911 997 (2005-2013)

Name: Bolt-On Jack Pad Adaptor KitProduct Notes: PF57-561K Bolt-On Jack Pad Adaptor Kit is a kit of four anodised CNC-machined 6082-grade aluminium Jack Pads with a 95A durometer anti-slip base that fit into the four underbody lifting points on most modern Porsche vehicles including the classic 911. They are designed to help lift stability and location whilst protecting the underside of your vehicle from damage. To fit, locate the Jack Pad into the elongated factory lifting point, turn through 90 degrees and lock down securely using the plated Allen bolt with a standard 5mm Allen key. It's as simple as that! Bush Size: 70mmWeight: 881

Name: Engine Intake Sleeve KitProduct Notes: Supplied as an engine set of 6, our new PFR57-526K Engine Intake Sleeve Kit is made in our Dark Grey 80A polyurethane material for an OE aesthetic with increased durability and reliability over the equivalent rubber items which from what we have been told, are no longer available from Porsche! Each sleeve is designed and engineered to seal and link both sides of the intake system, with the supplied high-quality, stainless-steel hose clamps ensuring a tight fit and consistent engine vacuum, making them a must-have for any engine build. Please note, this kit fits 996 GT3 & 997 GT3 models only. Weight: 1

Name: Front Anti Roll Bar Bush 23.5mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 23.5mmWeight: 77

Name: Front Anti Roll Bar Bush 23.5mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 23.5mmWeight: 77

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 24mmWeight: 88

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti-roll bar diameter before ordering. Bush Size: 24mmWeight: 88

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Fits 987.2 and 997.2 with the optional Porsche Active Suspension Management (PASM). Bush Size: 25mmWeight: 80

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Fits 987.2 and 997.2 with the optional Porsche Active Suspension Management (PASM). Bush Size: 25mmWeight: 80

Name: Front Track Control Arm Caster Offset Outer BushProduct Notes: PFF57-502GBLK uses a Black 95A 80A durometer bush and an offset bore sleeve to allow up to 0.4deg of caster increase from OE. This allows for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain. It fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only. All other 997 models use PFF57-802GBLK. Weight: 393Fitting Instructions

Name: Front Track Control Arm Caster Offset Outer BushProduct Notes: PFF57-502G uses a Purple 80A durometer bush and an offset bore sleeve to allow up to 0.4deg of caster increase from OE. This allows for steering pull correction or a more aggressive steering axis angle for increased steering feel and in-corner camber gain. It fits the front of all 996 and Boxster 986 models, and the front of the 997 GT2, GT3 & GT3RS models only. All other 997 models use PFF57-802G. Weight: 393Fitting Instructions

Name: Front Track Control Arm Inner Bush, Camber AdjustableProduct Notes: PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75. For non-adjustable TCA bushes on 996 and 997 models use PFF57-503. Weight: 920Fitting Instructions

Name: Front Track Control Arm Inner Bush, Camber AdjustableProduct Notes: PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75. For non-adjustable TCA bushes on 996 and 997 models use PFF57-503. Weight: 920Fitting Instructions

Name: Front Track Control Arm Outer BushProduct Notes: Weight: 455Fitting Instructions

Name: Front Track Control Arm Outer BushProduct Notes: Weight: 455Fitting Instructions

Name: Front Track Control Arm Outer Bush, Caster AdjustableProduct Notes: PFF57-802 uses our Black 95A material for ultimate performance and is supplied with a CNC machined sleeve and spanner for on-car adjustment of caster, with the sleeve being made from stainless steel 303 for increased corrosion and wear resistance. Weight: 1109

Name: Front Track Control Arm Outer Bush, Caster AdjustableProduct Notes: PFF57-802 uses our Black 95A material for ultimate performance and is supplied with a CNC machined sleeve and spanner for on-car adjustment of caster, with the sleeve being made from stainless steel 303 for increased corrosion and wear resistance. Weight: 1109

