Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: Designed around our unique on-car adjustable Nylon/Polyurethane ball-joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.75 of caster adjustment with a supplied spanner to assist the fine-tuning of the cars wheel geometry. Optional washers are included to add anti-lift geometry, improving front wheel grip under acceleration. Fitting this bush may result in a small amount of camber change, so fitting PFF26-101G Front Wishbone Front Bush Camber Adjustable is recommended to neutralise or improve any camber change. Weight: 1404Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: PFF69-505G is a low compliance ball and socket bush design engineered to provide Anti-Lift with on-car adjustment giving +/-0.33 degrees of caster change, improved traction, and reduced understeer. Weight: 996

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: PFF69-505G is a low compliance ball and socket bush design engineered to provide Anti-Lift with on-car adjustment giving +/-0.33 degrees of caster change, improved traction, and reduced understeer. Weight: 996Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: PFF69-902G is designed to replace the front lower control arm rear bush and is engineered to provide. 1) Revised front ANTI-LIFT geometry. 2) On-car CASTER adjustment giving +/-0.33 degrees of adjustment. 3) Improved front traction and reduced understeer. 4) Low compliance, spherical PU ball design Weight: 958Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: PFF69-902G is designed to replace the front lower control arm rear bush and is engineered to provide. 1) Revised front ANTI-LIFT geometry. 2) On-car CASTER adjustment giving +/-0.33 degrees of adjustment. 3) Improved front traction and reduced understeer. 4) Low compliance, spherical PU ball design. Weight: 958Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: This part provides +/- 0.33 degrees of on-car caster adjustment combined with an additional 6mm anti-lift offset. This bush is designed for use on standard travel suspension. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment. Weight: 1147Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Adjustable Product Notes: This part provides +/- 0.33 degrees of on-car caster adjustment combined with an additional 6mm anti-lift offset. This bush is designed for use on standard travel suspension. Suitable for Road and Black Series applications. Using aBlack 95A durometerball moulded toan all-new offset stainless steel sleeve andmachined nylon cups,this new and improved design maximises performance and articulation whileretainingthe benefitof on-car adjustability.All come pre-assembled with the ball and cups encapsulated within a plated metal outer shell secured by snap-rings and now include a 27mm spanner for adjustment.Weight: 1147Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1802G is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1802Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1802G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Purple Shore 80A Road Series material, PFF19-1802G is 10% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 85% stiffer than the original for those looking for a Track/Competition option. Weight: 3464Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1002G adds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1002Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1002G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Black Shore 80A Black Series material, PFF19-1002G is 85% stiffer than the original rubber bush for those looking for a Track/Competition option, whilst our Purple Shore 95A Road Series material is 10% stiffer than the original bush. Weight: 2580Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster Offset Product Notes: PFF19-1002G adds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1002Gadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1002G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Purple Shore 80A Road Series material, PFF19-1002G is 10% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 85% stiffer than the original for those looking for a Track/Competition option. Weight: 2580Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF19-1802GBLK is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. It will not fit later C-Max and Mk3 Focus models using aluminium front wishbones. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part provides anti-lift and caster offset to improve handling characteristics and has been proven and tested on road and track.PFF19-1802GBLKadds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater stability. The increased caster angle produces more weight and detail to the steering which is vital to driver confidence, allowing your Focus to corner with more urgency, significantly improved grip and reduced understeer.Starting out as a 6082 T6 (heat treated) solid billet of aluminium, our CNC machining centre and 4th axis shape the material into our unique design which is then hard black anodized, followed by an engraving process. By machining from a solid billet, we ensure our part has the best strength to weight ratio and looks great too. PFF19-1802G ships with CNC machined stainless steel-steel thrust washers to enhance braking stability.In our Black Shore 80A Black Series material, PFF19-1802G is 85% stiffer than the original rubber bush for those looking for a Track/Competition option, whilst our Purple Shore 95A Road Series material is 10% stiffer than the original bush. Weight: 3464Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1900Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1925Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G-5 is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1925Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF85-502G is a low-resistance polyurethane bush and CNC machined bracket combination providing Anti-Lift and 1 of caster offset. Designed to improve steering precision and braking stability, the revised Anti-Lift and caster geometry provides extra grip and reduced understeer. It is designed to complement PFF85-501G Front Wishbone Front Bush to provide +/- 0.5 degrees of camber adjustment. Weight: 1798Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF25-1002G Front Wishbone Rear Bush Anti-Lift & Caster Offset kit is designed to fit the pressed-steel arms on the non-R models to not only restore driver feel and steering precision, but also provide anti-lift geometry, +0.5 of caster, and an increase in stiffness over OE parts. Using a two-piece dual durometer bush (Purple 80Aand Black 95A) and an in-house CNC machined bracket, this product is perfect for enhancing both the dynamic ability of your vehicle and your connection to the road. PFF25-1002G increases stiffness over OE rubber bushes by 40% in our Road Series Purple 80A and 95% with PFF25-1002GBLK Black Series 95A for Track/Competition use.Increasing the caster angle of the front axle will give a weightier steering feel, improved straight-line stability and increased in-corner camber gain, while anti-lift helps reduce front-end lift during acceleration, improving traction and cornering grip. Weight: 0Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: The FK8 and FL5 Honda Civic Type R are truly great cars, some would argue the finest hot hatchbacks produced, and despite often being pitched against more powerful and costly opposition, they consistently punch above their weight. So, how does one improve on that I hear you say...well, fast front-heavy FWD vehicles all suffer the same problem - understeer due to front-end weight transfer and lift during acceleration. Manufacturers reduce this with limited-slip diffs but excessive deflection in worn rubber suspension bushes, specifically the front wishbone bushes as they age, can worsen this and promote unwanted reactions such as imprecise steering, braking instability and reduced traction including wheel-hop, problems that will no doubt take the sharp edge off what is usually a razor-sharp track weapon. PFF25-1102GBLK Front Wishbone Rear Bush Anti-Lift Kit combines a two-piece Black 95A bush with an in-house CNC-machined bracket providing anti-lift, +0.5 deg of caster adjustment and a mighty 300% increase in stiffness over OE. Weight: 2796Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: The FK8 and FL5 Honda Civic Type R are truly great cars, some would argue the finest hot hatchbacks produced, and despite often being pitched against more powerful and costly opposition, they consistently punch above their weight. So, how does one improve on that I hear you say...well, fast front-heavy FWD vehicles all suffer the same problem - understeer due to front-end weight transfer and lift during acceleration. Manufacturers reduce this with limited-slip diffs but excessive deflection in worn rubber suspension bushes, specifically the front wishbone bushes as they age, can worsen this and promote unwanted reactions such as imprecise steering, braking instability and reduced traction including wheel-hop, problems that will no doubt take the sharp edge off what is usually a razor-sharp track weapon. PFF25-1102G Front Wishbone Rear Bush Anti-Lift Kit combines a two-piece dual durometer (Purple 80A/Black 95A) bush with an in-house CNC-machined bracket providing anti-lift, +0.5 deg of caster adjustment and a mighty 300% increase in stiffness over OE. Weight: 2976Fitting Instructions

