Micra

Name: Front Anti Roll Bar Bush 20.5mmProduct Notes: This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PFF60-503-*. Bush Size: 20.5mmWeight: 119

Name: Front Anti Roll Bar Bush 20.5mmProduct Notes: This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PFF60-503-*. Bush Size: 20.5mmWeight: 119

Name: Front Arm Front BushProduct Notes: Weight: 250

Name: Front Arm Front BushProduct Notes: Weight: 250

Name: Front Arm Rear BushProduct Notes: Weight: 781Fitting Instructions

Name: Front Arm Rear BushProduct Notes: Weight: 781Fitting Instructions

Name: Front Arm Rear Bush Caster OffsetProduct Notes: PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902. Weight: 781Fitting Instructions

Name: Front Arm Rear Bush Caster Offset Product Notes: PFF60-902G provides a fixed 4mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-offset version of this bush please use PFF60-902. Weight: 781Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF46-1002 is a 3-pc design allowing for increased articulation of the front wishbone. For a caster offset version of this bush please use PFF46-1002G. Weight: 816Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: PFF46-1002 is a 3-pc design allowing for increased articulation of the front wishbone. For a caster offset version of this bush please use PFF46-1002G. Weight: 816Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF46-1002G is a 3-pc design allowing for increased articulation of the front wishbone and provides +/- 0.5 caster offset . For a non-offset version of this bush please use PFF46-1002. Weight: 816Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF46-1002G is a 3-pc design allowing for increased articulation of the front wishbone and provides +/- 0.5 caster offset . For a non-offset version of this bush please use PFF46-1002. Weight: 816Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 122Fitting Instructions

Name: Gearbox Mounting Bush InsertProduct Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 122Fitting Instructions

Name: Lower Engine Mount Bush Insert Product Notes: Weight: 133

Name: Lower Engine Mount Bush Insert Product Notes: Weight: 133

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam Mounting BushProduct Notes: Weight: 932Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 932Fitting Instructions

Name: Universal Exhaust MountProduct Notes: Weight: 69Fitting Instructions