Wind (2010 - 2013)

Name: Front Anti Roll Bar Inner Bush 22mmProduct Notes: Check anti roll bar diameter before ordering. Bush Size: 22mmWeight: 124

Name: Front Anti Roll Bar Inner Bush 22mmProduct Notes: Check anti roll bar diameter before ordering. Bush Size: 22mmWeight: 124

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: Front Wishbone BushProduct Notes: PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response. Weight: 1280Fitting Instructions

Name: Front Wishbone Bush AdjustableProduct Notes: PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications. Weight: 1540Fitting Instructions

Name: Front Wishbone Bush AdjustableProduct Notes: PFF60-1001G Front Wishbone Bush Camber Adjustable uses the same design principle as the non-adjustable version above, but with a precision-machined stainless steel sleeve that provides a range of +/- 0.75 degrees of on-car camber adjustment, perfect for track and motorsport applications. Weight: 1540Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: PFF60-1001 Front Wishbone Bush uses our in-house CNC machined metal outer shell for better load distribution with a Black 95A durometer bush, resulting in a 25% increase in stiffness over OE for improved steering and braking response. Weight: 1280Fitting Instructions

Name: Lower Engine Mount InsertProduct Notes: PFF60-1020 Lower Engine Mount Insert is an affordable and easy to fit upgrade for the soft voided rubber mount, improving wheel hop, gear changes and throttle response. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount. Weight: 43

Name: Lower Engine Mount Insert Product Notes: PFF60-1020BLK Lower Engine Mount Insert is made using our Black Series 95A material for those who want no compromise, ultimate performance for the track or motorsport. Without PFF60-1020 the voids in the original mount can be clearly seen.With PFF60-1020 the voids in the original mount are filled, increasing the stiffness of the mount. Weight: 43

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam Mounting BushProduct Notes: Weight: 634Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 634Fitting Instructions