Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Hjem / Powerflex

Powerflex

Powerflex - Road Series

 

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger.  Send oss gjerne en mail info@koolart.no 

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.
Hovedbilde Front Wishbone Rear Bush
Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: PFF12-702 is a three-part polyurethane sliding bush design for increased articulation, held securely between two CNC machined stainless steel sleeves. Weight: 841Fitting Instructions

1050.-

Hovedbilde Front Wishbone Rear Bush
Front Wishbone Rear Bush

Name: Front Wishbone Rear Bush Product Notes: PFF12-702 is a three-part polyurethane sliding bush design for increased articulation, held securely between two CNC machined stainless steel sleeves. Weight: 841Fitting Instructions

1160.-

Hovedbilde Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)
Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)

Name: Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer)Product Notes: PFF5-3603BLK Front Wishbone Rear Bush (E46 Hybrid, Aluminium Outer) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. PFF5-3603BLK uses a CNC-machined Aluminium outer shell to increase stiffness and durability further for the most demanding high-stress conditions. Weight: 596Fitting Instructions

1000.-

Hovedbilde Front Wishbone Rear Bush (E46 Hybrid)
Front Wishbone Rear Bush (E46 Hybrid)

Name: Front Wishbone Rear Bush (E46 Hybrid)Product Notes: PFF5-3601BLK Front Wishbone Rear Bush (E46 Hybrid) is a two-piece hybrid design bush for free-rotation made using our Black 95A durometer material inner and outer bush, that combines the inner hexagonal profile of the E46 aluminium wishbone and the outer dimensions of the E30/E36 'Lollipop' mounting brackets. Weight: 386Fitting Instructions

670.-

Hovedbilde Front Wishbone Rear Bush (Track/Race)
Front Wishbone Rear Bush (Track/Race)

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

1540.-

Hovedbilde Front Wishbone Rear Bush (Track/Race)
Front Wishbone Rear Bush (Track/Race)

Name: Front Wishbone Rear Bush (Track/Race)Product Notes: This is a rose-jointed bush with PU inserts. It is recommended for Track/Race use. Weight: 851Fitting Instructions

1540.-

Hovedbilde Front Wishbone Rear Bush & Bracket
Front Wishbone Rear Bush & Bracket

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

1220.-

Hovedbilde Front Wishbone Rear Bush & Bracket
Front Wishbone Rear Bush & Bracket

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-4601 Front Wishbone Rear Bush & Bracket fits BMW E46 and Z4, excluding M3, and uses our PFF5-4601 bush, covering both 60 and 66mm size options. No more guessing or measuring required! A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality supplied brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Bush Size: 66mmWeight: 502Fitting Instructions

1110.-

Hovedbilde Front Wishbone Rear Bush & Bracket
Front Wishbone Rear Bush & Bracket

Name: Front Wishbone Rear Bush & Bracket Product Notes: PFF5K-101 Front Wishbone Rear Bush & Bracket fits Mini Gen 1 R50/R53 and uses our existing PFF5-101 bush. A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners, but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality brackets, they simply require fitting onto the arm and bolting into position, saving both time and money. Weight: 4100Fitting Instructions

1460.-

Hovedbilde Front Wishbone Rear Bush & Bracket
Front Wishbone Rear Bush & Bracket

Name: Front Wishbone Rear Bush & Bracket Product Notes: PFF5K-201 Front Wishbone Rear Bush & Bracket fits Mini Gen 2 R56/R57 and uses our existing PFF5-101 bush. A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Weight: 4100Fitting Instructions

1500.-

Hovedbilde Front Wishbone Rear Bush & Bracket
Front Wishbone Rear Bush & Bracket

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-201 Front Wishbone Rear Bush & Bracket fits Mini Gen 2 R56/R57 and uses our existing PFF5-101 bush. A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Weight: 4100Fitting Instructions

1650.-

Hovedbilde Front Wishbone Rear Bush & Bracket
Front Wishbone Rear Bush & Bracket

Name: Front Wishbone Rear Bush & BracketProduct Notes: PFF5K-101 Front Wishbone Rear Bush & Bracket fits Mini Gen 1 R50/R53 and uses our existing PFF5-101 bush. A lasting, better-performing polyurethane bush alternative, like Powerflex, has always been a popular upgrade for owners but whilst our bushes are very easy to fit, sometimes removing the original bushes from the OE housing brackets can be difficult, especially for those with limited access to pressing or pulling tools. Pre-installed in quality brackets, they simply require fitting onto the arm and bolting into position saving both time and money. Weight: 4100Fitting Instructions

