Dedra inc Integrale (1989-1999)

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 21mmProduct Notes: Bush Size: 21mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 22mmProduct Notes: Bush Size: 22mmWeight: 115Fitting Instructions

Name: Front Anti Roll Bar To Chassis Bush 23mmProduct Notes: Bush Size: 23mmWeight: 121

Name: Front Anti Roll Bar To Chassis Bush 23mmProduct Notes: Bush Size: 23mmWeight: 121

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Front BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us by email with the dimensions required and we will send you a set of the correct sized sleeves free of charge. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 304Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: Front Lower Wishbone Rear BushProduct Notes: These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 also comes with different sized adaptor rings to suit different sized brackets. Use the smaller ring (1-802B) with the aluminium bracket and the larger ring (1-802C) with the pressed steel bracket. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM Weight: 653Fitting Instructions

Name: PowerAlign Camber Bolt Kit (10mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your toolkit so that you can make pit garage adjustments to your suspension using PowerAlignCamber Bolts? Bush Size: M10mm x 70mmWeight: 160Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Upper Engine Mount Bush Product Notes: Weight: 122