rods, use PFF85-413. These parts will not fit link rods with ball joint ends. Weight: 230Fitting Instructions

Name: Front Anti Roll Bar Link Bush KitProduct Notes: Fits plastic link rods only, for aluminium link rods use PFF85-412. Not for link rods with ball joints on the ends. Weight: 218Fitting Instructions

Name: Front Anti Roll Bar Link Bush KitProduct Notes: Fits plastic link rods only, for aluminium link rods use PFF85-412. Not for link rods with ball joints on the ends. Weight: 218Fitting Instructions

Name: Front Anti Roll Bar Link Bush KitProduct Notes: Fits plastic link rods only, for aluminium link rods use PFF85-412. Not for link rods with ball joints on the ends. Weight: 218Fitting Instructions

Name: Front Anti Roll Bar Link Bush KitProduct Notes: Fits metal link rods only. For plastic link rods, use PFF85-413. These parts will not fit link rods with ball joint ends. Weight: 230

Name: Front Anti Roll Bar Link Bush KitProduct Notes: Fits metal link rods only. For plastic link rods, use PFF85-413. These parts will not fit link rods with ball joint ends. Weight: 230Fitting Instructions

Name: Front Anti Roll Bar Mount 21mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 21mmWeight: 62

Name: Front Anti Roll Bar Mount 21mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 21mmWeight: 62

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23mmWeight: 59

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23mmWeight: 59

Name: Front Anti Roll Bar Mount 23mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23mmWeight: 59

Name: Front Engine Mount Dog Bone (Diesel)Product Notes: Made in our softer Grey 65A material, PFF85-420R is intended for standard diesel vehicles. For petrol or modified diesel vehicles, please use PFF85-420. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Diesel)Product Notes: Made in our softer Red 65A material, PFF85-420R is intended for standard diesel vehicles. For petrol or modified diesel vehicles, please use PFF85-420. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Motorsport)Product Notes: Made in our hardest Black 95A material, this product is best suited to Track / Motorsport use. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated partPFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Petrol/Tuned Diesel)Product Notes: Made in our Yellow 70A material, PFF85-420 is intended for petrol or tuned diesel vehicles. For significantly tuned petrol or diesel vehicles, or those being used on track, please use PFF85-420BLK. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated part PFF85-505 Weight: 239

Name: Front Engine Mount Dog Bone (Petrol/Tuned Diesel)Product Notes: Made in our Grey 70A material, PFF85-420 is intended for petrol or tuned diesel vehicles. For significantly tuned petrol or diesel vehicles, or those being used on track, please use PFF85-420BLK. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Please have a look at this quick guide on how to fit PFF85-420 and associated part PFF85-505 Weight: 239

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount BushProduct Notes: Weight: 618Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430H. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430BLK. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush -10mmProduct Notes: This part has been designed to reduce the ride height by 10mm when fitted as it allows the strut to sit higher into the body of the top mount. It is supplied with a new top cap spacer made using our 95A durometer material, meaning no more modifying of original parts. For standard ride height top mounts, please use PFF85-430. Bush Size: -10mmWeight: 591Fitting Instructions

Name: Front Strut Top Mount Bush WasherProduct Notes: PFF85-431W Front Strut Top Spacer (as normally supplied with PFF85-431 and now available separately) is a simple and cost-effective interim solution that fits and works with the OE Strut Top Cap to fill the gap and prevents binding up on the PU Spacer as the suspension turns. Fitting couldnt be easier either. Simply remove the existing Strut Top Cap from the car, separate the rubber ring from it, press the Cap into our Spacer and then refit it! NB; fitting this part is only recommended if the installed Top Mount is in good condition and there is a gap of at least 12mm between the top cap and body. If the OE mount has collapsed, you will need to replace the entire mount with PFF85-430 or PFF85-431. Bush Size: 18mmWeight: 112

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Subframe Rear BushProduct Notes: Weight: 305Fitting Instructions

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201G. Bush Size: 30mmWeight: 263

Name: Front Wishbone Front Bush 30mmProduct Notes: If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a larger 45mm bush PFF3-501. For an on-car camber adjustable version of this bush please use PFF85-201GBLK. Bush Size: 30mmWeight: 263