1460.-

Hovedbilde Front Wishbone Rear Bush 46.5mm
Front Wishbone Rear Bush 46.5mm

Name: Front Wishbone Rear Bush 46.5mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46.5mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47.4mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 46.5mmWeight: 539Fitting Instructions

670.-

Hovedbilde Front Wishbone Rear Bush 46.5mm
Front Wishbone Rear Bush 46.5mm

Name: Front Wishbone Rear Bush 46.5mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46.5mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47.4mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 46.5mmWeight: 539Fitting Instructions

670.-

Hovedbilde Front Wishbone Rear Bush 47mm
Front Wishbone Rear Bush 47mm

Name: Front Wishbone Rear Bush 47mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 47mmWeight: 569Fitting Instructions

710.-

Hovedbilde Front Wishbone Rear Bush 47mm
Front Wishbone Rear Bush 47mm

Name: Front Wishbone Rear Bush 47mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 47mmWeight: 569Fitting Instructions

710.-

Hovedbilde Front Wishbone Rear Bush 47mm
Front Wishbone Rear Bush 47mm

Name: Front Wishbone Rear Bush 47mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200 models. Bush Size: 47mmWeight: 569Fitting Instructions

710.-

Hovedbilde Front Wishbone Rear Bush 52mm
Front Wishbone Rear Bush 52mm

Name: Front Wishbone Rear Bush 52mmProduct Notes: PFF66-201 has 52mm O/D at the rear of the bush and fits pre year 2000 models. Bush Size: 52mmWeight: 610

620.-

Hovedbilde Front Wishbone Rear Bush 52mm
Front Wishbone Rear Bush 52mm

Name: Front Wishbone Rear Bush 52mmProduct Notes: PFF66-201 has 52mm O/D at the rear of the bush and fits pre year 2000 models. Bush Size: 52mmWeight: 610

690.-

Hovedbilde Front Wishbone Rear Bush 52mm
Front Wishbone Rear Bush 52mm

Name: Front Wishbone Rear Bush 52mmProduct Notes: PFF66-201 has 52mm O/D at the rear of the bush and fits pre year 2000 models. Bush Size: 52mmWeight: 610

620.-

Hovedbilde Front Wishbone Rear Bush 54mm
Front Wishbone Rear Bush 54mm

Name: Front Wishbone Rear Bush 54mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Bush Size: 54mmWeight: 709Fitting Instructions

740.-

Hovedbilde Front Wishbone Rear Bush 54mm
Front Wishbone Rear Bush 54mm

Name: Front Wishbone Rear Bush 54mmProduct Notes: Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Bush Size: 54mmWeight: 709Fitting Instructions

740.-

Hovedbilde Front Wishbone Rear Bush 60mm
Front Wishbone Rear Bush 60mm

Name: Front Wishbone Rear Bush 60mmProduct Notes: Ford have changed the diameter of the bushes used in the front wishbones several times. Please measure the original bushes to select the correct bushes. PFF19-601 is 46mm diameter. PFF19-602 is 54mm diameter. PFF19-901 is 47mm diameter. PFF19-902 is 60mm diameter. Bush Size: 60mmWeight: 856Fitting Instructions

1010.-

Hovedbilde Front Wishbone Rear Bush 62mm
Front Wishbone Rear Bush 62mm

Name: Front Wishbone Rear Bush 62mmProduct Notes: PFF66-205 is fitted on model year 2000 onwards. It has a 62mm O/D at the rear of the bush. Bush Size: 62mmWeight: 701

630.-

Hovedbilde Front Wishbone Rear Bush 62mm
Front Wishbone Rear Bush 62mm

Name: Front Wishbone Rear Bush 62mmProduct Notes: PFF66-205BLK is fitted on model year 2000 onwards. It has a 62mm O/D at the rear of the bush. Bush Size: 62mmWeight: 701

690.-

Hovedbilde Front Wishbone Rear Bush 62mm
Front Wishbone Rear Bush 62mm

Name: Front Wishbone Rear Bush 62mmProduct Notes: PFF66-205 is fitted on model year 2000 onwards. It has a 62mm O/D at the rear of the bush. Bush Size: 62mmWeight: 701