Name: Front Wishbone Rear Bush Anti-Lift & Caster OffsetProduct Notes: PFF25-1002G Front Wishbone Rear Bush Anti-Lift & Caster Offset kit is designed to fit the pressed-steel arms on the non-R models to not only restore driver feel and steering precision, but also provide anti-lift geometry, +0.5 of caster, and an increase in stiffness over OE parts. Using a two-piece dual durometer bush (Purple 80Aand Black 95A) and an in-house CNC machined bracket, this product is perfect for enhancing both the dynamic ability of your vehicle and your connection to the road.PFF25-1002G increases stiffness over OE rubber bushes by 40% in our Road Series Purple 80A and 95% with PFF25-1002GBLK Black Series 95A for Track/Competition use. Weight: 0Fitting Instructions

Name: Front Wishbone Rear Bush Caster AdjustableProduct Notes: PFF19-2202GBLK Front Arm Rear Bush Caster Adjust has been designed around our unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.5-1.0 of caster adjustment with the supplied spanner, to assist the fine-tuning of the side-to-side caster settings. Vertical stiffness is increased by 250% over standard rubber. Weight: 1170Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF19-803G is a CNC machined aluminium mount and polyurethane bush to provide 0.6 degrees of positive caster offset for improved handling. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part providescaster offset to improve handling characteristics and has been proven and tested on road and track. PFF19-803G Front Wishbone Rear Bush Caster Offsetis aCNC-machined Aluminium mount with Polyurethane bush providing approximately 0.6deg of caster offset. This improves camber gain in cornering without compromising straight line traction.In our Black Shore 80A Black Series material, PFF19-1002G is 270% stiffer than the original rubber bush for those looking for a Track/Competition option, whilst our Purple Shore 95A Road Series material is 55% stiffer than the original bush. Weight: 1200

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF19-803G is a CNC machined aluminium mount and polyurethane bush to provide 0.6 degrees of positive caster offset for improved handling. Focus ST and RS owners are all too familiar with the commonly reported torque steer effect of their vehicles. Our new part providescaster offset to improve handling characteristics and has been proven and tested on road and track. PFF19-803G Front Wishbone Rear Bush Caster Offsetis aCNC-machined Aluminium mount with Polyurethane bush providing approximately 0.6deg of caster offset. This improves camber gain in cornering without compromising straight line traction.In our Purple Shore 80A Road Series material, PFF19-803G is 55% stiffer than the original rubber bush, whilst our Black Series Shore 95A material is 270% stiffer than the original for those looking for a Track/Competition option. Weight: 1200Fitting Instructions

