Discovery 1 (1989-1998)

Name: A Frame to Chassis Bush Product Notes: For pre-2010 Vehicles with 3/4 bolts PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel.A short video to help as a guide to remove bushes such as these can be found by clicking here. "Bush Size: 19mmWeight: 340

Name: A Frame to Chassis Bush Product Notes: For pre-2010 Vehicles with 3/4 bolts PFR32-110 is made using our most rigid Black 95A material to replicate the stiffness of the original rubber part in our non-perishable material. This specially designed part is shaped to allow a controlled amount of articulation as the A frame moves through its travel."Bush Size: 19mmWeight: 340

Name: Anti Roll Bar Drop Link BushProduct Notes: This part is designed to fit front or rear positions of the anti roll bar link. Weight: 111

Name: Anti Roll Bar Drop Link BushProduct Notes: This part is designed to fit front or rear positions of the anti roll bar link. Weight: 111Fitting Instructions

Name: Exhaust MountProduct Notes: Weight: 107Fitting Instructions

Name: Exhaust MountProduct Notes: Bush Size: B=48mmWeight: 68Fitting Instructions

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 247

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 247

Name: Front Anti Roll Bar Bush 28mmProduct Notes: This part fits vehicles with aftermarket anti roll bars measuring 28mm diameter. Please check anti roll bar diameter before ordering. Bush Size: 28mmWeight: 261

Name: Front Anti Roll Bar Bush 28mmProduct Notes: This part fits vehicles with aftermarket anti roll bars measuring 28mm diameter. Please check anti roll bar diameter before ordering. Bush Size: 28mmWeight: 261

Name: Front Bump Stop Extended - 80mmProduct Notes: This part is designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively. Bush Size: 80mm TallWeight: 1385

Name: Front Bump Stop Extended - 80mmProduct Notes: This part is designed to fit vehicles with raised suspension. For standard and lowered versions please use PF32-130-60 and PF32-130-40 respectively. Bush Size: 80mm TallWeight: 1385

Name: Front Bump Stop Lowered - 40mmProduct Notes: This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively. Bush Size: 40mm TallWeight: 979

Name: Front Bump Stop Standard - 60mmProduct Notes: This part is designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively. Bush Size: 60mm TallWeight: 1191

Name: Front Bump Stop Standard - 60mmProduct Notes: This part is designed to fit vehicles with standard height suspension. For extended versions for raised vehicles, please use PF32-130-80 and for lowered vehicles please use PF32-130-40 respectively. Bush Size: 60mm TallWeight: 1191

Name: Front Radius Arm Front BushProduct Notes: This part suits vehicles with the wider 44mm radius arms. For vehicles with 38mm radius arms please use PFF32-107. PFF32-108 uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting. A short video to help as a guide to remove bushes such as these can be found by clickinghere. Bush Size: 44mmWeight: 800

Name: Front Radius Arm Front Bush Caster Offset - 25mm LiftProduct Notes: PFF32-108G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 25mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steeringThe kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry.PFF32-108G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere. Weight: 1430Fitting Instructions

Name: Front Radius Arm Front Bush Caster Offset - 50mm LiftProduct Notes: PFF32-108G-50 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 50mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater stabilityImproved handling and tyre gripMore weight and detail to steeringThe kit includes robust CNC machined steel shells to prevent rotation and to retain the corrected geometry.PFF32-108G uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two halves for ease of fitting.A short video to help as a guide to remove bushes such as these can be found by clickinghere. Weight: 1430Fitting Instructions

Name: Front Radius Arm Rear Bush Product Notes: PFF32-109 replicates original steering geometry.Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.To counter pull to the left or right, please use PFF32-109G05 for 0.5 degrees offset or PFF32-109G1 for 1 degree offset. Weight: 503Fitting Instructions

Name: Front Radius Arm Rear Bush Product Notes: Weight: 503

Name: Front Radius Arm Rear Bush - Anti Pull Product Notes: PFF32-109G is designed to counter pull to the left or right by correcting the steering using our offset bushes. The kit includes parts to correct steering geometry by 0.5 and 1 degrees. The kit includes replacement washers and Nyloc nuts for a clean installation and an accurate torque setting.Made from our Yellow 70A material, this part allows the required articulation that this bush location demands. Weight: 717Fitting Instructions

Name: Front Radius Arm Rear Bush - Anti Pull Product Notes: PFF32-109G is designed to counter pull to the left or right by correcting the steering using our offset bushes. The kit includes parts to correct steering geometry by 0.5 and 1 degrees. The kit includes replacement washers and Nyloc nuts for a clean installation and an accurate torque setting. Made from our Yellow 70A material, this part allows the required articulation that this bush location demands. Weight: 717

Name: Panhard Rod Bush 30mmProduct Notes: This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301. Bush Size: 30mm ODWeight: 163

Name: Panhard Rod Bush 30mmProduct Notes: This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301. Bush Size: 30mm ODWeight: 163

Name: Powerflex Handling Pack Product Notes: Included within this pack are the following parts:PFF32-101Panhard Rod Bush 30mmPFF32-108Front Radius Arm Front BushPFF32-109Front Radius Arm Rear BushPFR32-110A-Frame to Chassis BushPFR32-111Rear Radius Arm Front BushPFR32-112Rear Trailing Arm to Axle BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 4010

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90, 110, 120, except 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 271

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Fits 90, 110, 120, except 90 V8 Efi & Td5. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 271

Name: Rear Bump Stop Lowered - 40mmProduct Notes: This part is designed to fit vehicles with lowered suspension. For standard height and extended versions, please use PF32-130-60 and PF32-130-80 respectively. Bush Size: 40mm TallWeight: 979

Name: Rear Radius Arm Front BushProduct Notes: During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel.PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity. Weight: 2082Fitting Instructions

Name: Rear Radius Arm Front Bush Product Notes: During testing of the original rubber bushes, it was discovered that the resting position of the vehicle forces the bush into a stressed angle that leads to premature failure and uneven spring rate characteristics through the suspension travel.PFR32-111 has been engineered to align the radius arm with a 3.5 degrees static angle of the radius arm to allow neutral articulation for improved performance and longevity.Weight: 2082Fitting Instructions

Name: Rear Shock Absorber Upper BushProduct Notes: PFR32-133 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes. Weight: 276

Name: Rear Shock Absorber Upper BushProduct Notes: PFR32-133 is designed to accommodate the natural arc of the shock absorber through the use of our Yellow 70A material, that when combined with voiding will allow controlled articulation. This serves to reduce the transmission of vibration and will mean a smoother ride for your vehicle and provide you with long lasting bushes. Weight: 276