Z1 (1988 - 1991)

Name: Adjustable Rear Lower Control Arm KitProduct Notes: This adjustable lower arm and bush combination provides +1.0 to -3.0 of on-car rear camber adjustment, useful to correct excessive camber issues on heavily lowered cars. The high-performance polyurethane bushes are suitable for road and track use without the comfort and longevity issues associated with spherical joints. For a replacement bush only to fit in the original arm, please use PFR5-4616. Weight: 3210Fitting Instructions

Name: Clutch Fork Pivot PinProduct Notes: The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. PFF5-370 vs. Plastic BMW OEM Clutch Pivot PinPowerflex Stainless Steel Clutch Pin vs. worn-out factory Clutch Pivot Pin Weight: 45Fitting Instructions

Name: Front Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 180

Name: Front Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 180

Name: Front Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 180

Name: Front Anti Roll Bar Link Rod BushProduct Notes: This part is designed to fit models where the Anti Roll Bar joins lower arm, not the shock absorber. This part will not fit the E36 M3 and Z3M models as a consequence. Weight: 142

Name: Front Anti Roll Bar Link Rod BushProduct Notes: This part is designed to fit models where the Anti Roll Bar joins lower arm not the shock absorber.This part will not fit the E36 M3 and Z3M models as a consequence. Weight: 142

Name: Front Anti Roll Bar Link Rod BushProduct Notes: This part is designed to fit models where the Anti Roll Bar joins lower arm, not the shock absorber. This part will not fit the E36 M3 and Z3M models as a consequence. Weight: 142

Name: Front Lower Wishbone Rear Bush (Concentric)Product Notes: Use PFF5-303 for the M3, or if increased caster is required. Weight: 287Fitting Instructions

Name: Front Lower Wishbone Rear Bush (Concentric)Product Notes: Use PFF5-303 for the M3, or if increased caster is required. Weight: 287

Name: Front Lower Wishbone Rear Bush (Concentric)Product Notes: Use PFF5-303 for the M3, or if increased caster is required. Weight: 287Fitting Instructions

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)Product Notes: PFF5-3603BLK Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. PFF5-3603BLK uses a CNC-machined Aluminium outer shell to increase stiffness and durability further for the most demanding high-stress conditions. Weight: 596Fitting Instructions

Name: Front Wishbone Rear Bush (E46 Hybrid)Product Notes: PFF5-3601BLK Front Wishbone Rear Bush (E46 Hybrid) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner and outer bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. Weight: 386Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer Caster OffsetProduct Notes: PFF5-5303 includes a CNC-machined aluminium outer shell with an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. By including the shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium Outer Caster OffsetProduct Notes: PFF5-5303 includes a CNC-machined aluminium outer shell with an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. By including the shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

Name: Gear Shift Arm Front Bush RoundProduct Notes: Bush Size: 26mm LongWeight: 26

Name: Gear Shift Arm Front Bush RoundProduct Notes: Bush Size: 26mm LongWeight: 26

Name: Gear Shift Arm Front Bush Round Product Notes: Bush Size: 26mm LongWeight: 26

Name: Offset Lower Radiator Mount KitProduct Notes: Made in our Red 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radiator, making them an easy swap out. Weight: 57Fitting Instructions

Name: Offset Lower Radiator Mount KitProduct Notes: Made in our Grey 65A durometer material, the offset bushes move the bottomof the radiator forward by 8mm to add needed clearance for the expansion tank/pulley on larger core radiators and to prevent it from touching and causing a potentially catastrophic engine failure, especially if the engine mounts are worn. They can also be fitted without draining down the coolant system and removing the radiator, making them an easy swap out. Weight: 57Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Anti Roll Bar Mounting Bush 14mmProduct Notes: Suitable for both 14mm and 14.5mm bars Bush Size: 14mmWeight: 74

Name: Rear Anti Roll Bar Mounting Bush 14mmProduct Notes: Suitable for both 14mm and 14.5mm bars Bush Size: 14mmWeight: 74

Name: Rear Anti Roll Bar Mounting Bush 14mmProduct Notes: Suitable for both 14mm and 14.5mm bars Bush Size: 14mmWeight: 74

Name: Rear Lower Wishbone Inner BushProduct Notes: This part replaces the bush in the original arm OE number: 33326770813 and 33326770824 respectively. To make adjustments to the vehicles camber angles for precision alignment, please use PFR5-4615G that replaces the original arm and bush. Weight: 450Fitting Instructions

Name: Rear Lower Wishbone Inner BushProduct Notes: This part replaces the bush in the original arm OE number: 33326770813 and 33326770824 respectively. To make adjustments to the vehicles camber angles for precision alignment, please use PFR5-4615G that replaces the original arm and bush. Weight: 450Fitting Instructions

Name: Rear Lower Wishbone Inner BushProduct Notes: This part replaces the bush in the original arm OE number: 33326770813 and 33326770824 respectively. To make adjustments to the vehicles camber angles for precision alignment, please use PFR5-4615G that replaces the original arm and bush. Weight: 450Fitting Instructions