A4 - S4 B9 (2016 - ON)

Name: Front Anti Roll Bar Bush 26.8mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 26.8 mmWeight: 148

Name: Front Anti Roll Bar Bush 26.8mmProduct Notes: Please check anti roll bar diameter before ordering. Bush Size: 26.8 mmWeight: 148

Name: Front Anti Roll Bar Link Bush 10mmProduct Notes: PFF3-913-10 fits vehicles with 170mm long anti roll bar links with a 10mm bolt. For 12mm bolts please use PFF3-913-12. Bush Size: 10mmWeight: 335

Name: Front Anti Roll Bar Link Bush 10mmProduct Notes: PFF3-913-10 fits vehicles with 170mm long anti roll bar links with a 10mm bolt. For 12mm bolts please use PFF3-913-12. Bush Size: 10mmWeight: 335

Name: Front Lower Control Arm Inner Bush Product Notes: PFF3-701 is a reinforced replacement bush that is 18% stiffer than the original bush to revitalise bush performance and restore steering precision. Weight: 727Fitting Instructions

Name: Front Lower Control Arm Inner Bush Product Notes: PFF3-701BLK is a reinforced replacement bush that is 18% stiffer than the original bush to revitalise bush performance and restore steering precision. Weight: 727Fitting Instructions

Name: Front Lower Radius Arm to Chassis Bush Product Notes: This part suits arms with a 75mm diameter bush. For arms with 65mm bushes, please use PFF3-802. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-702G. Bush Size: 75mmWeight: 2014Fitting Instructions

Name: Front Lower Radius Arm to Chassis Bush Product Notes: This part suits arms with a 75mm diameter bush. For arms with 65mm bushes, please use PFF3-802BLK. This is a replacement part that in our Black Series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster adjustable option, please use PFF3-702GBLK. Bush Size: 75mmWeight: 2014Fitting Instructions

Name: Front Lower Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This part suits arms with a 75mm diameter bush. For arms with 65mm bushes, please use PFF3-802G. This is a replacement part that in our road series application is 35% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702G provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702. Bush Size: 75mmWeight: 2131Fitting Instructions

Name: Front Lower Radius Arm to Chassis Bush Caster AdjustableProduct Notes: This part suits arms with a 75mm diameter bush. For arms with 65mm bushes, please use PFF3-802GBLK. This is a replacement part that in our road series application is over 100% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. PFF3-702GBLK provides +/- 0.5 caster offset that can be adjusted on the car for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF3-702BLK. Bush Size: 75mmWeight: 2131Fitting Instructions

Name: Front Upper Control Arm BushProduct Notes: Weight: 612Fitting Instructions

Name: Front Upper Control Arm BushProduct Notes: Weight: 612Fitting Instructions

Name: Front Upper Control Arm Bush - Camber AdjProduct Notes: Allows you to fine-tune the front camber/caster/toe. Perfect for dialing in the alignment, improving the handling and minimizing tyre wear. The offset sleeve can give up to +/- 0.3 of camber. Weight: 792Fitting Instructions

Name: Front Upper Control Arm Bush - Camber AdjProduct Notes: Allows you to fine-tune the front camber/caster/toe. Perfect for dialing in the alignment, improving the handling and minimizing tyre wear. The offset sleeve can give up to +/- 0.3 of camber. Weight: 792Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 122