Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Hjem / Powerflex

Powerflex

Powerflex - Road Series

 

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger.  Send oss gjerne en mail info@koolart.no 

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.
Hovedbilde Gearbox Mount Front Bush Insert
Gearbox Mount Front Bush Insert

Name: Gearbox Mount Front Bush InsertProduct Notes: Fits European models only. This insert is made in our hardest Black 95A durometer material for heavily tuned vehicles and track use for maximum strength and response. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes and throttle application by stiffening and supporting the often perished rubber, a common failure on tuned vehicles. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 197

710.-

Hovedbilde Gearbox Mount Front Bush Insert
Gearbox Mount Front Bush Insert

Name: Gearbox Mount Front Bush InsertProduct Notes: Fits European models only. This insert is made in our Purple 80A durometer material for increased transmission mount longevity and performance on tuned engines. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes and throttle application by stiffening and supporting the often perished rubber, a common failure on tuned vehicles. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. Weight: 197

650.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount Insert Product Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 194Fitting Instructions

670.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount Insert Product Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 194Fitting Instructions

620.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: Fits MK4 Astra and Zafira A SRi/GSi models with engine codes Z16LET, Z20LET and Z22SE only. It also fits MK5 Astra and Zafira B engine types Z20LEL, R & H including VXR models. It also fits 1.7 (Z17DTx) & 1.9 CDTi 8v and 16v (Z19DTx) engines. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted, especially on diesel engines. Powerflex dealers and Vauxhall specialists, Courtenay Sport have produced their own comprehensive fitting guide for PFF80-1321.Click HERE for more information. Weight: 232

540.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: Fits MK4 Astra and Zafira A SRi/GSi models with engine codes Z16LET, Z20LET and Z22SE only. It also fits MK5 Astra and Zafira B engine types Z20LEL, R & H including VXR models. It also fits 1.7 (Z17DTx) & 1.9 CDTi 8v and 16v (Z19DTx) engines. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted especially on diesel engines. Powerflex dealers and Vauxhall specialists, Courtenay Sport have produced their own comprehensive fitting guide for PFF80-1321.Click HERE for more information. Weight: 232

600.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: This bush only fits European Sport models. This is an insert and fits into the voids of the original bush, it does not replace the complete bush. PFF73-421 fits into the voids on the original bush, please check your bush has the same voids as the original below.Weight: 166

630.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: This bush only fits European Sport models. This is an insert and fits into the voids of the original bush, it does not replace the complete bush. PFF73-421 fits into the voiding of the bush, please check your voiding is correct as below.Weight: 166

570.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: Made from our Yellow 70A material and bespoke design to significantly reduce engine movement and improve power delivery and driving feel. Weight: 133Fitting Instructions

510.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount Insert Product Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Fits ST models only. Weight: 206Fitting Instructions

650.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Fits ST models only. Weight: 206Fitting Instructions

590.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 254Fitting Instructions

410.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount Insert Product Notes: This part fits as an insert for the Gearbox Mount. The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. This provides a cost-effective way of improving engine stability, gear shifting, power delivery, and vehicle handling without the increased NVH associated with more expensive full replacement aftermarket engine mounts. Weight: 254Fitting Instructions

450.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: PFF85-1823 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821 Upper Engine Mount Insert and PFF85-1822 Lower Engine Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1823R. Weight: 72Fitting Instructions

520.-

Hovedbilde Gearbox Mount Insert
Gearbox Mount Insert

Name: Gearbox Mount InsertProduct Notes: PFF85-1823BLK acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821BLK Upper Engine Mount Insert and PFF85-1822BLK Upper Engine Mount Insert. Weight: 72Fitting Instructions

580.-

Hovedbilde Gearbox Mount Insert (Diesel)
Gearbox Mount Insert (Diesel)

Name: Gearbox Mount Insert (Diesel)Product Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 194Fitting Instructions

620.-

Hovedbilde Gearbox Mount Insert, 3 Cylinder & Diesel
Gearbox Mount Insert, 3 Cylinder & Diesel

