F10, F11 (2010 - 2017)

Name: Clutch Fork Pivot PinProduct Notes: The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. FF5-470 vs. Plastic BMW OEM Clutch Pivot PinPowerflex Stainless Steel Clutch Pin vs. worn-out factory Clutch Pivot Pin Weight: 59Fitting Instructions

Name: Front Anti-Roll Bar BushProduct Notes: Fits vehicles without Dynamic Drive or Adaptive Drive Bush Size: 28.2Weight: 247

Name: Front Anti-Roll Bar BushProduct Notes: Fits vehicles without Dynamic Drive or Adaptive Drive Bush Size: 28.2Weight: 247

Name: Front Control Arm To Chassis BushProduct Notes: Weight: 1318Fitting Instructions

Name: Front Control Arm To Chassis BushProduct Notes: Weight: 1318Fitting Instructions

Name: Front Lower Control Arm Inner BushProduct Notes: Made using our hardest Black 95A durometer material, PFF5-6102 is 15% stiffer than a new OE rubber equivalent and significantly stiffer than an older, worn rubber bush helping to sharpen steering response, improve braking stability and prolong tyre life. It provides the perfect accompaniment for PFF5-6101 Front Radius Arm to Chassis Bush for xDrive Vehicles Weight: 1100Fitting Instructions

Name: Front Lower Control Arm Inner BushProduct Notes: Made using our hardest Black 95A durometer material, PFF5-6102 is 15% stiffer than a new OE rubber equivalent and significantly stiffer than an older, worn rubber bush helping to sharpen steering response, improve braking stability and prolong tyre life. It provides the perfect accompaniment for PFF5-6101 Front Radius Arm to Chassis Bush for xDrive Vehicles Weight: 1100Fitting Instructions

Name: Front Radius Arm to Chassis Bush Product Notes: This is a replacement part to replicate the geometry of the original part. For a caster offset version please use PFF5-6001GBLK. Weight: 1674Fitting Instructions

Name: Front Radius Arm to Chassis Bush Product Notes: This is a replacement part to replicate the geometry of the original part. For a caster adjustable version please use PFF5-6001G. Weight: 1674Fitting Instructions

Name: Front Radius Arm to Chassis Bush Product Notes: This is a replacement part to replicate the geometry of the original part. For a caster adjustable version please use PFF5-6201G. Weight: 1111Fitting Instructions

Name: Front Radius Arm to Chassis Bush Product Notes: This is a replacement part to replicate the geometry of the original part For a caster adjustable version please use PFF5-6201GBLK. Weight: 1111Fitting Instructions

Name: Front Radius Arm to Chassis Bush Product Notes: This is a replacement part to replicate the geometry of the original part. For a caster offset version please use PFF5-6101G. Weight: 858Fitting Instructions

Name: Front Radius Arm to Chassis Bush Product Notes: This is a replacement part to replicate the geometry of the original part. For a caster offset version please use PFF5-6101GBLK. Weight: 858Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Adjustable Product Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. PFF5-6201G provides 6mm offset to provide +/- 0.5 caster adjustability for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6201. Weight: 1857Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Adjustable Product Notes: PFF5-6001G provides +/- 0.5 caster adjustability for In-corner camber gain, Sharper steering turn-in and Greater steering feedback. For a non-adjustable version of this bush please use PFF5-6001. Weight: 1809Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster AdjustableProduct Notes: PFF5-6001G provides +/- 0.5 caster adjustability for In-corner camber gain, Sharper steering turn-in and Greater steering feedback. For a non-adjustable version of this bush please use PFF5-6001. Weight: 1809Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This is a replacement part that uses our Black Series material to boost stiffness over the original part by 18% to withstand increased loading seen by this position on the car. PFF5-6201G provides 6mm offset to provide +/- 0.5 caster adjustability for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6201. Weight: 1857Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Offset Product Notes: PFF5-6101G provides a fixed 6mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6101. Weight: 858Fitting Instructions

Name: Front Radius Arm to Chassis Bush Caster Offset Product Notes: PFF5-6101G provides a fixed 6mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF5-6101. Weight: 858Fitting Instructions

Name: Front Upper Wishbone Bush Product Notes: Weight: 765Fitting Instructions

Name: Front Upper Wishbone Bush Product Notes: Weight: 765Fitting Instructions

Name: Front Upper Wishbone Bush Camber AdjustableProduct Notes: PFF5-6004G is a replacement bush that is 66% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF5-6004. Weight: 1041Fitting Instructions

Name: Front Upper Wishbone Bush Camber AdjustableProduct Notes: PFF5-6004G is a replacement bush that is 66% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF5-6004. Weight: 1041

Name: Gear Shift Arm Front Bush OvalProduct Notes: Depending on vehicle application, this part can be 1 or 2 per car. Size 22mm W x 17mm H x 26mm L. Bush Size: 22mm x 17mm x 26mmWeight: 26

