Clio II inc 172 & 182 (1998-2012)

Name: Dog Bone (Twisted) Engine Mount Bush KitProduct Notes: Fits Phase 2 172/182 Sport. Use PFF60-206K for Phase 1 172 Sport. Fits Twingo RS133 models from 02/11 only. Weight: 536Fitting Instructions

Name: Dog Bone (Twisted) Engine Mount Bush KitProduct Notes: Fits Phase 2 172/182 Sport. Use PFF60-206K for Phase 1 172 Sport. Fits Twingo RS133 models from 02/11 only. Weight: 536Fitting Instructions

Name: Dog Bone Engine Mount Bush KitProduct Notes: PFF60-206K will fit Phase 1 Petrol 172 models only & 2.0 Megane 2.0 petrol & 1.9 diesel models. PFF60-211K will fit Phase 2 Petrol 172 & 182 Sport Models Only. Weight: 447

Name: Dog Bone Engine Mount Bush KitProduct Notes: PFF60-206K will fit Phase 1 Petrol 172 models only & 2.0 Megane 2.0 petrol & 1.9 diesel models. PFF60-211K will fit Phase 2 Petrol 172 & 182 Sport Models Only. Weight: 447

Name: Front Anti Roll Bar Inner Bush 23mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 23mmWeight: 116

Name: Front Anti Roll Bar Inner Bush 23mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 23mmWeight: 116

Name: Front Anti Roll Bar Inner Bush 24mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 24mmWeight: 104

Name: Front Anti Roll Bar Inner Bush 24mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 24mmWeight: 104

Name: Front Anti Roll Bar Inner Bush 25mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 25mmWeight: 105

Name: Front Anti Roll Bar Inner Bush 25mmProduct Notes: Check anti roll bar diameter before ordering Bush Size: 25mmWeight: 105

Name: Front Anti Roll Bar Outer MountProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 23mmWeight: 114

Name: Front Anti Roll Bar Outer MountProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 23mmWeight: 114

Name: Front Anti Roll Bar Outer Mount 22mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 22mmWeight: 109

Name: Front Anti Roll Bar Outer Mount 22mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 22mmWeight: 109

Name: Front Lower Wishbone BushProduct Notes: Weight: 1477Fitting Instructions

Name: Front Lower Wishbone BushProduct Notes: Weight: 1477Fitting Instructions

Name: Front Lower Wishbone Bush, Camber AdjustableProduct Notes: PFF60-301G front lower wishbone bush is on-car adjustable with the supplied C spanner. It has a range of +/- 0.75 degrees camber adjustment enabling the geometry to be fine-tuned, thus improving the handling. For a non-adjustable bush, please use PFF60-301. Weight: 1656Fitting Instructions

Name: Front Lower Wishbone Bush, Camber AdjustableProduct Notes: PFF60-301G front lower wishbone bush is on-car adjustable with the supplied C spanner. It has a range of +/- 0.75 degrees camber adjustment enabling the geometry to be fine-tuned, thus improving the handling. For a non-adjustable bush, please use PFF60-301. Weight: 1656Fitting Instructions

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Strut Top MountProduct Notes: This part fits 172/182 & RS Sport models only Weight: 934Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: Front Upper Right Engine Mount Insert Product Notes: For Clio 172/182 Sport and Twingo RS133 models only. This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine to provide additional stability under acceleration. Weight: 240Fitting Instructions

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Camber Bolt Kit (14mm) Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts? Bush Size: M14 x 70mm Weight: 261 Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Powerflex Handling PackProduct Notes: Included within this pack are the following parts:PFF60-301 Front Lower Wishbone BushPFR60-310 Rear Beam Mounting BushPFR60-311 Rear Shock Upper MountPFF60-211KDog Bone (Twisted) Engine Mount Bush Kit Weight: 3172

Name: Rear Beam Mounting BushProduct Notes: Weight: 634Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: Weight: 634Fitting Instructions

Name: Rear Chassis Exhaust Mount BushProduct Notes: EXH020BLK is designed to replace the usually broken internal rubber bush and fits into the original bracket. This new part can be easily fitted by simply cutting the remnants of the rubber webbing from the bracket and pressing our bush into position. Vehicles with twin exhausts, eg 172/182, use 2 bushes. Weight: 203Fitting Instructions

Name: Rear Chassis Exhaust Mount BushProduct Notes: EXH020 is designed to replace the usually broken internal rubber bush and fits into the original bracket. This new part can be easily fitted by simply cutting the remnants of the rubber webbing from the bracket and pressing our bush into position. Vehicles with twin exhausts, eg 172/182, use 2 bushes. Weight: 203Fitting Instructions

Name: Rear Shock Upper MountProduct Notes: Bush Size: 9mm Bore Weight: 302Fitting Instructions

Name: Rear Shock Upper MountProduct Notes: Bush Size: 9mm Bore Weight: 302Fitting Instructions