Name: Gearbox Front Mounting Bush Insert Product Notes: Fits manual gearbox with a single bush in the end casing except for Turbo GT2 & GT3 models which use PFR57-531. Does not fit Gen 2 997 models. For Gen 2 models please use PFR57-533. This part fits the following vehicles:Porsche 911 Carrera 4 Convertible 3.6L H6 Chassis 997 (2006-2008)Porsche 911 Carrera 4 Coupe 3.6L H6 Chassis 997 (2006-2008)Porsche 911 Carrera Convertible 3.6L H6 Chassis 996 (2005)Porsche 911 Carrera Convertible 3.6L H6 Chassis 997 (2005-2008)Porsche 911 Carrera Coupe 3.6L H6 Chassis 996 (2005)Porsche 911 Carrera Coupe 3.6L H6 Chassis 997 (2005-2008) Weight: 225

Name: Gearbox Front Mounting Bush Insert Product Notes: Fits manual gearbox with a single bush in the end casing except for Turbo GT2 & GT3 models which use PFR57-531. Does not fit Gen 2 997 models. For Gen 2 models please use PFR57-533. This part fits the following vehicles:Porsche 911 Carrera 4 Convertible 3.6L H6 Chassis 997 (2006-2008)Porsche 911 Carrera 4 Coupe 3.6L H6 Chassis 997 (2006-2008)Porsche 911 Carrera Convertible 3.6L H6 Chassis 996 (2005)Porsche 911 Carrera Convertible 3.6L H6 Chassis 997 (2005-2008)Porsche 911 Carrera Coupe 3.6L H6 Chassis 996 (2005)Porsche 911 Carrera Coupe 3.6L H6 Chassis 997 (2005-2008) Weight: 225

Name: Gearbox Front Mounting Bush Insert Product Notes: Fits Gen 2 manual and PDK gearbox's with a single bush in the end casing except for Turbo GT2 & GT3 models which use PFR57-531. For Gen 1 models please use PFR57-532. This part fits the following manual and PDK vehicles:Porsche 911 Carrera 4 Convertible 3.6L H6 - Chassis 997 (2009-2012)Porsche 911 Carrera 4 Coupe 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4 GTS Convertible 3.8L H6 - Chassis 997(2012)Porsche 911 Carrera 4 GTS Coupe 3.8L H6 - Chassis 997(2012)Porsche 911 Carrera 4S Convertible 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4S Coupe 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera Convertible 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera Coupe 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera GTS Convertible 3.8L H6 - Chassis 997(2011-2012)Porsche 911 Carrera GTS Coupe 3.8L H6 - Chassis 997(2011-2012)Porsche 911 Carrera S Convertible 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera S Coupe 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Targa 4 Coupe 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4 Targa 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Targa 4S Coupe 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4S Targa 3.8L H6 - Chassis 997(2009-2012) Weight: 193Fitting Instructions

Name: Gearbox Front Mounting Bush Insert Product Notes: Fits Gen 2 manual and PDK gearbox's with a single bush in the end casing except for Turbo GT2 & GT3 models which use PFR57-531. For Gen 1 models please use PFR57-532. This part fits the following manual and PDK vehicles:Porsche 911 Carrera 4 Convertible 3.6L H6 - Chassis 997 (2009-2012)Porsche 911 Carrera 4 Coupe 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4 GTS Convertible 3.8L H6 - Chassis 997(2012)Porsche 911 Carrera 4 GTS Coupe 3.8L H6 - Chassis 997(2012)Porsche 911 Carrera 4S Convertible 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4S Coupe 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera Convertible 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera Coupe 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera GTS Convertible 3.8L H6 - Chassis 997(2011-2012)Porsche 911 Carrera GTS Coupe 3.8L H6 - Chassis 997(2011-2012)Porsche 911 Carrera S Convertible 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera S Coupe 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Targa 4 Coupe 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4 Targa 3.6L H6 - Chassis 997(2009-2012)Porsche 911 Targa 4S Coupe 3.8L H6 - Chassis 997(2009-2012)Porsche 911 Carrera 4S Targa 3.8L H6 - Chassis 997(2009-2012) Weight: 193Fitting Instructions

