E46 (1999 - 2006)

Name: Adjustable Rear Lower Control Arm KitProduct Notes: This adjustable lower arm and bush combination provides +1.0 to -3.0 of on-car rear camber adjustment, useful to correct excessive camber issues on heavily lowered cars. The high-performance polyurethane bushes are suitable for road and track use without the comfort and longevity issues associated with spherical joints. For a replacement bush only to fit in the original arm, please use PFR5-4616. Weight: 3210Fitting Instructions

Name: BMW E46 (non M3)Product Notes: Suitable for Non M3 - 66mm. Included within this handling pack are the following parts:PFF5-4601 Front Wishbone Rear BushPFR5-3608Rear Trailing Arm Front BushPFR5-4610 Rear Subframe Front BushPFR5-4611 Rear Subframe Rear Bush Weight: 3457

Name: BMW E46 M3Product Notes: M3 only - Not suitable for Track / Motorsport Included within this handling pack are the following parts:PFF5-4601M3Front Wishbone Rear BushPFR5-3608Rear Trailing Arm BushPFR5-4610M3Rear Subframe Front BushPFR5-4611Rear Subframe Rear BushThis Handling Pack contains a selection of parts from a complete vehicle listing, clickhereto see more parts available. Weight: 3457Fitting Instructions

Name: BMW Exhaust Mounting Bush & BracketProduct Notes: Weight: 273Fitting Instructions

Name: Clutch Fork Pivot PinProduct Notes: The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass ones) are known to squeak, wear excessively and even break over time and when used with high-pressure performance clutches. Our CNC-machined 303-grade stainless steel clutch fork pivot pins solves this issue, as a fit and forget part with our lifetime warranty. Fits manual transmissions only. FF5-470 vs. Plastic BMW OEM Clutch Pivot PinPowerflex Stainless Steel Clutch Pin vs. worn-out factory Clutch Pivot Pin Weight: 59Fitting Instructions

Name: Engine MountProduct Notes: Tuneable engine mounts to suit your driving demands. This mount uses a combination of our Red 65A and Purple 80A materials and can be stiffened further using the Black 95A pins. It fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit any 4-cyl petrol models. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The graph above shows Load vs Displacement, peaking at 5mm displacement.PFF5-4650 is just under 200% stiffer than OE at 5mm compression, increasing to 300%with the 4 adjuster pins installed. Weight: 1635Fitting Instructions

Name: Engine MountProduct Notes: Tuneable engine mounts to suit your driving demands. This mount uses our Black 95A material and can be stiffened further using the Black 95A pins. It fits 6-cyl models only except the E46 Xi and Convertible models, and for the E9* it fits the M3 only. It will not fit any 4-cyl petrol models. An increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. We do not recommend fitting these mounts to diesel-engined vehicles due to excessive NVH. The graph above shows Load vs Displacement, peaking at 5mm displacement.PFF5-4650BLK is nearly 700% stiffer than OE at 5mm compression. Weight: 1635Fitting Instructions

Name: Exhaust Mounting Bush & BracketProduct Notes: Weight: 273Fitting Instructions

Name: Exhaust Mounting Bush & BracketProduct Notes: Fits all models of E46 except M3. For M3 vehicles please use EXH034. Weight: 247Fitting Instructions

Name: Exhaust Mounting Bush & BracketProduct Notes: Fits all petrol models of E46 except M3. For M3 vehicles please use EXH034. Weight: 247Fitting Instructions

Name: Front Anti Roll Bar Bush 22.5mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 22.5mmWeight: 331

Name: Front Anti Roll Bar Bush 22.5mmProduct Notes: Please check bar size before ordering Bush Size: 22.5mmWeight: 331

Name: Front Anti Roll Bar Bush 23.5mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 23.5mmWeight: 322

Name: Front Anti Roll Bar Bush 23.5mmProduct Notes: Please check bar size before ordering Bush Size: 23.5mmWeight: 322

Name: Front Anti Roll Bar Bush 23mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 23mmWeight: 313

Name: Front Anti Roll Bar Bush 23mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 23mmWeight: 313

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 24mmWeight: 312

Name: Front Anti Roll Bar Bush 24mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 24mmWeight: 312

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits non-CSL M3 only. Please check Anti roll bar size before ordering Bush Size: 26mmWeight: 304

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits non-CSL M3 only. Please check Anti roll bar size before ordering Bush Size: 26mmWeight: 304

Name: Front Anti Roll Bar Bush 26mmProduct Notes: Fits non-CSL M3 only. Please check Anti roll bar size before ordering Bush Size: 26mmWeight: 304

Name: Front Anti Roll Bar Bush 30.8mm Product Notes: Fits CSL models only. Please check Anti roll bar size before ordering Bush Size: 30.8mmWeight: 286

Name: Front Anti Roll Bar Bush 30.8mm Product Notes: Fits CSL models only. Please check Anti roll bar size before ordering Bush Size: 30.8mmWeight: 286

Name: Front Anti Roll Bar Bush 30.8mm Product Notes: Fits CSL models only. Please check Anti roll bar size before ordering Bush Size: 30.8mmWeight: 286

Name: Front Anti Roll Bar Mounting Bush 26.5mmProduct Notes: Please check Anti roll bar size before ordering Bush Size: 26.5mmWeight: 322

Name: Front Anti Roll Bar Mounting Bush 26.5mmProduct Notes: Bush Size: 26.5mmWeight: 322

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

Name: Front Anti Roll Bar Mounting Bush 27mmProduct Notes: Fits Cabriolet and Roadster models only. Please check Anti roll bar size before ordering Bush Size: 27mmWeight: 308

Name: Front Wishbone Rear Bush Product Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mm Weight: 502 Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions