Tiguan Models

Name: Front Anti Roll Bar Bush 23.6mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 23.6mmWeight: 146Fitting Instructions

Name: Front Anti Roll Bar Bush 23.6mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 23.6mmWeight: 146Fitting Instructions

Name: Front Anti Roll Bar Bush 23mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 23mmWeight: 150Fitting Instructions

Name: Front Anti Roll Bar Bush 23mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 23mmWeight: 150Fitting Instructions

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 24mmWeight: 154Fitting Instructions

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check anti roll bar diameter before ordering Bush Size: 24mmWeight: 154Fitting Instructions

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 127Fitting Instructions

Name: Front Anti Roll Bar Bush 25mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 25mmWeight: 127Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Fast Road/TrackProduct Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Fast Road/TrackProduct Notes: PFF85-831P replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. This part is made in our Purple Shore A 80 for vehicles running increased power or that see occasional track use. Weight: 519Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - RoadProduct Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - RoadProduct Notes: PFF85-831 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. Weight: 519Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Track/MSport Product Notes: PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. Weight: 493Fitting Instructions

Name: Front Lower Engine Mount Hybrid Bush (Large) - Track/MSportProduct Notes: PFF85-831 replaces the lower half of the original bush OEM part number 5Q0 198 037 / 5Q0 198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. Weight: 519Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: For a camber adjustable bush use PFF85-501G. Weight: 451

Name: Front Wishbone Front BushProduct Notes: Weight: 451

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Front Bush Camber AdjustableProduct Notes: This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. Weight: 550Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Made in our Black 95A material with a tapered bore to reduce stress during articulation, this bush fits vehicles with the combination of an aluminium subframe (OE Part No. 5Q0199369, 5WA199369A and 3Q0199369E) and pressed-steel wishbones only. For vehicles with a steel subframe, please use PFF85-802. For vehicles requiring further on-car caster adjustment, please use PFF3-902G. Weight: 1219

Name: Front Wishbone Rear BushProduct Notes: Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G. Bush Size: 65mmWeight: 1059Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear Bush Product Notes: Weight: 479Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1925Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1925Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

Name: Jacking Point Insert Product Notes: PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. Fits the following vehicles:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Octavia 5E (2012-2019) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2011) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 105Fitting Instructions

Name: Jacking Point Insert Kit of 4Product Notes: PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to avoid damage. For those that have the OE lifting adaptors, PFF3-1662 Magnetic Jack Pad is a CNC-machined Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time, again recommended for use in sets of 4 simultaneously. Fits the following vehicles:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2015) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 400Fitting Instructions

Name: Lower Engine Mount (Large) InsertProduct Notes: Weight: 240Fitting Instructions

Name: Lower Engine Mount (Large) InsertProduct Notes: Weight: 245Fitting Instructions

Name: Lower Engine Mount (Large) Insert DieselProduct Notes: Some NVH transmission should be expected when fitting this part to a Diesel vehicle. Weight: 240Fitting Instructions

Name: Lower Engine Mount (Large) Insert Track UseProduct Notes: Made in Purple 80A and suitable for higher powered cars and track cars, this part helps to further reduce engine movement over fitting the standard PFF85-832 insert. Increased NVH may be felt when fitted. Weight: 240Fitting Instructions