Zafira Tourer C (2011 - ON)

Name: Front Control Arm Front BushProduct Notes: Weight: 445

Name: Front Control Arm Front BushProduct Notes: Weight: 445

Name: Front Control Arm Rear BushProduct Notes: Weight: 823Fitting Instructions

Name: Front Control Arm Rear BushProduct Notes: Weight: 823Fitting Instructions

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol and diesel models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting Insert (Diesel)Product Notes: Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam Mounting BushProduct Notes: PFR80-1410 fits vehicles with Watt's linkage. For vehicles without Watt's linkage, please use PFR80-1310. Weight: 956

Name: Rear Beam Mounting BushProduct Notes: PFR80-1410 fits vehicles with Watt's linkage. For vehicles without Watt's linkage, please use PFR80-1310. Weight: 956

Name: Rear Beam Mounting BushProduct Notes: PFR80-1310 fits vehicles without Watt's linkage. For vehicles with Watt's linkage, please use PFR80-1410. Weight: 1247Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: PFR80-1310 fits vehicles without Watt's linkage. For vehicles with Watt's linkage, please use PFR80-1410. Weight: 1247Fitting Instructions

Name: Rear Engine Mounting InsertProduct Notes: This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Recommended for petrol models. For diesel models use PFF80-1421R. Weight: 339

Name: Rear Engine Mounting InsertProduct Notes: This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. Weight: 339

Name: Rear Engine Mounting Insert Diesel Product Notes: This part is designed to limit movement of the original voided rubber mount whilst being mindful of vibration transmitted to the vehicle and is recommended for diesel models. Weight: 339

Name: Rear Exhaust MountProduct Notes: EXH030BLK is designed to replace the original rubber bush that can become unbonded from the metal housing/bracket. Fits single or twin-mount brackets. Weight: 145Fitting Instructions

Name: Rear Exhaust MountProduct Notes: EXH030 is designed to replace the original rubber bush that can become unbonded from the metal housing/bracket. Fits single or twin-mount brackets. Weight: 145Fitting Instructions

Name: Rear Panhard Rod Outer BushProduct Notes: Weight: 358

Name: Rear Panhard Rod Outer BushProduct Notes: Weight: 358