Giulietta 940 (2010 -)

Name: Anti-Roll Bar Lateral Support Clamps 13-14mmProduct Notes: Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Bush Size: 13-14mmWeight: 56Fitting Instructions

Name: Anti-Roll Bar Lateral Support Clamps 15-16mmProduct Notes: Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Bush Size: 15-16mmWeight: 64Fitting Instructions

Name: Anti-Roll Bar Lateral Support Clamps 25-27mmProduct Notes: Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Bush Size: 25-27mmWeight: 92Fitting Instructions

Name: Front Anti Roll Bar Bush 25.4mmProduct Notes: Since the original rubber bushes are bonded and need to be cut away from the bar when fitting our bushes, it is recommended that at the same time, PFC25-27 Anti-Roll Bar Lateral Support Clamps are fitted to prevent side-to-side movement of the bar. Bush Size: 25.4mmWeight: 150

Name: Front Anti Roll Bar Bush 25.4mm Product Notes: Since the original rubber bushes are bonded and need to be cut away from the bar when fitting our bushes, it is recommended that at the same time, PFC25-27 Anti-Roll Bar Lateral Support Clamps are fitted to prevent side-to-side movement of the bar. Bush Size: 25.4mmWeight: 150

Name: Front Arm Front Bush Product Notes: PFF1-1001BLK is a replacement bush that is 11% stiffer than the original rubber bush. For a camber adjustable version of this bush please use PFF1-1001GBLK. Weight: 684

Name: Front Arm Front Bush Camber AdjustableProduct Notes: PFF1-1001GBLK is a replacement bush that is 11% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF1-1001BLK. Weight: 808Fitting Instructions

Name: Front Wishbone Front Bush Product Notes: PFF1-1001 is a replacement bush that is 11% stiffer than the original rubber bush. For a camber adjustable version of this bush please use PFF1-1001G. Weight: 684

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: PFF1-1001G is a replacement bush that is 11% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF1-1001. Weight: 808Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: PFF1-1002 is a replacement bush that in our purple Road Series material is 23% stiffer than the original bush. For a caster offset version of this part please use PFF1-1002G. Weight: 674Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: PFF1-1002BLK is a replacement bush that in our Black Series material is 168% stiffer than the original bush for Track/Competition use. For a caster offset version of this part please use PFF1-1002GBLK. Weight: 674Fitting Instructions

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF1-1002G is a replacement bush that in our purple Road Series material is 23% stiffer than the original rubber bush and gives a fixed 5mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF1-1002. Weight: 674Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF1-1002G is a replacment bush that in our Black Series material is 168% stiffer than the original rubber bush for Track/Competition use and gives a fixed 5mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF1-1002BLK. Weight: 674Fitting Instructions

Name: Lower Engine Mount Bush InsertProduct Notes: Insert for the original bush. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Our polyurethane insert kit ships with a bolt spacing sleeve made using our Shore A 95 Black material to take up the excessive tolerance on the bore of the original mount to further reduce engine movement under load. Weight: 92Fitting Instructions

Name: Lower Engine Mount Bush InsertProduct Notes: Insert for the original bush. An increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. Our polyurethane insert kit ships with a bolt spacing sleeve made using our Shore A 95 Black material to take up the excessive tolerance on the bore of the original mount to further reduce engine movement under load. Weight: 92Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Anti-Roll Bar Bush 14mm Product Notes: Fits 1.4L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-14 are used with PFC13-14 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 14mmWeight: 150

Name: Rear Anti-Roll Bar Bush 14mmProduct Notes: Fits 1.4L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-14 are used with PFC13-14 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 14mmWeight: 150

Name: Rear Anti-Roll Bar Bush 15mm Product Notes: Fits 1.6 - 2.0L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-15 are used with PFC15-16 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 15mmWeight: 150

Name: Rear Anti-Roll Bar Bush 15mm Product Notes: Fits 1.6 - 2.0L models. Please check anti roll bar diameter before ordering. Since the original bushes are bonded, it is reccomended that that PFR1-1013-15 are used with PFC15-16 Anti-Roll Bar Lateral Support Clamps prevent side to side movement. Bush Size: 15mmWeight: 150

Name: Rear Lower Arm Inner BushProduct Notes: Weight: 405Fitting Instructions

Name: Rear Lower Arm Inner BushProduct Notes: Weight: 405Fitting Instructions

Name: Rear Trailing Arm to Chassis Bush Product Notes: PFR1-1010 has a freely-rotating sleeve design. This prevents torsional twist in the bush material, aiding performance, reliability and increasing longevity. In addition, our part represents great value as the original bush cannot be purchased separately, with complete arms costing 345. Weight: 1477Fitting Instructions

Name: Rear Trailing Arm to Chassis Bush Product Notes: PFR1-1010has a freely-rotating sleeve design. This prevents torsional twist in the bush material, aiding performance, reliability and increasing longevity. In addition, our part represents great value as the original bush cannot be purchased separately, with complete arms costing 345. Weight: 1477Fitting Instructions

Name: Rear Trailing Arm to Hub Lower Bush Product Notes: Weight: 567Fitting Instructions

Name: Rear Trailing Arm to Hub Lower Bush Product Notes: Weight: 567Fitting Instructions

Name: Rear Trailing Arm to Hub Upper Bush Product Notes: Weight: 567Fitting Instructions

Name: Rear Trailing Arm to Hub Upper Bush Product Notes: Weight: 567Fitting Instructions