Toyota

Name: Anti Roll Bar To Link Rod BushProduct Notes: PFR76-206 can be used for both the front and rear roll bar lower link kits. Weight: 56

Name: Engine Mount InsertProduct Notes: PFF5-5452 Engine Mount Insertisa two-piece kit made using our Red65A durometer material, designed to fill the voiding of the OE rubber mount to limit drivetrain movement and sharpen throttle response on standard or mildly tuned vehicles. Mount rigidity is increased by 100%. A small increase inNVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Fits 3.0ltr B58 engines only. Weight: 391Fitting Instructions

Name: Engine Mount InsertProduct Notes: PFF5-5452BLKEngine Mount Insert uses the same design as the Road Series part but with our 95A Black Series material to provide uncompromisedengine stability. Mount rigidity is increased by a huge 180%.An increase inNVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Fits 3.0ltr B58 engines only. Weight: 391Fitting Instructions

Name: Exhaust MountProduct Notes: Bush Size: 70mm x 35mm x 11.7mmWeight: 92Fitting Instructions

Name: Front Anti Roll Bar Bush 18.5mmProduct Notes: Bush Size: 18.5mmWeight: 110

Name: Front Anti Roll Bar Bush 18.5mmProduct Notes: Bush Size: 18.5mmWeight: 110

Name: Front Anti Roll Bar Bush 18.5mmProduct Notes: Bush Size: 18.5mmWeight: 110

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 185

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 185

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 122

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 122

Name: Front Anti Roll Bar Bush 18mmProduct Notes: Bush Size: 18mmWeight: 122

Name: Front Anti Roll Bar Bush 20mmProduct Notes: Please check anti roll bar measurement before ordering. This bush is made using our Black 95A material with a knurled bore for grease retention for enhanced stiffness and durability, whilst letting the anti-roll bar freely rotate. Bush Size: 20mmWeight: 73

Name: Front Anti Roll Bar Bush 20mmProduct Notes: Please check anti roll bar measurement before ordering. This bush is made using our Purple 80A material with a knurled bore for grease retention for enhanced stiffness and durability, whilst letting the anti-roll bar freely rotate. Bush Size: 20mmWeight: 73

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 103

Name: Front Anti Roll Bar Bush 22mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 22mmWeight: 103

Name: Front Anti Roll Bar Bush 23.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits standard models with a 23.2mm bar. Bush Size: 23.2 mmWeight: 226Fitting Instructions

Name: Front Anti Roll Bar bush 25mmProduct Notes: Fits aftermarket 25mm anti roll bars including Eibach. Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 148

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Fits aftermarket 25mm anti roll bars including Eibach. Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 148

Name: Front Anti Roll Bar Bush 28mmProduct Notes: Bush Size: 28Weight: 167

Name: Front Anti Roll Bar Bush 29mmProduct Notes: Bush Size: 29mmWeight: 122

Name: Front Anti Roll Bar Bush 29mmProduct Notes: Bush Size: 29mmWeight: 122

Name: Front Anti Roll Bar Bush 30mmProduct Notes: Weight: 167

Name: Front Anti Roll Bar Bush 31mmProduct Notes: Weight: 167

Name: Front Anti Roll Bar Link Rod Bush KitProduct Notes: One bush equates to 4 PU parts and is enough to do one side of the vehicle. Weight: 81

Name: Front Anti Roll Bar Mount 21mmProduct Notes: Bush Size: 21mmWeight: 87

Name: Front Anti-Roll Bar Bush 23.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits standard models with a 23.2mm bar. Bush Size: 23.2 mmWeight: 226Fitting Instructions

Name: Front Anti-Roll Bar Bush 24.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits Circuit Pack equipped models with the upgraded 24.2mm bar. Bush Size: 24.2 mmWeight: 226Fitting Instructions

Name: Front Anti-Roll Bar Bush 24.2 mmProduct Notes: 95A Durometer Anti-Roll Bushes that include our Anti-Roll Bar Lateral Support Clamps to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Fits Circuit Pack equipped models with the upgraded 24.2mm bar. Bush Size: 24.2 mmWeight: 226Fitting Instructions

Name: Front Arm Front BushProduct Notes: Fits EP82 Starlet Turbo only Bush Size: 34mm ODWeight: 328

Name: Front Arm Front BushProduct Notes: Fits EP82 Starlet Turbo only Bush Size: 34mm ODWeight: 328

Name: Front Arm Front Bush Caster AdjustProduct Notes: Allows on car adjustment of caster +/- 0,33 degrees, also has revised anti dive geometry. Weight: 859Fitting Instructions