Name: Gear Shift Arm Front Bush OvalProduct Notes: Depending on vehicle application, this part can be 1 or 2 per car. Size 22mm W x 17mm H x 26mm L. Bush Size: 22mm x 17mm x 26mmWeight: 26

Name: Gear Shift Arm Front Bush RoundProduct Notes: Bush Size: 26mm LongWeight: 26

Name: Gear Shift Arm Front Bush Round Product Notes: Bush Size: 26mm LongWeight: 26

Name: Jack Pad AdaptorProduct Notes: PF5-4660 is a polyurethane jack pad to fit into the plastic lifting points found on most modern BMW and related vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. Fits the following vehicles: BMW 1 Series E81, E87, E88 (2004 - 2013) BMW 1 M E82 (2010 - 2012) BMW 1 Series F20, F21 (2011 - 2019) BMW 1 Series F40 (2018 on) BMW 1 Series F52 (2017 on) BMW 2 Series F22, F23 (2013 - 2020) BMW 2 Series Gran Coupe F44 (2019 on) BMW 2 Series Active Tourer F45, F46 (2014 - 2019) BMW M2 F87 (2015 on) BMW 3 Series E46 (1999 - 2006) BMW 3 Series E90, E91, E92, E93 (2005 - 2013) BMW 3 Series F30, F31, F34 (2011 - 2018) BMW M3 F80 (2011 - 2018) BMW 3 Series G20, G21, G28 (2018 on) BMW M3 G80 (2018 on) BMW 4 Series F32, F33, F36 (2013 - 2021) BMW M4 F82, F83 (2013 - 2021) BMW 4 Series G22, G23 (2020 on) BMW M4 G82, G83 (2020 on) BMW 5 Series E39 (1996 - 2004) BMW 5 Series E60, E61 (2003 - 2010) BMW 5 Series Gran Turismo F07 (2009 - 2016) BMW 5 Series F10, F11 (2010 - 2016) BMW 5 Series G30, G31 (2016 on) BMW M5 F90 (2017 on) BMW 6 Series E63, E64 (2003 - 2010) BMW 6 Series F06, F12, F13 (2011 - 2018) BMW 6 Series Gran Turismo G32 (2017 on) BMW 7 Series E38 (1994 - 2002) BMW 7 Series E65, E66, E67 (2001 - 2008) BMW 7 Series F01, F02, F03, F04 (2007 - 2016) BMW 7 Series G11, G12 (2015 on) BMW M8 F91, F92, F93 (2019 on) BMW 8 Series G14, G15, G16 (2018 on) BMW X1 E84 (2008 - 2015) BMW X1 F48 (2016 on) BMW X2 F39 (2017 on) BMW X3 E83 (2003 - 2010) BMW X3 F25 (2009 - 2017) BMW X3 F97, G01 (2017 on) BMW iX3 G08 (2020 on) BMW X4 F26 (2013 - 2018) BMW X4 F98, G02 (2018 on) BMW X5 E53 (1999 - 2006) BMW X5 E70 (2006 - 2013) BMW X5 F15, F85 (2013 - 2019)BMW X5 F85 M (2013 - 1018) BMW X5 F95, G05 (2018 on) BMW X6 E71, E72 (2007 - 2014) BMW X6 F16, F86 (2015 - 2019) BMW X6 F96, G06 (2019 on) BMW X7 G07 (2018 on) BMW Z4 E85, E86 (2003 - 2009) BMW Z4 E89 (2009 - 2018) BMW Z4 G29 (2018 on) Mini Hatch R50, R53 (2000 - 2006) Mini Hatch R56 (2006 - 2013) Mini Hatch F55, F56 (2014 on) Mini Cabriolet R52 (2000 - 2006) Mini Cabriolet R57 (2006 - 2013) Mini Cabriolet F57 (2014 on) Mini Clubman R55 (207 - 2014) Mini Clubman F54 (2015 on) Mini Countryman F60 (2017 on) Mini Coupe R58 (2011 - 2015) Mini Roadster R59 (2012 - 2015) Rolls Royce Ghost RR4 (2008 - 2018) Rolls Royce Phantom RR1 (2003 - 2017) Rolls Royce Phantom RR11, RR12 (2017 on) Rolls Royce Wraith RR5 (2012 - 2018) Rolls Royce Dawn RR6 (2015 - 2018) Rolls Royce Cullinan RR31 (2017 on) Toyota Supra MK5 J29 (2019 on) Bush Size: 80mm DiameterWeight: 136

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Anti-Roll Bar Bush 13mmProduct Notes: For F10 & F11 with Electronic Damping Control. Check bar diameter or part numbers before ordering. Bush Size: 13mmWeight: 369

Name: Rear Anti-Roll Bar Bush 13mmProduct Notes: For F10 & F11 with Electronic Damping Control. Check bar diameter or part numbers before ordering. Bush Size: 13mmWeight: 369

Name: Rear Anti-Roll Bar Bush 14mmProduct Notes: For F10 with MSport suspension, and F06 and F13 with Standard Suspension. Check Bar diameter or part numbers before ordering. Bush Size: 14mmWeight: 369