X3 Series

Name: Adjustable Rear Lower Control Arm KitProduct Notes: This adjustable lower arm and bush combination provides +1.0 to -3.0 of on-car rear camber adjustment, useful to correct excessive camber issues on heavily lowered cars. The high-performance polyurethane bushes are suitable for road and track use without the comfort and longevity issues associated with spherical joints. For a replacement bush only to fit in the original arm, please use PFR5-4616. Weight: 3210Fitting Instructions

Name: Clutch Fork Pivot PinProduct Notes: The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. FF5-470 vs. Plastic BMW OEM Clutch Pivot PinPowerflex Stainless Steel Clutch Pin vs. worn-out factory Clutch Pivot Pin Weight: 59Fitting Instructions

Name: Engine Mount Insert KitProduct Notes: PFF5-4020 and PFF5-4021 Engine Mount Insert Kits are an intermediate alternative to the BMW aluminium inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in our Yellow 70A durometer material, they are designed to fit the voiding of the OE mounts snuggly to restrict engine movement with a minimal increase in NVH, perfect for those with tuned road cars. Their design and flexibility also mean they can be fitted to the vehicle without removing the engine mounts themselves. Reducing engine/transmission movement by way of upgraded inserts has the following benefits: - Sharper throttle response - Improved gear shifting - More direct power transfer - More balanced on/off throttle handling - Prolonged life of the OE mounts. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine and chassis. The harder the material used, the greater the NVH transmitted. Fits N52, N54, N55 and B58 engines only. Weight: 167Fitting Instructions

Name: Front Anti Roll Bar Mounting Bush 22.5mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 22.5mmWeight: 303

Name: Front Anti Roll Bar Mounting Bush 23.5mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23.5mmWeight: 303

Name: Front Control Arm To Chassis BushProduct Notes: PFF5-1902 is a reinforced replacement part that is 8% stiffer than the original bush to revitalise bush performance and restore steering precision. For a camber offset version of this bush please use PFF5-1902G. Weight: 552Fitting Instructions

Name: Front Control Arm to Chassis Bush - Camber Adjustable Product Notes: PFF5-1902G is a reinforced replacement bush that is 8% stiffer than the original bush to revitalise bush performance and restore steering precision and provides +/- 0.5 camber adjustment that can be adjusted on the car. For a non adjustable version of this part please use PFF5-1902. Weight: 567Fitting Instructions

Name: Front Lower Control Arm Inner BushProduct Notes: Weight: 538Fitting Instructions

Name: Front Lower Control Arm Inner BushProduct Notes: Weight: 538Fitting Instructions

Name: Front Lower Radius Arm To Chassis BushProduct Notes: Weight: 1054Fitting Instructions

Name: Front Radius Arm Bush Product Notes: PFF5-2601 Front Radius Arm Bush is made using our Black 95A durometer material and supplied with outer shells to increase stiffness by up to 300%, controlling longitudinal wheel movement under braking, cornering and improving longer-term durability. Note will not fit pre-supersession part numbers 31108854993 and 31108854994 . Weight: 1403Fitting Instructions

Name: Front Radius Arm To Chassis BushProduct Notes: Weight: 1627Fitting Instructions

Name: Jack Pad AdaptorProduct Notes: PF5-4660 is a polyurethane jack pad to fit into the plastic lifting points found on most modern BMW and related vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles: BMW 1 Series E81, E87, E88 (2004 - 2013) BMW 1 M E82 (2010 - 2012) BMW 1 Series F20, F21 (2011 - 2019) BMW 1 Series F40 (2018 on) BMW 1 Series F52 (2017 on) BMW 2 Series F22, F23 (2013 - 2020) BMW 2 Series Gran Coupe F44 (2019 on) BMW 2 Series Active Tourer F45, F46 (2014 - 2019) BMW M2 F87 (2015 on) BMW 3 Series E46 (1999 - 2006) BMW 3 Series E90, E91, E92, E93 (2005 - 2013) BMW 3 Series F30, F31, F34 (2011 - 2018) BMW M3 F80 (2011 - 2018) BMW 3 Series G20, G21, G28 (2018 on) BMW M3 G80 (2018 on) BMW 4 Series F32, F33, F36 (2013 - 2021) BMW M4 F82, F83 (2013 - 2021) BMW 4 Series G22, G23 (2020 on) BMW M4 G82, G83 (2020 on) BMW 5 Series E39 (1996 - 2004) BMW 5 Series E60, E61 (2003 - 2010) BMW 5 Series Gran Turismo F07 (2009 - 2016) BMW 5 Series F10, F11 (2010 - 2016) BMW 5 Series G30, G31 (2016 on) BMW M5 F90 (2017 on) BMW 6 Series E63, E64 (2003 - 2010) BMW 6 Series F06, F12, F13 (2011 - 2018) BMW 6 Series Gran Turismo G32 (2017 on) BMW 7 Series E38 (1994 - 2002) BMW 7 Series E65, E66, E67 (2001 - 2008) BMW 7 Series F01, F02, F03, F04 (2007 - 2016) BMW 7 Series G11, G12 (2015 on) BMW M8 F91, F92, F93 (2019 on) BMW 8 Series G14, G15, G16 (2018 on) BMW X1 E84 (2008 - 2015) BMW X1 F48 (2016 on) BMW X2 F39 (2017 on) BMW X3 E83 (2003 - 2010) BMW X3 F25 (2009 - 2017) BMW X3 F97, G01 (2017 on) BMW iX3 G08 (2020 on) BMW X4 F26 (2013 - 2018) BMW X4 F98, G02 (2018 on) BMW X5 E53 (1999 - 2006) BMW X5 E70 (2006 - 2013) BMW X5 F15, F85 (2013 - 2019)BMW X5 F85 M (2013 - 1018) BMW X5 F95, G05 (2018 on) BMW X6 E71, E72 (2007 - 2014) BMW X6 F16, F86 (2015 - 2019) BMW X6 F96, G06 (2019 on) BMW X7 G07 (2018 on) BMW Z4 E85, E86 (2003 - 2009) BMW Z4 E89 (2009 - 2018) BMW Z4 G29 (2018 on) Mini Hatch R50, R53 (2000 - 2006) Mini Hatch R56 (2006 - 2013) Mini Hatch F55, F56 (2014 on) Mini Cabriolet R52 (2000 - 2006) Mini Cabriolet R57 (2006 - 2013) Mini Cabriolet F57 (2014 on) Mini Clubman R55 (207 - 2014) Mini Clubman F54 (2015 on) Mini Countryman F60 (2017 on) Mini Coupe R58 (2011 - 2015) Mini Roadster R59 (2012 - 2015) Rolls Royce Ghost RR4 (2008 - 2018) Rolls Royce Phantom RR1 (2003 - 2017) Rolls Royce Phantom RR11, RR12 (2017 on) Rolls Royce Wraith RR5 (2012 - 2018) Rolls Royce Dawn RR6 (2015 - 2018) Rolls Royce Cullinan RR31 (2017 on) Toyota Supra MK5 J29 (2019 on) Bush Size: 80mm DiameterWeight: 136

