997 GT2, GT3 & GT3RS (2006-2013)

Name: Bolt-On Jack Pad Adaptor KitProduct Notes: PF57-561K Bolt-On Jack Pad Adaptor Kit is a kit of four anodised CNC-machined 6082-grade aluminium Jack Pads with a 95A durometer anti-slip base that fit into the four underbody lifting points on most modern Porsche vehicles including the classic 911. They are designed to help lift stability and location whilst protecting the underside of your vehicle from damage. To fit, locate the Jack Pad into the elongated factory lifting point, turn through 90 degrees and lock down securely using the plated Allen bolt with a standard 5mm Allen key. It's as simple as that! Bush Size: 70mmWeight: 881

Name: Engine Intake Sleeve KitProduct Notes: Supplied as an engine set of 6, our new PFR57-526K Engine Intake Sleeve Kit is made in our Dark Grey 80A polyurethane material for an OE aesthetic with increased durability and reliability over the equivalent rubber items which from what we have been told, are no longer available from Porsche! Each sleeve is designed and engineered to seal and link both sides of the intake system, with the supplied high-quality, stainless-steel hose clamps ensuring a tight fit and consistent engine vacuum, making them a must-have for any engine build. Please note, this kit fits 996 GT3 & 997 GT3 models only. Weight: 1

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Fits 987.2 and 997.2 with the optional Porsche Active Suspension Management (PASM). Bush Size: 25mmWeight: 80

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Fits 987.2 and 997.2 with the optional Porsche Active Suspension Management (PASM). Bush Size: 25mmWeight: 80

Name: Front Track Control Arm Caster Offset Outer BushProduct Notes: PFF57-502G uses a Purple 80A durometer bush and an offset bore sleeve to allow up to 0.4deg of caster increase from OE. This allows for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain. It fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only. All other 997 models use PFF57-802G. Weight: 393Fitting Instructions

Name: Front Track Control Arm Caster Offset Outer BushProduct Notes: PFF57-502GBLK uses a Black 95A 80A durometer bush and an offset bore sleeve to allow up to 0.4deg of caster increase from OE. This allows for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain. It fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only. All other 997 models use PFF57-802GBLK. Weight: 393Fitting Instructions

Name: Front Track Control Arm Inner Bush, Camber AdjustableProduct Notes: PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75. For non-adjustable TCA bushes on 996 and 997 models use PFF57-503. Weight: 920Fitting Instructions

Name: Front Track Control Arm Inner Bush, Camber AdjustableProduct Notes: PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75. For non-adjustable TCA bushes on 996 and 997 models use PFF57-503. Weight: 920Fitting Instructions

Name: Gearbox Front Mounting Bush Insert KitProduct Notes: Fits 996 & 997 vehicles with the twin bush mounting bracket, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush in the end casing use PFR57-530BLK. This will not fit the original 99637503303 transmission carrier. This part fits the following vehicles:Porsche 996 (1999-2005)Porsche 996 Carrera 4 (2002-04)Porsche 996 Carrera and Carrera 4S (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Note: Automatic TransmissionPorsche 996 GT2 and GT3 Coupe (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Manual TransmissionPorsche 997 (2005-2013)Porsche 997 Carrera 4 and Carrera 4S (2006-08)Porsche 997 Carrera and Carrera S (2005-08)Porsche 997 Targa 4 and Targa 4S (2007-08)Porsche 997 Turbo (2007-09) Note: Automatic TransmissionPorsche 997 GT3 RS 4.0 Coupe (2011)Porsche 997 GT3 and GT3 RS Coupe (2007-11)Porsche 997 Turbo (2007-13) Manual Transmission Weight: 160

