Zafira Models

Name: Front Anti Roll Bar Mounting Bush 24mm (2 Piece)Product Notes: This replaces the original 2 piece design. For the single-piece design please use PFF66-503-*. For the Astra MK5 single-piece design, please use PFF80-1303-* Weight: 121

Name: Front Anti Roll Bar Mounting Bush 24mm (2 Piece)Product Notes: This replaces the original 2 piece design. For the single-piece design please use PFF66-503-*. For the Astra MK5 single-piece design, please use PFF80-1303-* Weight: 121

Name: Front Anti Roll Bar Mounting Bush 25mm (2 Piece)Product Notes: This replaces the original 2 piece design. For the single-piece design please use PFF66-503-*. For the Astra MK5 single-piece design, please use PFF80-1303-* Bush Size: 25mmWeight: 115

Name: Front Anti Roll Bar Mounting Bush 25mm (2 Piece)Product Notes: This replaces the original 2 piece design. For the single-piece design please use PFF66-503-*. For the Astra MK5 single-piece design, please use PFF80-1303-* Bush Size: 25mmWeight: 115

Name: Front Control Arm Front BushProduct Notes: Weight: 445

Name: Front Control Arm Front BushProduct Notes: Weight: 445

Name: Front Control Arm Rear BushProduct Notes: Weight: 823Fitting Instructions

Name: Front Control Arm Rear BushProduct Notes: Weight: 823Fitting Instructions

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol models. For diesel-engined vehicles use PFF80-1420R. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting InsertProduct Notes: Fits 1.8 and 2.0L petrol and diesel models. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Engine Mounting Insert (Diesel)Product Notes: Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for excessive movement of the engine and premature failure. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 382

Name: Front Lower Engine Mount Insert DieselProduct Notes: This in an insert that fits into and fills voids in the original rubber bush Weight: 265

Name: Front Lower Engine Mount Insert DieselProduct Notes: This in an insert that fits into and fills voids in the original rubber bush Weight: 265

Name: Front Lower Engine Mount Insert KitProduct Notes: This product is an insert for the original mount, it is not a full replacement bush. It is designed to fit the Z20LET Turbo 16v and Z22SE 16v engines. It will not fit vehicles fitted with automatic transmission. If fitting to any other engine, please check that our bush and the voiding on the original bush match. Weight: 213

Name: Front Lower Engine Mount Insert KitProduct Notes: This product is an insert for the original mount, it is not a full replacement bush. It is designed to fit the Z20LET Turbo 16v and Z22SE 16v engines. It will not fit vehicles fitted with automatic transmission. If fitting to any other engine, please check that our bush and the voiding on the original bush match. Weight: 213

Name: Front Lower Engine Mount Insert PetrolProduct Notes: PFF80-1320 fits engine types Z16LET, Z20LEL, Z20LER, Z20LEH, and Z22YH. This bush is an insert for the original mount, it is not a full replacement bush. Weight: 248

Name: Front Lower Engine Mount Insert PetrolProduct Notes: PFF80-1320 fits engine types Z16LET, Z20LEL, Z20LER, Z20LEH, and Z22YH. This bush is an insert for the original mount, it is not a full replacement bush. Weight: 248

Name: Front Subframe BushProduct Notes: Weight: 792Fitting Instructions

Name: Front Subframe BushProduct Notes: Weight: 792Fitting Instructions

Name: Front Wishbone Front BushProduct Notes: Weight: 336

Name: Front Wishbone Front BushProduct Notes: Weight: 336

Name: Front Wishbone Rear BushProduct Notes: Weight: 408

Name: Front Wishbone Rear BushProduct Notes: Weight: 408

Name: Gearbox Mount InsertProduct Notes: Fits MK4 Astra and Zafira A SRi/GSi models with engine codes Z16LET, Z20LET and Z22SE only. It also fits MK5 Astra and Zafira B engine types Z20LEL, R & H including VXR models. It also fits 1.7 (Z17DTx) & 1.9 CDTi 8v and 16v (Z19DTx) engines. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted, especially on diesel engines. Powerflex dealers and Vauxhall specialists, Courtenay Sport have produced their own comprehensive fitting guide for PFF80-1321.Click HERE for more information. Weight: 232

Name: Gearbox Mount InsertProduct Notes: Fits MK4 Astra and Zafira A SRi/GSi models with engine codes Z16LET, Z20LET and Z22SE only. It also fits MK5 Astra and Zafira B engine types Z20LEL, R & H including VXR models. It also fits 1.7 (Z17DTx) & 1.9 CDTi 8v and 16v (Z19DTx) engines. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted especially on diesel engines. Powerflex dealers and Vauxhall specialists, Courtenay Sport have produced their own comprehensive fitting guide for PFF80-1321.Click HERE for more information. Weight: 232

Name: Lower Radiator MountProduct Notes: Weight: 142

Name: Lower Radiator MountProduct Notes: Weight: 142

Name: PowerAlign Camber Bolt Kit (12mm x 60mm)Product Notes: Our PowerAlign camber bolts replace the original upper bolt on suspension struts with a two-bolt fixing to the knuckle, one positioned above the other, allowing up to +/- 1.75 degrees of adjustment. This kit contains 2 camber bolts, tab washers and nuts. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber Bolts. Bush Size: M12 x 60mmWeight: 189Fitting Instructions

Name: PowerAlign Wheel Mounting Guide PinProduct Notes: Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. The individual pins come supplied in a reusable twist tube and the 4-piece workshop kit is supplied with a steel storage case for pride of place in your toolbox.Simply thread the appropriate pin size into one of the bolt holes on the wheel hub. The wheel can then be lifted and placed on the guide pin, and easily slid into place on the hub; keeping the bolt holes aligned for other bolts to be inserted and tightened.This reduces the awkward and back-straining process of holding the wheel in place with one hand whilst lining up and threading in the first bolt; thus, reducing the risk, hassle, and strain of mounting wheels.Proven using simulated and real-world testing, the new mounting pins usehigh-strength CNC-machined AISI 303 Stainless Steel, some 50% stronger than plated mild steel, to ensure durability and resilience in a workshop environment, and are supplied with colour-coded 3D-printedprotective sleeves for ease of identificationandanodised 2011-T6 aluminium caps to absorb knocks and prevent damage to the wheel, unlike others on the market.Please clickhereto view all sizes available and fora wider-reaching application list in the form of anew user-friendly drop-down search function. Weight: 97

Name: Rear Beam Mounting BushProduct Notes: Fits rear beams with a 60mm diameter bush Bush Size: 60mmWeight: 1112

Name: Rear Beam Mounting BushProduct Notes: PFR80-1310 fits vehicles without Watt's linkage. For vehicles with Watt's linkage, please use PFR80-1410. Weight: 1247Fitting Instructions

Name: Rear Beam Mounting BushProduct Notes: PFR80-1310 fits vehicles without Watt's linkage. For vehicles with Watt's linkage, please use PFR80-1410. Weight: 1247Fitting Instructions