Name: Gearbox Front Mounting Bush Insert KitProduct Notes: Fits 996 & 997 vehicles with the twin bush mounting bracket, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush in the end casing use PFR57-530BLK. This will not fit the original 99637503303 transmission carrier. This part fits the following vehicles:Porsche 996 (1999-2005)Porsche 996 Carrera 4 (2002-04)Porsche 996 Carrera and Carrera 4S (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Note: Automatic TransmissionPorsche 996 GT2 and GT3 Coupe (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Manual TransmissionPorsche 997 (2005-2013)Porsche 997 Carrera 4 and Carrera 4S (2006-08)Porsche 997 Carrera and Carrera S (2005-08)Porsche 997 Targa 4 and Targa 4S (2007-08)Porsche 997 Turbo (2007-09) Note: Automatic TransmissionPorsche 997 GT3 RS 4.0 Coupe (2011)Porsche 997 GT3 and GT3 RS Coupe (2007-11)Porsche 997 Turbo (2007-13) Manual Transmission Weight: 160

Name: Gearbox Front Mounting Bush Insert KitProduct Notes: Fits 996 & 997 vehicles with the twin bush mounting bracket, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush in the end casing use PFR57-530. This will not fit the original 99637503303 transmission carrier. This part fits the following vehicles:Porsche 996 (1999-2005)Porsche 996 Carrera 4 (2002-04)Porsche 996 Carrera and Carrera 4S (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Note: Automatic TransmissionPorsche 996 GT2 and GT3 Coupe (2002-05)Porsche 996 Turbo and Turbo S Coupe (2001-05) Manual TransmissionPorsche 997 (2005-2013)Porsche 997 Carrera 4 and Carrera 4S (2006-08)Porsche 997 Carrera and Carrera S (2005-08)Porsche 997 Targa 4 and Targa 4S (2007-08)Porsche 997 Turbo (2007-09) Note: Automatic TransmissionPorsche 997 GT3 RS 4.0 Coupe (2011)Porsche 997 GT3 and GT3 RS Coupe (2007-11)Porsche 997 Turbo (2007-13) Manual Transmission Weight: 160

Name: Jack Pad AdaptorProduct Notes: PF57-560 is a CNC aluminium jack pad that fits into the elongated lifting point on most modern Porsche vehicles, with a simple twist and lock action to locate securely. It is designed to help lift stability and location, whilst protecting the underside of your vehicle using high-strength 95A durometer polyurethane lifting pads, making this a must-have for Porsche owners and specialists alike. Bush Size: 73mmWeight: 309Fitting Instructions

Name: Rear Anti Roll Bar Bush 18.5mmProduct Notes: Bush Size: 18.5mmWeight: 67

Name: Rear Anti Roll Bar Bush 18.5mmProduct Notes: Bush Size: 18.5mmWeight: 67

Name: Rear Anti Roll Bar Bush 19.6mmProduct Notes: Bush Size: 19.6mmWeight: 67

Name: Rear Anti Roll Bar Bush 19.6mmProduct Notes: Bush Size: 19.6mmWeight: 67

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Bush Size: 19mmWeight: 67

Name: Rear Anti Roll Bar Bush 19mmProduct Notes: Bush Size: 19mmWeight: 67

Name: Rear Anti Roll Bar Bush 20mmProduct Notes: Bush Size: 20mmWeight: 75

Name: Rear Anti Roll Bar Bush 20mmProduct Notes: Bush Size: 20mmWeight: 75

Name: Rear Anti Roll Bar Bush 21mmProduct Notes: Bush Size: 21mmWeight: 61