Name: Gearbox Front Mounting Bush Insert KitProduct Notes: Fits 996 & 997 vehicles with the twin bush mounting bracket, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush in the end casing use PFR57-530. This will not fit the original 99637503303 transmission carrier. This part fits the following vehicles:Porsche 996 (1999-2005)Porsche 996 Carrera 4 (2002-04)Porsche 996 Carrera and Carrera 4S (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Note: Automatic TransmissionPorsche 996 GT2 and GT3 Coupe (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Manual TransmissionPorsche 997 (2005-2013)Porsche 997 Carrera 4 and Carrera 4S (2006-08)Porsche 997 Carrera and Carrera S (2005-08)Porsche 997 Targa 4 and Targa 4S (2007-08)Porsche 997 Turbo (2007-09) Note: Automatic TransmissionPorsche 997 GT3 RS 4.0 Coupe (2011)Porsche 997 GT3 and GT3 RS Coupe (2007-11)Porsche 997 Turbo (2007-13) Manual Transmission Weight: 160

Name: Jack Pad AdaptorProduct Notes: PF57-560 is a CNC aluminium jack pad that fits into the elongated lifting point on most modern Porsche vehicles, with a simple twist and lock action to locate securely. It is designed to help lift stability and location, whilst protecting the underside of your vehicle using high-strength 95A durometer polyurethane lifting pads, making this a must-have for Porsche owners and specialists alike. Bush Size: 73mmWeight: 309Fitting Instructions

Name: Rear Link Arm Inner BushProduct Notes: Weight: 408

Name: Rear Link Arm Inner BushProduct Notes: Weight: 408

Name: Rear Top Mount Isolator BushProduct Notes: PFR57-830BLK Rear Top Mount Isolator Bush isa direct replacement for the OE foam isolator, meaning that you no longer have to buy an expensive complete mount and can just replace the problematic part. It offers increased durability and performance while providing a cost-effective, fit-and-forget solution that's a worthwhile upgrade as part of any rear suspension overhaul. Weight: 118Fitting Instructions

Name: Rear Top Mount Isolator BushProduct Notes: PFR57-830 Rear Top Mount Isolator Bush isa direct replacement for the OE foam isolator, meaning that you no longer have to buy an expensive complete mount and can just replace the problematic part. It offers increased durability and performance while providing a cost-effective, fit-and-forget solution that's a worthwhile upgrade as part of any rear suspension overhaul. Weight: 118Fitting Instructions

Name: Rear Track Control Arm Inner BushProduct Notes: No adjustment, concentric. Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C. Weight: 475

Name: Rear Track Control Arm Inner BushProduct Notes: No adjustment, concentric. Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C. Weight: 475

Name: Rear Track Control Arm Outer BushProduct Notes: Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C. Weight: 391Fitting Instructions

Name: Rear Track Control Arm Outer BushProduct Notes: Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C. Weight: 391Fitting Instructions

Name: Rear Upper Link Arm Inner Bush Product Notes: PFR57-1509 fits 19.5mm width arms, for 22mm width arms please use PFR57-509. Bush Size: 19.5mmWeight: 510Fitting Instructions

Name: Rear Upper Link Arm Inner Bush Product Notes: PFR57-1509 fits 19.5mm width arms, for 22mm width arms please use PFR57-509. Bush Size: 19.5mmWeight: 510Fitting Instructions

Name: Rear Upper Link Arm Inner BushProduct Notes: Weight: 510

Name: Rear Upper Link Arm Outer Bush 2006 onProduct Notes: On some early 997 models (pre-2006) there is no support on the outside face of the link arm to hub bush. For these models use 4 x PFR57-508 for the link arm to hub bushes & 4 x PFR57-509 for the link arm to subframe bush. For hub carriers with support either side of the bush, use 8 x PFR57-509. Weight: 510

Name: Track Control Arm & Bush KitProduct Notes: We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product explicitly designed for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty. Weight: 3509Fitting Instructions

Name: Track Control Arm & Bush KitProduct Notes: We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product explicitly designed for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty. Weight: 3509Fitting Instructions

Name: Track Control Arm & Bush Kit (Adjustable)Product Notes: We can now supply a high-quality cast control arm pre-assembled with our signature polyurethane bushes for a fit-and-forget product designed specifically for high performance and convenience of use, saving both time and money with the added peace of mind of our Lifetime Warranty. This arm features suspension geometry tuning, with a caster increase of up to 0.4 and camber adjustment of +/- 0.75 Weight: 3914Fitting Instructions