Name: Gearbox Mount Insert, 3 Cylinder & Diesel Product Notes: PFF85-1823R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1821R Upper Engine Mount Insert and PFF85-1822R Upper Engine Mount Insert. Weight: 72Fitting Instructions

520.-

Hovedbilde Gearbox Mount Rear Insert Kit
Gearbox Mount Rear Insert Kit

Name: Gearbox Mount Rear Insert KitProduct Notes: Fits models from 1963-1993 using a hydraulic clutch. The buffer washers sit between the bush and gearbox cross-member area once our insert has been installed. Weight: 237Fitting Instructions

680.-

Hovedbilde Gearbox Mount Rear Insert Kit
Gearbox Mount Rear Insert Kit

Name: Gearbox Mount Rear Insert KitProduct Notes: Fits models from 1963-1993 using a hydraulic clutch. The buffer washers sit between the bush and gearbox cross-member area once our insert has been installed. Weight: 237Fitting Instructions

680.-

Hovedbilde Gearbox Mounting Bush
Gearbox Mounting Bush

Name: Gearbox Mounting BushProduct Notes: PFR85-1015 fits all petrol models except automatic transmissions and 2.1 petrol engines. Use PFR85-1016 for diesel, automatic and 1.9DG / 2.1 petrol-engined models. Weight: 424Fitting Instructions

640.-

Hovedbilde Gearbox Mounting Bush
Gearbox Mounting Bush

Name: Gearbox Mounting BushProduct Notes: PFR85-1015 fits all petrol models except automatic transmissions and 2.1 petrol engines. Use PFR85-1016 for diesel, automatic and 1.9DG / 2.1 petrol-engined models. Weight: 424Fitting Instructions

640.-

Hovedbilde Gearbox Mounting Bush
Gearbox Mounting Bush

Name: Gearbox Mounting BushProduct Notes: PFR85-1016 fits all diesel, automatic and 1.9DG / 2.1 petrol-engined models. Use PFR85-1015 for all other petrol models. Weight: 670

880.-

Hovedbilde Gearbox Mounting Bush
Gearbox Mounting Bush

Name: Gearbox Mounting BushProduct Notes: PFR85-1016 fits all diesel, automatic and 1.9DG / 2.1 petrol-engined models. Use PFR85-1015 for all other petrol models. Weight: 670

880.-

Hovedbilde Gearbox Mounting Bush Insert
Gearbox Mounting Bush Insert

Name: Gearbox Mounting Bush InsertProduct Notes: This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration. Weight: 122Fitting Instructions

510.-

Viser 2625 til 2656 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

  • Bedre stabilitet og styrerespons
  • Redusert slark i understell og oppheng
  • Lengre levetid enn originale gummiforinger
  • Mer presis og sportslig kjørefølelse
  • Motstandsdyktig mot slitasje og deformasjon
  • Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

Kontakt info

info@koolart.no
Telefon 40204030 M-F 10.00-16.00

Koolart John Martin Sandvik
Evjetun 6
3470 Slemmestad Norge

Info
Kundeservice

Nyhetsbrev

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png

Velkommen til Koolart Nettbutikk!

Vi tilbyr et bredt utvalg av bilutstyr som felger, dekk, ekstralys, bil- og båtsystemer, samt heve- og senkesett. I vårt eget verksted kan vi montere alt fra lys til lydsystemer, med produkter fra de mest anerkjente merkene.

Hos Koolart får du både produkter av høy kvalitet og profesjonell montering. Besøk oss, og la oss hjelpe deg med å tilpasse bilen eller båten din akkurat slik du ønsker!

 

Føl oss på sosiale medier

Følg oss på facebook koolart.no Følg oss på instagram

Dette nettstedet bruker informasjonskapsler for å fungere korrekt, analysere trafikk, personalisering av annonser og annonsering.
Drevet av Powered by Mystore
Juster innstillingene