Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

E46 (1999 - 2006)

 
Adjustable Rear Lower Control Arm Kit

Name: Adjustable Rear Lower Control Arm KitProduct Notes: This adjustable lower arm and bush combination provides +1.0 to -3.0 of on-car rear camber adjustment, useful to correct excessive camber issues on heavily lowered cars. The high-performance polyurethane bushes are suitable for road and track use without the comfort and longevity issues associated with spherical joints. For a replacement bush only to fit in the original arm, please use PFR5-4616. Weight: 3210Fitting Instructions

2860.-

BMW E46 (non M3)

Name: BMW E46 (non M3)Product Notes: Suitable for Non M3 - 66mm. Included within this handling pack are the following parts:PFF5-4601 Front Wishbone Rear BushPFR5-3608Rear Trailing Arm Front BushPFR5-4610 Rear Subframe Front BushPFR5-4611 Rear Subframe Rear Bush Weight: 3457

5990.-

BMW E46 M3

Name: BMW E46 M3Product Notes: M3 only - Not suitable for Track / Motorsport Included within this handling pack are the following parts:PFF5-4601M3Front Wishbone Rear BushPFR5-3608Rear Trailing Arm BushPFR5-4610M3Rear Subframe Front BushPFR5-4611Rear Subframe Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 3457Fitting Instructions

5930.-

Clutch Fork Pivot Pin

Name: Clutch Fork Pivot PinProduct Notes: The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. FF5-470 vs. Plastic BMW OEM Clutch Pivot PinPowerflex Stainless Steel Clutch Pin vs. worn-out factory Clutch Pivot Pin Weight: 59Fitting Instructions

380.-

Engine Mount

Name: Engine MountProduct Notes: Tuneable engine mounts to suit your driving demands. This mount uses our Black 95A material and can be stiffened further using the Black 95A pins. It fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit any 4-cyl petrol models. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The graph above shows Load vs Displacement, peaking at 5mm displacement.PFF5-4650BLK is nearly 700% stiffer than OE at 5mm compression. Weight: 1635Fitting Instructions

3500.-

Engine Mount

Name: Engine MountProduct Notes: Tuneable engine mounts to suit your driving demands. This mount uses a combination of our Red 65A and Purple 80A materials and can be stiffened further using the Black 95A pins. It fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit any 4-cyl petrol models. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The graph above shows Load vs Displacement, peaking at 5mm displacement.PFF5-4650 is just under 200% stiffer than OE at 5mm compression, increasing to 300%with the 4 adjuster pins installed. Weight: 1635Fitting Instructions

3180.-

Exhaust Mounting Bush & Bracket

Name: Exhaust Mounting Bush & BracketProduct Notes: Fits all petrol models of E46 except M3. For M3 vehicles please use EXH034. Weight: 247Fitting Instructions

1320.-

Exhaust Mounting Bush & Bracket

Name: Exhaust Mounting Bush & BracketProduct Notes: Fits all models of E46 except M3. For M3 vehicles please use EXH034. Weight: 247Fitting Instructions

1200.-

Front Anti Roll Bar Bush 26mm

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits non-CSL M3 only. Please check Anti roll bar size before ordering Bush Size: 26mmWeight: 304

420.-

Front Anti Roll Bar Bush 26mm

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits non-CSL M3 only. Please check Anti roll bar size before ordering Bush Size: 26mmWeight: 304

420.-

Front Anti Roll Bar Bush 26mm

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits non-CSL M3 only. Please check Anti roll bar size before ordering Bush Size: 26mmWeight: 304

460.-

Front Anti Roll Bar Bush 30.8mm

Name: Front Anti Roll Bar Bush 30.8mm Product Notes: Fits CSL models only. Please check Anti roll bar size before ordering Bush Size: 30.8mmWeight: 286

420.-

Front Anti Roll Bar Bush 30.8mm

Name: Front Anti Roll Bar Bush 30.8mm Product Notes: Fits CSL models only. Please check Anti roll bar size before ordering Bush Size: 30.8mmWeight: 286

460.-

Front Anti Roll Bar Bush 30.8mm

Name: Front Anti Roll Bar Bush 30.8mm Product Notes: Fits CSL models only. Please check Anti roll bar size before ordering Bush Size: 30.8mmWeight: 286

420.-

Front Anti Roll Bar Mounting Bush 27mm

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

420.-

Front Anti Roll Bar Mounting Bush 27mm

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

420.-

Front Anti Roll Bar Mounting Bush 27mm

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

460.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This part is not suitable for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if this is the intended use for your vehicle. Bush Size: 60mmWeight: 528Fitting Instructions

650.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

650.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

590.-

Viser 1 til 32 (av 142 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png