Name: Offset Lower Radiator Mount KitProduct Notes: Made in our Grey 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radiator, making them an easy swap out. Weight: 57Fitting Instructions

Name: Offset Lower Radiator Mount KitProduct Notes: Made in our Red 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radiator, making them an easy swap out. Weight: 57Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Anti Roll Bar Bush 17.5mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 17.5mmWeight: 202

Name: Rear Anti Roll Bar Bush 18.5mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 18.5mmWeight: 202

Name: Rear Diff Front BushProduct Notes: Weight: 378Fitting Instructions

Name: Rear Diff Rear BushProduct Notes: Weight: 595Fitting Instructions

Name: Rear Lower Wishbone Inner BushProduct Notes: This part replaces the bush in the original arm OE number: 33326770813 and 33326770824 respectively. To make adjustments to the vehicles camber angles for precision alignment, please use PFR5-4615G that replaces the original arm and bush. Weight: 450Fitting Instructions

Name: Rear Lower Wishbone Outer BushProduct Notes: Weight: 510

Name: Rear Subframe Front BushProduct Notes: Weight: 1287Fitting Instructions

Name: Rear Subframe Front Bush InsertProduct Notes: The inserts are an intermediate solution designed to restrict movement in the original rubber bushes by filling the voids. These are only recommended if you want to stiffen the standard bushes slightly and the original bushes are in good condition. Weight: 225Fitting Instructions

Name: Rear Subframe Rear BushProduct Notes: Weight: 1086Fitting Instructions

Name: Rear Subframe Rear Bush Product Notes: Weight: 1086 Fitting Instructions

Name: Rear Subframe Rear Bush InsertProduct Notes: The inserts are an intermediate solution designed to restrict movement in the original rubber bushes by filling the voids. These are only recommended if you want to stiffen the standard bushes slightly and the original bushes are in good condition. Weight: 201Fitting Instructions

Name: Rear Subframe Rear Bush InsertProduct Notes: The inserts are an intermediate solution designed to restrict movement in the original rubber bushes by filling the voids. These are only recommended if you want to stiffen the standard bushes slightly and the original bushes are in good condition. Weight: 201Fitting Instructions

Name: Rear Trailing Arm BushProduct Notes: PFR5-3608 uses our Black Series 95A material for ultimate chassis control and durability for the rear trailing arm bush, a common failure point on many BMW vehicles. Weight: 571

Name: Rear Upper Wishbone Inner BushProduct Notes: Weight: 442Fitting Instructions

Name: Shift Arm Front Bush OvalProduct Notes: PFF5-4633 replaces the soft OE rubber bush fitted at the end of the gear shifter arm, a part often overlooked when upgrading transmission components. Made in our Black 95A durometer material, it eliminates play in the shifter assembly to restore precision and provide a more direct feel to enjoy fast and smooth shifting through the gears. Size: 22.7mm W x 17.5mm H x 21mm L. Bush Size: 22.7 x 17.5 x 21mmWeight: 26

Name: Shift Arm Front Bush Ultra-OvalProduct Notes: PFF5-4634 Shift Arm Front Bush Ultra-Oval replaces the soft OE rubber bush fitted at the end of the gear shifter arm, a part often overlooked when upgrading transmission components. Made in our Black 95A durometer material, it eliminates play in the shifter assembly to restore precision and provide a more direct feel to enjoy fast and smooth shifting through the gears. Size: 26mm W x 17.5mm H x 21mm L. Bush Size: 26mm x 17.5mm x 21mmWeight: 39