Lupo (1999 - 2006)

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar. Bush Size: 18mmWeight: 63

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar. Bush Size: 18mmWeight: 63

Name: Front Anti Roll Bar Bush 20mmProduct Notes: Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar. Bush Size: 20mmWeight: 61

Name: Front Anti Roll Bar Bush 20mmProduct Notes: Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar. Bush Size: 20mmWeight: 61

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar. Bush Size: 22mmWeight: 57

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar. Bush Size: 22mmWeight: 57

Name: Front Anti Roll Bar Eye Bolt Bush 18mmProduct Notes: Not suitable for VR6 models Bush Size: 18mmWeight: 62

Name: Front Anti Roll Bar Eye Bolt Bush 18mmProduct Notes: Not suitable for VR6 models Bush Size: 18mmWeight: 62

Name: Front Anti Roll Bar Eye Bolt Bush 20mmProduct Notes: Not suitable for VR6 models Bush Size: 20mmWeight: 61

Name: Front Anti Roll Bar Eye Bolt Bush 20mmProduct Notes: Not suitable for VR6 models Bush Size: 20mmWeight: 61

Name: Front Anti Roll Bar Eye Bolt Bush 20mmProduct Notes: Not suitable for VR6 models Bush Size: 20mmWeight: 61

Name: Front Eye Bolt Mounting Bush 10mmProduct Notes: Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models. Bush Size: 10mmWeight: 144

Name: Front Eye Bolt Mounting Bush 10mmProduct Notes: Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models. Bush Size: 10mmWeight: 144

Name: Front Eye Bolt Mounting Bush 10mmProduct Notes: Fits drop links with a 10mm diameter shaft. For 12mm shafts use PFF85-208. Does not fit Corrado & Vento VR6 models. Bush Size: 10mmWeight: 144

Name: Front Wishbone Inner Bush (front)Product Notes: Weight: 157

Name: Front Wishbone Inner Bush (front)Product Notes: Weight: 157

Name: Front Wishbone Inner Bush (rear)Product Notes: Weight: 618Fitting Instructions

Name: Front Wishbone Inner Bush (rear)Product Notes: Weight: 618Fitting Instructions

Name: Lower Engine Mount Large BushProduct Notes: Does not fit models with engine codes AMF 1.4 diesel engine or ANY & AYZ 3L TDI engines Weight: 318

Name: Lower Engine Mount Large BushProduct Notes: Does not fit models with engine codes AMF 1.4 diesel engine or ANY & AYZ 3L TDI engines Weight: 318

Name: Lower Engine Mount Large Bush - Fast Road Product Notes: Fits Lupo GTi only, engine code AVY. Weight: 570Fitting Instructions

Name: Lower Engine Mount Large Bush - Fast Road/TrackProduct Notes: Fits Lupo GTi only, engine code AVY. Weight: 570Fitting Instructions

Name: Lower Engine Mount Large Bush - MotorsportProduct Notes: Fits Lupo GTi only, engine code AVY. Weight: 570Fitting Instructions

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam Mounting BushProduct Notes: Bush Size: 58mmWeight: 588Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 588Fitting Instructions