Brera 939 (2005-2010)

Name: Anti-Roll Bar Lateral Support Clamps 21-22mmProduct Notes: Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Bush Size: 21-22mmWeight: 0Fitting Instructions

Name: Anti-Roll Bar Lateral Support Clamps 23-24mmProduct Notes: Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Bush Size: 23-24mmWeight: 84Fitting Instructions

Name: Front Anti Roll Bar Bush 22mmProduct Notes: This parts fits non-Ti vehicles with a 22mm diameter anti- roll bar. For Ti models please use PFF1-503-24BLK. Please check anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 140Fitting Instructions

Name: Front Anti Roll Bar Bush 22mmProduct Notes: This parts fits non-Ti vehicles with a 22mm diameter anti- roll bar. For Ti models please use PFF1-503-24. Please check anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 140Fitting Instructions

Name: Front Anti Roll Bar Bush 24mmProduct Notes: This parts fits Ti vehicles with a 24mm diameter anti-roll bar. For non-Ti models please use PFF1-503-22. Please check anti-roll bar diameter before ordering. Bush Size: 24mmWeight: 126Fitting Instructions

Name: Front Anti Roll Bar Bush 24mmProduct Notes: This parts fits Ti vehicles with a 24mm diameter anti-roll bar. For non-Ti models please use PFF1-503-22BLK. Please check anti-roll bar diameter before ordering. Bush Size: 24mmWeight: 126Fitting Instructions

Name: Front Lower Arm Rear BushProduct Notes: Fits models from around 2007 on with 54mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 54mmWeight: 877Fitting Instructions

Name: Front Lower Arm Rear BushProduct Notes: Fits models from around 2007 on with 54mm wide bracket.et. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 54mmWeight: 877Fitting Instructions

Name: Front Lower Arm Rear Bush 46mmProduct Notes: Fits early models up to around 2007 with a 46mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 46mmWeight: 872Fitting Instructions

Name: Front Lower Arm Rear Bush 46mmProduct Notes: Fits early models up to around 2007 with a 46mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide bracket. Bush Size: 46mmWeight: 872Fitting Instructions

Name: Front Upper Arm Front BushProduct Notes: For an adjustable version of this bush please use PFF1-505G. Weight: 303Fitting Instructions

Name: Front Upper Arm Front BushProduct Notes: For an adjustable version of this bush please use PFF1-505GBLK. Weight: 303Fitting Instructions

Name: Front Upper Arm Front Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-506G. For a non-adjustable version of this bush please use PFF1-505. Weight: 555Fitting Instructions

Name: Front Upper Arm Front Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-506GBLK. For a non-adjustable version of this bush please use PFF1-505BLK. Weight: 555Fitting Instructions

Name: Front Upper Arm Rear BushProduct Notes: For an adjustable version of this bush please use PFF1-506G. Weight: 287Fitting Instructions

Name: Front Upper Arm Rear BushProduct Notes: For an adjustable version of this bush please use PFF1-506GBLK. Weight: 287Fitting Instructions

Name: Front Upper Arm Rear Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-505GBLK. For a non-adjustable version of this bush please use PFF1-506. Weight: 565Fitting Instructions

Name: Front Upper Arm Rear Bush, AdjustableProduct Notes: On-car adjustable bush allowing changes to the camber and caster angles. The hole is offset by 7.5mm offering approx. +/- 1 of camber adjustment. Use in conjunction with PFF1-505GBLK. For a non-adjustable version of this bush please use PFF1-506BLK. Weight: 565Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Trailing Arm Front Outer BushProduct Notes: These bushes incorporate steel support washers that are designed to spread load across the arm and protect the bushes from sharp edges found on pressed steel arms. Weight: 895

Name: Rear Trailing Arm Front Outer BushProduct Notes: These bushes incorporate steel support washers that are designed to spread load across the arm and protect the bushes from sharp edges found on pressed steel arms. Weight: 895

Name: Rear Trailing Arm Rear Inner BushProduct Notes: Weight: 605

Name: Rear Trailing Arm Rear Inner BushProduct Notes: Weight: 605