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF19-1102G Front Wishbone Rear Bush Caster Offset is a CNC-machined Aluminium mount with an 80A durometer polyurethane bush providing approx. 1 of caster offset to improve in-corner camber gain without compromising straight-line traction as proven and tested on road and track. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complementthe sporty spirit of the Mk6 ST, and with PFF19-1102G, we have combined a precision CNC-machined Aluminium bracket with our signature Polyurethane materials to provide an even more engaging driving experience.Our custom-geometry front wishbone bracket provides 1 increase in caster to sharpen up turn-in characteristics and dynamic camber, giving the front-end of your Fiesta a boost in responsiveness and improving mid-corner grip, without compromising straight line acceleration or tyre wear.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1102G bracket uses our signature Polyurethane to reduce slop in the wishbone during acceleration and braking, with the Purple 80A Road Series bush being 35% stiffer than the OE rubber bush, and the 95A Black Series being a huge 80% stiffer.Along with PFF19-1102G, we also makePFF19-1101G - Front Wishbone Front Bush With Camber Adjustment; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your build. Weight: 1240Fitting Instructions

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF19-1102G Front Wishbone Rear Bush Caster Offset is a CNC-machined Aluminium mount with a 95A durometer polyurethane bush providing approx. 1 of caster offset to improve in-corner camber gain without compromising straight-line traction as proven and tested on road and track. The Mk6 Ford Fiesta ST150 continues to be a popular choice among young drivers and track-dayers alike, and with it's 2.0L engine and sporty handling, it's not difficult to see why. Powerflex's products perfectly complement the sporty spirit of the Mk6 ST, and with PFF19-1102G, we have combined a precision CNC-machined Aluminium bracket with our signature Polyurethane materials to provide an even more engaging driving experience.Our custom-geometry front wishbone bracket provides 1 increase in caster to sharpen up turn-in characteristics and dynamic camber, giving the front-end of your Fiesta a boost in responsiveness and improving mid-corner grip, without compromising straight line acceleration or tyre wear.As well as a improvement in suspension geometry for sports and performance driving, the PFF19-1102G bracket uses our signature Polyurethane to reduce slop in the wishbone during acceleration and braking, with the Purple 80A Road Series bush being 35% stiffer than the OE rubber bush, and the 95A Black Series being a huge 80% stiffer.Along with PFF19-1102G, we also make PFF19-1101G - Front Wishbone Front Bush With Camber Adjustment; combine them together to activate highly tuneable front axle geometry, so you can dial-in your handling perfectly for your build. Weight: 1240Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF46-1002G is a 3-pc design allowing for increased articulation of the front wishbone and provides +/- 0.5 caster offset . For a non-offset version of this bush please use PFF46-1002. Weight: 816Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF46-1002G is a 3-pc design allowing for increased articulation of the front wishbone and provides +/- 0.5 caster offset . For a non-offset version of this bush please use PFF46-1002. Weight: 816Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. Aimed at offering greater precision with improved geometry for people wanting the very best from their vehicle. This new part, fitted to the rear of the front wishbone has a hard-anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. In our Road Series Purple material, stiffness is boosted by almost 100% over the original part, whilst our Black Series part increases stiffness by another 100%. Weight: 723Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF1-1002G is a replacment bush that in our Black Series material is 168% stiffer than the original rubber bush for Track/Competition use and gives a fixed 5mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF1-1002BLK. Weight: 674Fitting Instructions

Name: Front Wishbone Rear Bush Caster OffsetProduct Notes: PFF1-1002G is a replacement bush that in our purple Road Series material is 23% stiffer than the original rubber bush and gives a fixed 5mm offset to provide +/- 0.5 caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a non-adjustable version of this bush please use PFF1-1002. Weight: 674Fitting Instructions

Name: Front Wishbone Rear Bush Caster Offset Product Notes: PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. A2 models fitting advised for aluminium arms only and will not fit cast steel arms on these models. PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. Aimed at offering greater precision with improved geometry for people wanting the very best from their vehicle. This new part, fitted to the rear of the front wishbone has a hard-anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. In our Road Series Purple material, stiffness is boosted by almost 100% over the original part, whilst our Black Series part increases stiffness by another 100%. Weight: 723Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: This part replaces original bush and also fits M3 vehicles that have a thicker wishbone. PFF5-5601M3 is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601-60 is a high-performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with a 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions