Alpine

Name: Gearbox Mounting Bush InsertProduct Notes: PFF60-1421 Gearbox Mounting Bush Insert is a two-part kit that acts to stiffen the upper and lower voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF60-1420 Upper Engine Mount Insert and PFF60-1422 Lower Torque Mount Weight: 124Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: Made using our Black 95A durometer material, PFF60-1421BLK Gearbox Mounting Bush Insert is a two-part kit that acts to stiffen the upper and lower voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF60-1420BLK Upper Engine Mount Insert and PFF60-1422BLK Lower Torque Mount. Weight: 124Fitting Instructions

Name: Lower Torque Mount - Fast Road/TrackProduct Notes: PFF60-8026 Lower Torque Mount featuresa CNC machined and laser-etched aluminium bracket, combining ourPurple 80A and Black 95A durometermaterials and is recommended for more heavily tuned road or occasional track cars. Reducing engine/transmovement by way of an upgradedtorque mount has the following benefits:Sharper throttle responseMore accurate gear changesReduced wheel-hopImproved TractionMore balanced on/off throttle handlingThe two-part composite design of the larger bush improves the mount's durability in high-power applications, whilst still limiting vibration and reducing excessive stress on the powertrain. Get the power down faster and make gearshifts that bit crisper with Powerflex. Weight: 830Fitting Instructions

Name: Lower Torque Mount - RoadProduct Notes: PFF60-8026 Lower Torque Mount featuresa CNC machined and laser-etched aluminium bracket, combining ourYellow 70A and Purple 80A durometermaterials for a sporty powertrain upgrade to standard or mildly tuned vehicles. Reducing engine/transmovement by way of an upgradedtorque mount has the following benefits:Sharper throttle responseMore accurate gear changesReduced wheel-hopImproved TractionMore balanced on/off throttle handlingThe two-part composite design of the larger bush improves the mount's durability in high-power applications, whilst still limiting vibration and reducing excessive stress on the powertrain. Get the power down faster and make gearshifts that bit crisper with Powerflex. Weight: 830Fitting Instructions

Name: Lower Torque Mount - Track/MsportProduct Notes: PFF60-8026BLK Lower Torque Mountusesa CNC machined and laser-etched aluminium bracket, with a two-part Black 95A durometer material, providing the stiffest link between engine and chassis, for hard track and motorsport use. Reducing engine/transmovement by way of an upgradedtorque mount has the following benefits:Sharper throttle responseMore accurate gear changesReduced wheel-hopImproved TractionMore balanced on/off throttle handlingThe two-part composite design of the larger bush improves the mount's durability in high-power applications, whilst still limiting vibration and reducing excessive stress on the powertrain. Get the power down faster and make gearshifts that bit crisper with Powerflex.Weight: 830Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97