C-Max Models

Name: Exhaust MountProduct Notes: This product may overheat if used too close to the catalyst. Please order the required amount for your vehicle, as some models will require more than others. Weight: 130

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Please check bar diameter before ordering. Bush Size: 21mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Please check bar diameter before ordering. Bush Size: 22mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 23mmProduct Notes: Please check bar diameter before ordering. Bush Size: 23mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 24mmProduct Notes: Please check bar diameter before ordering. Bush Size: 24mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 25.5mmProduct Notes: Please check bar diameter before ordering. Bush Size: 25.5mmWeight: 181

Name: Front Lower Wishbone Rear Bush Product Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: PFF19-1202 will not fit models using aluminium front wishbones. Weight: 694Fitting Instructions

Name: Front Wishbone Front Bush 14mm boltProduct Notes: PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801. Bush Size: 14mm boltWeight: 535

Name: Front Wishbone Front Bush 14mm boltProduct Notes: PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801. Bush Size: 14mm boltWeight: 535

Name: Front Wishbone Front Bush Camber Adjustable 14mm BoltProduct Notes: 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt. Bush Size: 14mmWeight: 764Fitting Instructions

Name: Front Wishbone Front Bush Camber Adjustable 14mm BoltProduct Notes: 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt. Bush Size: 14mmWeight: 764Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1802G is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1802Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1802G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Purple Shore 80A Road Series material, PFF19-1802G is 10% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 85% stiffer than the original for those looking for a Track/Competition option. Weight: 3464Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1002G adds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1002Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1002G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Black Shore 80A Black Series material, PFF19-1002G is 85% stiffer than the original rubber bush for those looking for a Track/Competition option, whilst our Purple Shore 95A Road Series material is 10% stiffer than the original bush. Weight: 2580Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1002G adds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1002Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1002G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Purple Shore 80A Road Series material, PFF19-1002G is 10% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 85% stiffer than the original for those looking for a Track/Competition option. Weight: 2580Fitting Instructions

Name: Jack Pad Adaptor Product Notes: PF19-860 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles:Ford C-Max MK1 (2003-2010),Ford C-Max MK2 (2011 ON),Ford Fiesta Mk7 (2008 - 2017),Ford Fiesta Mk7 ST (2013 - 2017),Ford Fiesta Mk6 inc ST (2002-2008),Ford Focus Mk1, Ford Focus Mk1 RS,Ford Focus Mk1 ST, Ford Focus MK2,Ford Focus MK2 RS, Ford Focus MK2 ST,Ford Focus Mk3, Ford Focus MK3 RS,Ford Focus Mk3 ST,Mazda Mazda 3 BK (2004-2009),Mazda Mazda 3 BL (2009-2013) Bush Size: 75mm DiameterWeight: 126

Name: Lower Torque Mount Bracket & Bush, Fast Road Product Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-1822 Lower Engine Mount Bracket & Bushes (Yellow 70A) is 50% stiffer than the OE mount and recommended for fast road use for standard or mildly tuned cars. Weight: 873Fitting Instructions

Name: Lower Torque Mount Bracket & Bush, Fast Road/TrackProduct Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-1822P Lower Engine Mount Bracket & Bushes (Purple 80A) is 100% stiffer than OE and recommended for higher powered cars used on the road/track. Weight: 873Fitting Instructions

Name: Lower Torque Mount Bracket & Bush, Track UseProduct Notes: Combining a new CNC machined aluminium lower torque mount with various durometer options to suit differing states of tune, this is a great way to reduce the amount of engine movement during hard acceleration and gear changing. It's also super easy to replace - just two bolts and it's out with the old, in with the new and no pressing out of any rubber! PFF19-1822BLK Lower Engine Mount Bracket & Bushes (Black 95A) is a huge 300% stiffer than OE and available in our Black Series for hard Track and Motorsport use. Weight: 873Fitting Instructions

Name: Rear Anti Roll Bar To Chassis Bush 18mmProduct Notes: Bush Size: 18mmWeight: 205

Name: Rear Lower Control Arm BushProduct Notes: Weight: 510Fitting Instructions

Name: Rear Lower Track Control Arm Inner BushProduct Notes: Fits the following Rear Track Control Arms - Finis Code 1061666, 1064128,1150353, 1357319, 1548460, 1909108, 1743600, 1894048, 1894049, 1931272, 1931562, 1948762, 1949978 - Part number 98AG-5K652-BG, 98AG-5K652-AK, 1M5O-5K652-AA, 4M51-5K652-BD, 4M51-5K652-CB, 4M51-5K652-AF, BV61-5K652-GA, BV61-5K652-CH, BV61-5K652-AH, F1F1-5K652-AA, BV61-5K652-FF, BV61-5K652-EH, F1F1-5K652-CA, 1939321 Weight: 445Fitting Instructions

Name: Rear Trailing Arm Blade BushProduct Notes: PFR19-812 provides stability to the rear trailing arm whilst allowing the knurled pattern bush to freely rotate in the supplied outer shell. Weight: 1012Fitting Instructions

Name: Rear Upper Control Arm BushProduct Notes: Weight: 591Fitting Instructions

Name: Rear Upper Control Arm BushProduct Notes: Weight: 591Fitting Instructions

Name: Rear Upper Control Arm Camber Adjustable BushProduct Notes: PFF19-810G is an adjustable version of our popular PFR19-810 bush and is designed to provide +/- 1 degree of on-car camber adjustment. Weight: 710Fitting Instructions

Name: Rear Upper Control Arm Camber Adjustable Bush Product Notes: PFF19-810G is an on-car adjustable version of our popular PFR19-810 bush and is designed to provide +/- 1 degree of camber adjustment. Weight: 710Fitting Instructions