Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

E30 inc M3 (1982 - 1991)

 
BMW E30 inc M3

Name: BMW E30 inc M3Product Notes: Included within this handling pack are the following parts:PFF5-303Front Lower Wishbone Rear Bush Caster OffsetPFR5-305Rear Beam Mounting BushPFR5-306Rear Trailing Arm BushPFR5-300Rear Diff Mounting BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 2759

5440.-

Clutch Fork Pivot Pin

Name: Clutch Fork Pivot PinProduct Notes: The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. PFF5-370 vs. Plastic BMW OEM Clutch Pivot PinPowerflex Stainless Steel Clutch Pin vs. worn-out factory Clutch Pivot Pin Weight: 45Fitting Instructions

380.-

Front Anti Roll Bar Link Rod Bush

Name: Front Anti Roll Bar Link Rod BushProduct Notes: This part is designed to fit models where the Anti Roll Bar joins lower arm, not the shock absorber. This part will not fit the E36 M3 and Z3M models as a consequence. Weight: 142

460.-

Front Anti Roll Bar Link Rod Bush

Name: Front Anti Roll Bar Link Rod BushProduct Notes: This part is designed to fit models where the Anti Roll Bar joins lower arm not the shock absorber.This part will not fit the E36 M3 and Z3M models as a consequence. Weight: 142

500.-

Front Anti Roll Bar Link Rod Bush

Name: Front Anti Roll Bar Link Rod BushProduct Notes: This part is designed to fit models where the Anti Roll Bar joins lower arm, not the shock absorber. This part will not fit the E36 M3 and Z3M models as a consequence. Weight: 142

460.-

Front Lower Wishbone Rear Bush Caster Offset

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

590.-

Front Lower Wishbone Rear Bush Caster Offset

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

590.-

Front Lower Wishbone Rear Bush Caster Offset

Name: Front Lower Wishbone Rear Bush Caster OffsetProduct Notes: PFF5-303 has an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. For M3 (not Evo) or for non-M models. Weight: 397Fitting Instructions

650.-

Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)

Name: Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)Product Notes: PFF5-3603BLK Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. PFF5-3603BLK uses a CNC-machined Aluminium outer shell to increase stiffness and durability further for the most demanding high-stress conditions. Weight: 596Fitting Instructions

1000.-

Front Wishbone Rear Bush (E46 Hybrid)

Name: Front Wishbone Rear Bush (E46 Hybrid)Product Notes: PFF5-3601BLK Front Wishbone Rear Bush (E46 Hybrid) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner and outer bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. Weight: 386Fitting Instructions

670.-

Front Wishbone Rear Bush, Aluminium Outer (Concentric)

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

1140.-

Front Wishbone Rear Bush, Aluminium Outer (Concentric)

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

1250.-

Viser 1 til 32 (av 84 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png