Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

ZR (2001-2005)

 
Engine Mount Stabiliser Large Bush

Name: Engine Mount Stabiliser Large BushProduct Notes: PFF63-418 and PFF63-419 fit both the Upper and Lower engine mounts, hence being 2 per car for each bush. Weight: 516

600.-

Engine Mount Stabiliser Large Bush

Name: Engine Mount Stabiliser Large BushProduct Notes: PFF63-418 and PFF63-419 fit both the Upper and Lower engine mounts, hence being 2 per car for each bush. This should be considered as a performance upgrade, not a standard replacement. Weight: 516

660.-

Engine Mount Stabiliser Large Bush (Diesel)

Name: Engine Mount Stabiliser Large Bush (Diesel)Product Notes: PFF63-418R and PFF63-419 suit both the Upper and Lower engine stabilizers, hence being 2 per car for each bush. If fitting this to a diesel-engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Weight: 516

600.-

Engine Mount Stabiliser Small Bush

Name: Engine Mount Stabiliser Small BushProduct Notes: PFF63-418 and PFF63-419 suit both the Upper and Lower engine mounts, hence being 2 per car for each bush. PFF63-419 will NOT fit V6 petrol models. Weight: 187

470.-

Engine Mount Stabiliser Small Bush

Name: Engine Mount Stabiliser Small BushProduct Notes: PFF63-418 and PFF63-419 suit both the Upper and Lower engine mounts, hence being 2 per car for each bush. PFF63-419 will NOT fit V6 petrol models. Weight: 187

470.-

Front Anti Roll Bar Bush 19mm

Name: Front Anti Roll Bar Bush 19mmProduct Notes: Rover 220 Turbo front roll bar size is 23mm. Please check anti roll bar diameter before ordering. Bush Size: 19mmWeight: 100

330.-

Front Anti Roll Bar Mounts 23mm

Name: Front Anti Roll Bar Mounts 23mmProduct Notes: Rover 220 Turbo front roll bar size is 23mm. For KV6 and M47R models ARB bushes are 24mm in diameter and K1.8 models are 23mm in diameter. Bush Size: 23mmWeight: 87

330.-

Front Anti Roll Bar Mounts 23mm

Name: Front Anti Roll Bar Mounts 23mmProduct Notes: Rover 220 Turbo front roll bar size is 23mm. For KV6 and M47R models ARB bushes are 24mm in diameter and K1.8 models are 23mm in diameter. Bush Size: 23mmWeight: 87

370.-

Gear Linkage Mount Front

Name: Gear Linkage Mount FrontProduct Notes: Fits manual PG1 type gearbox models only. This part fits gear linkages with a 40mm bore. For linkages with a 49mm bore please use PFF25-108. Bush Size: 40mmWeight: 58Fitting Instructions

290.-

Gear Linkage Mount Front

Name: Gear Linkage Mount FrontProduct Notes: Fits manual PG1 type gearbox models only. This part fits gear linkages with a 40mm bore. For linkages with a 49mm bore please use PFF25-108. Bush Size: 40mmWeight: 58Fitting Instructions

310.-

Gear Linkage Mount Rear

Name: Gear Linkage Mount RearProduct Notes: Fits manual R65 type gearbox models only Weight: 58Fitting Instructions

380.-

Gear Linkage Mount Rear

Name: Gear Linkage Mount RearProduct Notes: Fits manual R65 type gearbox models only Weight: 58Fitting Instructions

340.-

PowerAlign Wheel Mounting Guide Pin

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

420.-

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png