XC60 (2009 - 2017)

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Please check bar diameter before ordering. Bush Size: 22mmWeight: 181

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Please check bar diameter before ordering. Bush Size: 22mmWeight: 181

Name: Front Arm Rear Bush Product Notes: Fits steel wishbones only. The original rubber bush fails due to material degradation leading to problems such as imprecise steering, braking instability, and uneven tyrewear. Our two-piece polyurethane bush, PFF19-1902 Front Arm Rear Bush, resolves this, improving steeringresponse, vehicle handling, and tyre longevity. Weight: 1291Fitting Instructions

Name: Front Arm Rear Bush Product Notes: Fits steel wishbones only. The original rubber bush fails due to material degradation leading to problems such as imprecise steering, braking instability, and uneven tyrewear. Our two-piece polyurethane bush, PFF19-1902 Front Arm Rear Bush, resolves this, improving steeringresponse, vehicle handling, and tyre longevity. Weight: 1291Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 215

Name: Lower Engine Mount InsertProduct Notes: PFF88-1130BLK Lower Engine Mount Insert is made using our Black 95A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models. Increased NVH will be experienced by fitting this part. Weight: 99Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: PFF88-1130 Lower Engine Mount Insert is made using our Yellow 70A durometer material and designed to fill the voiding of the original lower engine mount. By doing so, it stiffens the rubber mount reducing engine/trans movement during acceleration and smooths out gearshifts for an improved driving experience. Fits Volvo S60, V70, S80, XC60, XC70 with B6* 3.0/3.2 6Cyl engines, Ford Mondeo MK4 ST, S-Max ST with the 2.5 Duratec engine, Land Rover Discovery Sport 1 and Freelander 2 with 2.0L Turbo Petrol engines and Range Rover Evoque L538 2.0L Turbo Petrol models and 2.2L Diesel manual models. Weight: 99Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: This is a polyurethane insert to fit into and fill the voids in the original mount. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 215

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Anti Roll Bar To Link Rod Bush Product Notes: Weight: 87Fitting Instructions

Name: Rear Anti Roll Bar To Link Rod Bush Product Notes: Weight: 87Fitting Instructions

Name: Rear Anti-Roll Bar BushProduct Notes: Does not fit Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 20.3mmWeight: 158

Name: Rear Anti-Roll Bar BushProduct Notes: Does not fit Mondeo 2.5, 2.3, or diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 20.3mmWeight: 158

Name: Rear Anti-Roll Bar BushProduct Notes: Fits Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 21.3Weight: 158

Name: Rear Anti-Roll Bar BushProduct Notes: Fits Mondeo 2.5, 2.3, or Diesel models. Please check the anti-roll bar diameter size for correct product sizing. Bush Size: 21.3mmWeight: 158

Name: Rear Lower Arm Inner BushProduct Notes: Fits the Aluminium cast lower arm. For pressed steel lower arms use PFR19-1913. Weight: 481

Name: Rear Lower Arm Inner BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1913. Weight: 590Fitting Instructions

Name: Rear Lower Arm Inner BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1913. Weight: 590Fitting Instructions

Name: Rear Lower Arm Outer BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1914. Weight: 568Fitting Instructions

Name: Rear Lower Arm Outer BushProduct Notes: Fits pressed steel lower arms, for cast aluminium arms please use PFR88-1914. Weight: 568Fitting Instructions

Name: Rear Lower Arm Outer Bush Product Notes: Fits the Aluminium cast lower arm, fitted to 2012-on cars, for pressed steel lower arms use PFR19-1914. Weight: 545

Name: Rear Subframe BushProduct Notes: Weight: 2179Fitting Instructions

Name: Rear Subframe BushProduct Notes: Weight: 2179Fitting Instructions

Name: Rear Subframe Front Bush InsertsProduct Notes: These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert. Weight: 169Fitting Instructions

Name: Rear Subframe Front Bush InsertsProduct Notes: These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1920 Rear Subframe Front Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert. Weight: 169Fitting Instructions

Name: Rear Subframe Rear Bush InsertsProduct Notes: These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1921 Rear Subframe Rear Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert. Weight: 222Fitting Instructions

Name: Rear Subframe Rear Bush InsertsProduct Notes: These inserts fit into the voiding of the original bush. For a full replacement bush use PFR19-1922 PFR19-1921 Rear Subframe Rear Bush Inserts are an easy solutionto reducing excessive rear subframe movement. Both come supplied with a subframealignment insert. Weight: 222Fitting Instructions

Name: Rear Toe Link Arm Bush Product Notes: This part fits OEM part numbers 1426770, 31262930, 31262931. Weight: 752Fitting Instructions

Name: Rear Toe Link Arm Bush Product Notes: Weight: 752Fitting Instructions

Name: Rear Trailing Arm Bush Product Notes: PFR19-1917 Rear Trailing Arm Bush is a long-term solution to the commonly replaced original bush. Often split and torn, replacing the OE trailing arm bushes is labour-intensive and requires complex fitting tools, making it an expensive ordeal. Our bushes have been developed with dual material components and a moulded-in metal T-bracket making for a simpler fitment and cost-effective replacement. The left-hand bush on certain Volvo S60, S80, V60, V70, XC60, and XC70 models featuresa larger bracket with two additional threaded studs for anexhaust hanging bracket. The extra plate supplied retrofitsto our original bush, making fitment across all vehicles possible. Weight: 2740Fitting Instructions

Name: Rear Trailing Arm BushProduct Notes: PFR19-1917 Rear Trailing Arm Bush is a long-term solution to the commonly replaced original bush. Often split and torn, replacing the OE trailing arm bushes is labour-intensive and requires complex fitting tools, making it an expensive ordeal. Our bushes have been developed with dual material components and a moulded-in metal T-bracket making for a simpler fitment and cost-effective replacement. The left-hand bush on certain Volvo S60, S80, V60, V70, XC60, and XC70 models featuresa larger bracket with two additional threaded studs for anexhaust hanging bracket. The extra plate supplied retrofitsto our original bush, making fitment across all vehicles possible. Weight: 2740Fitting Instructions

Name: Rear Upper Arm BushProduct Notes: Weight: 701Fitting Instructions