630.-

Hovedbilde Front Wishbone Rear Bush Anti-Lift & Caster Adjust
Front Wishbone Rear Bush Anti-Lift & Caster Adjust

Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: PFF69-502G is designed to replace the front lower control arm rear bush and is engineered to provide:-Revised front ANTI-LIFT geometryOn-car CASTER adjustment giving +/-0.33 degrees of adjustmentImproved front traction and reduced understeerLow compliance ball and socket bush design Weight: 948Fitting Instructions

1620.-

Hovedbilde Front Wishbone Rear Bush Anti-Lift & Caster Adjust
Front Wishbone Rear Bush Anti-Lift & Caster Adjust

Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: PFF69-502G is designed to replace the front lower control arm rear bush and is engineered to provide:-Revised front ANTI-LIFT geometryOn-car CASTER adjustment giving +/-0.33 degrees of adjustmentImproved front traction and reduced understeerLow compliance ball and socket bush designWeight: 948

1620.-

Hovedbilde Front Wishbone Rear Bush Anti-Lift & Caster Adjust
Front Wishbone Rear Bush Anti-Lift & Caster Adjust

Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: PFF76-902G Front Wishbone Rear Bush has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings and also includes 5mm anti-lift properties. Vertical stiffness is increased by 250% over standard rubber. PFF76-902G has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings. PFF76-902G also provides 5mm anti-lift properties.Vertical stiffness is increased by 250% over standard rubber. Weight: 1382Fitting Instructions

1600.-

Hovedbilde Front Wishbone Rear Bush Anti-Lift & Caster Adjust
Front Wishbone Rear Bush Anti-Lift & Caster Adjust

Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: PFF76-902G Front Wishbone Rear Bush has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings and also includes 5mm anti-lift properties. Vertical stiffness is increased by 250% over standard rubber. PFF76-902G has been designed aroundour unique on-car adjustable Nylon/Polyurethane Ball-Joint combination for more direct steering input and improved cornering and braking.The offset bore allows up to 0.5 of caster adjustment with the supplied spanner,to assist the fine-tuningof the side-to-side caster settings. PFF76-902G also provides 5mm anti-lift properties.Vertical stiffness is increased by 250% over standard rubber. Weight: 1382Fitting Instructions

1600.-

Hovedbilde Front Wishbone Rear Bush Anti-Lift & Caster Adjust
Front Wishbone Rear Bush Anti-Lift & Caster Adjust

Name: Front Wishbone Rear Bush Anti-Lift & Caster AdjustProduct Notes: Designed around our unique on-car adjustable Nylon/Polyurethane ball-joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.75 of caster adjustment with a supplied spanner to assist the fine-tuning of the cars wheel geometry. Optional washers are included to add anti-lift geometry, improving front wheel grip under acceleration. Fitting this bush may result in a small amount of camber change, so fitting PFF26-101G Front Wishbone Front Bush Camber Adjustable is recommended to neutralise or improve any camber change. Weight: 1404Fitting Instructions

1550.-

Viser 2497 til 2528 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

  • Bedre stabilitet og styrerespons
  • Redusert slark i understell og oppheng
  • Lengre levetid enn originale gummiforinger
  • Mer presis og sportslig kjørefølelse
  • Motstandsdyktig mot slitasje og deformasjon
  • Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

Kontakt info

info@koolart.no
Telefon 40204030 M-F 10.00-16.00

Koolart John Martin Sandvik
Evjetun 6
3470 Slemmestad Norge

Info
Kundeservice

Nyhetsbrev

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png

Velkommen til Koolart Nettbutikk!

Vi tilbyr et bredt utvalg av bilutstyr som felger, dekk, ekstralys, bil- og båtsystemer, samt heve- og senkesett. I vårt eget verksted kan vi montere alt fra lys til lydsystemer, med produkter fra de mest anerkjente merkene.

Hos Koolart får du både produkter av høy kvalitet og profesjonell montering. Besøk oss, og la oss hjelpe deg med å tilpasse bilen eller båten din akkurat slik du ønsker!

 

Føl oss på sosiale medier

Følg oss på facebook koolart.no Følg oss på instagram

Dette nettstedet bruker informasjonskapsler for å fungere korrekt, analysere trafikk, personalisering av annonser og annonsering.
Drevet av Powered by Mystore
Juster innstillingene