Zafira A (1999-2004)

Name: Front Lower Engine Mount Insert KitProduct Notes: This product is an insert for the original mount, it is not a full replacement bush. It is designed to fit the Z20LET Turbo 16v and Z22SE 16v engines. It will not fit vehicles fitted with automatic transmission. If fitting to any other engine, please check that our bush and the voiding on the original bush match. Weight: 213

Name: Front Lower Engine Mount Insert KitProduct Notes: This product is an insert for the original mount, it is not a full replacement bush. It is designed to fit the Z20LET Turbo 16v and Z22SE 16v engines. It will not fit vehicles fitted with automatic transmission. If fitting to any other engine, please check that our bush and the voiding on the original bush match. Weight: 213

Name: Front Subframe BushProduct Notes: Weight: 792Fitting Instructions

Name: Front Subframe BushProduct Notes: Weight: 792Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Weight: 336

Name: Front Wishbone Front BushProduct Notes: Weight: 336

Name: Front Wishbone Rear BushProduct Notes: Weight: 408

Name: Front Wishbone Rear BushProduct Notes: Weight: 408

Name: Gearbox Mount InsertProduct Notes: Fits MK4 Astra and Zafira A SRi/GSi models with engine codes Z16LET, Z20LET and Z22SE only. It also fits MK5 Astra and Zafira B engine types Z20LEL, R & H including VXR models. It also fits 1.7 (Z17DTx) & 1.9 CDTi 8v and 16v (Z19DTx) engines. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted, especially on diesel engines. Powerflex dealers and Vauxhall specialists, Courtenay Sport have produced their own comprehensive fitting guide for PFF80-1321.Click HERE for more information. Weight: 232

Name: Gearbox Mount InsertProduct Notes: Fits MK4 Astra and Zafira A SRi/GSi models with engine codes Z16LET, Z20LET and Z22SE only. It also fits MK5 Astra and Zafira B engine types Z20LEL, R & H including VXR models. It also fits 1.7 (Z17DTx) & 1.9 CDTi 8v and 16v (Z19DTx) engines. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted especially on diesel engines. Powerflex dealers and Vauxhall specialists, Courtenay Sport have produced their own comprehensive fitting guide for PFF80-1321.Click HERE for more information. Weight: 232

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam Mounting BushProduct Notes: Fits rear beams with a 60mm diameter bush Bush Size: 60mmWeight: 1112

Name: Rear Beam Mounting BushProduct Notes: Fits rear beams with a 60mm diameter bush Bush Size: 60mmWeight: 1112

Name: Universal Exhaust MountProduct Notes: For use with aftermarket exhaust systems that have a round hanging bracket. Quantity as required Bush Size: A=56mm B=38mmWeight: 88Fitting Instructions

Name: Universal Exhaust MountProduct Notes: Weight: 58Fitting Instructions

Name: Upper Right Engine Mounting Insert DieselProduct Notes: Fits 1.7, 1.9 and 2.0 diesel turbo models only. This in an insert that fits into and fills voids in the original rubber mount. Weight: 160

Name: Upper Right Engine Mounting Insert DieselProduct Notes: Fits 1.7, 1.9 and 2.0 diesel turbo models only. This in an insert that fits into and fills voids in the original rubber mount. Weight: 160

Name: Upper Right Engine Mounting Insert PetrolProduct Notes: Fits 2.0 turbo and 2.2 litre petrol engines only. This is an insert that fits into the voids of the OE rubber bush. Weight: 137

Name: Upper Right Engine Mounting Insert PetrolProduct Notes: Fits 2.0 turbo and 2.2 litre petrol engines only. This is an insert that fits into the voids of the OE rubber bush. Weight: 137