Focus Mk2 inc ST and RS (2005-2010)

Name: Exhaust MountProduct Notes: Weight: 61Fitting Instructions

Name: Exhaust MountProduct Notes: This product may overheat if used too close to the catalyst. Please order the required amount for your vehicle, as some models will require more than others. Weight: 130

Name: Exhaust Mount - Cat SectionProduct Notes: Bush Size: A=64mm B=50mmWeight: 60Fitting Instructions

Name: Ford Focus MK2 ST 2005-2008Product Notes: Fits earlier ST models using the earlier lower engine mounting insert PFF19-1222 Included within this pack are the following parts:PFF19-8011Front Lower Wishbone Front Bush 14mm BoltPFF19-1202Front Lower Wishbone Rear BushPFF19-1221Lower Engine Mount Small BushPFF19-1222Lower Engine Mount InsertThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 1770

Name: Ford Focus MK2/3 ST (2008 on)Product Notes: For the ST models 2008- which use the later lower engine mount insert PFF19-1220 as fitted to the RS Included within this pack are the following parts: PFF19-8011Front Lower Wishbone Front Bush 14mm Bolt PFF19-1202Front Lower Wishbone Rear Bush PFF19-1220Lower Engine Mount Insert PFF19-1221Lower Engine Mount SmallWeight: 1770

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Please check bar diameter before ordering. Bush Size: 21mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 205

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 205

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Please check bar diameter before ordering. Bush Size: 21mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 199

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 199

Name: Front Anti Roll Bar To Chassis Bush 24mmProduct Notes: Bush Size: 24mmWeight: 190

Name: Front Anti Roll Bar To Chassis Bush 24mmProduct Notes: Bush Size: 24mmWeight: 190

Name: Front Lower Wishbone Rear BushProduct Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

Name: Front Lower Wishbone Rear Bush Product Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

Name: Front Subframe Front BushProduct Notes: PFF19-1218 Front Subframe Front Bush is machined using POM-H homopolymer acetal (Delrin) to provide minimal deflection and ultra-high wear resistance. It is recommended that PFF19-1219 Front Subframe Rear Bush is fitted at the same time. A small increase in NVH should be expected when stiffening the connecting mounts between the subframe and chassis. Weight: 564

Name: Front Subframe Front BushProduct Notes: PFF19-1218 Front Subframe Front Bush is machined using POM-H homopolymer acetal (Delrin) to provide minimal deflection and ultra-high wear resistance. It is recommended that PFF19-1219 Front Subframe Rear Bush is fitted at the same time. A small increase in NVH should be expected when stiffening the connecting mounts between the subframe and chassis. Weight: 564

Name: Front Subframe Rear BushProduct Notes: PFF19-1219 Front Subframe Rear Bush is made with a more traditional Black 95A durometer polyurethane to offer superior performance and durability over the OE rubber bush, providing a more positive steering feel. It is recommended that PFF19-1218 Front Subframe Front Bush is fitted at the same time. A small increase in NVH should be expected when stiffening the connecting mounts between the subframe and chassis. Weight: 847

Name: Front Subframe Rear BushProduct Notes: PFF19-1219 Front Subframe Rear Bush is made with a more traditional Black 95A durometer polyurethane to offer superior performance and durability over the OE rubber bush, providing a more positive steering feel. It is recommended that PFF19-1218 Front Subframe Front Bush is fitted at the same time. A small increase in NVH should be expected when stiffening the connecting mounts between the subframe and chassis. Weight: 847

Name: Front Upper Right Engine Mount InsertProduct Notes: This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 320Fitting Instructions

Name: Front Upper Right Engine Mount InsertProduct Notes: This part fits as an insert for the Front Upper Right Engine Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 320Fitting Instructions

Name: Front Wishbone Front Bush 12mm boltProduct Notes: Fits bushes with a 12mm bore sleeve. For bushes with a 14mm bore sleeve, please use PFF19-8011 as fitted to the Focus RS/ST etc. Weight: 572

Name: Front Wishbone Front Bush 12mm boltProduct Notes: Fits bushes with a 12mm bore sleeve. For bushes with a 14mm bore sleeve, please use PFF19-8011 as fitted to the Focus RS/ST etc. Weight: 572

Name: Front Wishbone Front Bush 14mm boltProduct Notes: PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801. Bush Size: 14mm boltWeight: 535

Name: Front Wishbone Front Bush 14mm boltProduct Notes: PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801. Bush Size: 14mm boltWeight: 535

Name: Front Wishbone Front Bush Camber Adjustable 14mm BoltProduct Notes: 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt. Bush Size: 14mmWeight: 764Fitting Instructions

Name: Front Wishbone Front Bush Camber Adjustable 14mm BoltProduct Notes: 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt. Bush Size: 14mmWeight: 764Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1002G adds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1002Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1002G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Black Shore 80A Black Series material, PFF19-1002G is 85% stiffer than the original rubber bush for those looking for a Track/Competition option, whilst our Purple Shore 95A Road Series material is 10% stiffer than the original bush. Weight: 2580Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1002G adds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1002Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1002G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Purple Shore 80A Road Series material, PFF19-1002G is 10% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 85% stiffer than the original for those looking for a Track/Competition option. Weight: 2580Fitting Instructions

Name: Gearbox Mount Insert Product Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 254Fitting Instructions

Name: Gearbox Mount InsertProduct Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 254Fitting Instructions

Name: Jack Pad Adaptor Product Notes: PF19-860 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Ford C-Max MK1 (2003-2010),Ford C-Max MK2 (2011 ON),Ford Fiesta Mk7 (2008 - 2017),Ford Fiesta Mk7 ST (2013 - 2017),Ford Fiesta Mk6 inc ST (2002-2008),Ford Focus Mk1, Ford Focus Mk1 RS,Ford Focus Mk1 ST, Ford Focus MK2,Ford Focus MK2 RS, Ford Focus MK2 ST,Ford Focus Mk3, Ford Focus MK3 RS,Ford Focus Mk3 ST,Mazda Mazda 3 BK (2004-2009),Mazda Mazda 3 BL (2009-2013) Bush Size: 75mm DiameterWeight: 126