Powerflex

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger. Send oss gjerne en mail info@koolart.no

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 1033Fitting Instructions

760.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: PFF19-2302 allows free rotation of the wishbone to eliminate torsional twist of the bush, the common cause for failure with the OE rubber bush. Weight: 470Fitting Instructions

570.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 342

560.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 342

560.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 174

370.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: Weight: 944Fitting Instructions

1020.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: Weight: 944Fitting Instructions

930.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 174

410.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 174

370.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: PFF46-1002 is a 3-pc design allowing for increased articulation of the front wishbone. For a caster offset version of this bush please use PFF46-1002G. Weight: 816Fitting Instructions

930.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: PFF46-1002 is a 3-pc design allowing for increased articulation of the front wishbone. For a caster offset version of this bush please use PFF46-1002G. Weight: 816Fitting Instructions

840.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 803Fitting Instructions

840.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 803Fitting Instructions

930.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 803Fitting Instructions

840.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Use this bush to replace the front arm rear bush if it is D shaped, if the original bush is round use PFF57-203. Bush Size: D shapedWeight: 514

720.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Use this bush to replace the front arm rear bush if it is D shaped, if the original bush is round use PFF57-203. Bush Size: D shapedWeight: 514Fitting Instructions

660.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This bush fits cars with a round bush as standard. If it has a D shaped bush with a flat use PFF57-303. Weight: 488Fitting Instructions

640.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This bush fits cars with a round bush as standard. If it has a D shaped bush with a flat use PFF57-303. Weight: 488Fitting Instructions

640.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This bush fits cars with a round bush as standard. If it has a D shaped bush with a flat use PFF57-303. Weight: 488Fitting Instructions

640.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 204

460.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: Weight: 204

500.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 204

460.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mm Weight: 502 Fitting Instructions

690.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

590.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits models with 60mm housing - check diameter before ordering Bush Size: 60mmWeight: 368Fitting Instructions

650.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Fits 66mm housing as fitted to E46 after approx. Feb 2001 and all Z4. For E46 before approx Feb 2001, you will require the 60mm version, PFF5-4601-60. If your car was built around Feb 2001, please measure prior to ordering. Bush Size: 66mmWeight: 502Fitting Instructions

760.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This fits the 4WD 'Xi/XD' models only. They are designed to fit the 60mm Aluminium housing Bush Size: 60mmWeight: 308Fitting Instructions

680.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This part is not suitable for cars being used on track or for competition. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if this is the intended use for your vehicle. Bush Size: 60mmWeight: 528Fitting Instructions

650.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This part is only suitable for fast road or light track use. Please use PFF5-5601M3 or PFF5-5601GM3BLK (if more caster is required) if your vehicle is heavily modified and is used for heavy track use, or for competition. Bush Size: 60mmWeight: 528Fitting Instructions

710.-

Front Wishbone Rear Bush

650.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: This fits the 4WD 'Xi/XD' models only. They are designed to fit the 60mm Aluminium housing Bush Size: 60mmWeight: 308Fitting Instructions

620.-

Front Wishbone Rear Bush

Name: Front Wishbone Rear BushProduct Notes: Weight: 507Fitting Instructions

620.-

Viser 2433 til 2464 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

Bedre stabilitet og styrerespons
Redusert slark i understell og oppheng
Lengre levetid enn originale gummiforinger
Mer presis og sportslig kjørefølelse
Motstandsdyktig mot slitasje og deformasjon
Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Powerflex

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Fordeler med Powerflex foringer:

Kontakt info

Info

Kundeservice

Totalt:

Powerflex

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Fordeler med Powerflex foringer:

Totalt:

DB9

100 - 200 (1976 - 1991)

80 - 90 - inc S2-RS2 & Quattro (1976 - 2000)

A1 - S1 (2010 on)

A3 - S3 - RS3

A4 - S4 - RS4

A5 - S5 - RS5

A6 - S6 - RS6

A7 - S7 - RS7

A8 - S8

Q2 (2017 - On)

Q3 - RSQ3

Q5 - SQ5

Q7

TT Models

02 Series

1 Series

2 Series

3 Series

4 Series

5 Series

6 Series

7 Series

8 Series

X Series

Z Series

7 (DeDion with Watts Linkage)

7 (DeDion without Watts Linkage)

Berlingo Models

C3 Models

C4 Models

C5 Models

DS5 Models

500 Models

Panda

Punto

C-Max Models

Escort Models

Fiesta Models

Focus Models

Galaxy Models

KA Models

Kuga Models

Mondeo Models

Puma

Sierra Models

Transit

Civic Models

CR-V Models

CR-X Models

Integra Models

Jazz - Fit Models

Accent Models

Coupe Models

Elantra Models

i10 Models

i20 Models

i30 Models

Santa Fe Models

Sonata Models

Tucson - iX35 Models

Veloster Models

Cee'd-Proceed-XCeed Models

Cerato Models

Soul Models

Sportage Models

Defender

Discovery

Freelander

Range Rover inc Sport, Evoque & Classic

Elise (1996 - 2021)

Exige (2000 - 2021)

Mazda 3

MX-5, Miata, Eunos

C-CLASS

CLK