Ateca Rear Beam (2016-ON)

Name: Front Anti Roll Bar Bush 21.7mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 21.7mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 21.7mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 21.7mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 23.2mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23.2mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 23.2mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 23.2mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 24mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 24mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 127Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: For a camber adjustable bush use PFF85-501G. Weight: 451

Name: Front Wishbone Front BushProduct Notes: Weight: 451

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK. Bush Size: 65mmWeight: 1059Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G. Bush Size: 65mmWeight: 1059Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket without voids, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket with voids use PFF3-1320. For a cast bracket use PFF3-1321 Weight: 106

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 0

Name: Lower Torque Mount Small Bush Product Notes: PFF3-1326 Lower Torque Mount Bush is made from our stiffest Black 95A material to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. Weight: 100

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325BLK Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: PFF3-1325 Lower Torque Mount Bushis made from our stiffestBlack 95Amaterial to provide a durable replacement for the factory rubber bush to give road or tuned vehicles a sharper throttle response and more positive gear-change without compromising ride quality and NVH. An increase in stiffness by 50% over the worn OE rubber bush helps to reduce excessive engine movement caused by the torque reaction of the engine during acceleration and deceleration, one of the biggest causes of wheel-hop on tuned FWD or front-engined vehicles. Please check which type of bracket is fitted to the vehicle before ordering. See the part numbers above and photos below for reference. Weight: 132

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the cast bracket, see part numbers above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For an extruded bracket with voids use PFF3-1320. Weight: 97Fitting Instructions

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: Lower Torque Mount Small BushProduct Notes: Made using our Black 95A Durometer Material to increase stiffness over worn rubber by up to 50% and improve durability, preventing such things as wheel hop and imprecise gear-shifting. This bush fits the mount with the extruded bracket with voids, see part number above and photos below, check which bracket is fitted to the vehicle before ordering. For an extruded bracket without voids use PFF3-1324. For a cast bracket use PFF3-1321. Weight: 106

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122

Name: Rear Beam Mounting BushProduct Notes: Weight: 1133Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 1133Fitting Instructions