Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Hjem / Powerflex

Powerflex

Powerflex - Road Series

 

Der det skal være flere en 1 stk på bilen så er disse priset pr stk så her må en legge i handle vogn det antallet bilen trenger.  Send oss gjerne en mail info@koolart.no 

Hjulopphengsbøssinger er noen av de mest belastede komponentene som er montert på en bil. De utsettes for enorme belastninger og under de mest krevende forhold uten vedlikehold eller smøring.

Materialet de er produsert av er en gummiblanding som inneholder naturlige produkter som forringes med alderen. 
Den blir mykere og mer smidig, og motstår kreftene som utsettes for den mindre og mindre. Dermed tillater den mer og mer bevegelse av fjæringskomponenter og gir mindre og mindre kontroll over fjæringsgeometrien.

Dette fører igjen til akselerert dekkslitasje, ustabilitet i bremser og dårlig håndtering. Dette er den største grunnen til at du umiddelbart kan se forskjellen når du kjører en tre år gammel bil sammenlignet med en ny bil fra utstillingslokalet. 
Imidlertid vil selv nye biler dra nytte av POWERFLEX-bøssinger på grunn av den overlegne designen. 
De gir mye mer effektiv kontroll over fjæringskomponentene i mye større grad enn vanlige gummideler.

Med de teknologiske fremskrittene i dette materialet har det vært mulig å overvinne det vanlige problemet forbundet med hardere bøssinger, som er økt støy. 
Ved riktig konstruering av polyuretanblandingen kan bøssinger gjøres 25–30 % stivere enn nye gummideler, men med nøyaktig de samme støydempende egenskapene.

POWERFLEX-bøssinger gir mening.POWERFLEX for forbedret ytelse.POWERFLEX for økt sikkerhet.POWERFLEX for lengre dekklevetid.
Hovedbilde Front Wishbone Rear Bush, Aluminium Outer
Front Wishbone Rear Bush, Aluminium Outer

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601-60 is a high-performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

1200.-

Hovedbilde Front Wishbone Rear Bush, Aluminium Outer
Front Wishbone Rear Bush, Aluminium Outer

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601 is a high performance option to PFF5-4601, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 744Fitting Instructions

1200.-

Hovedbilde Front Wishbone Rear Bush, Aluminium Outer
Front Wishbone Rear Bush, Aluminium Outer

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: PFF5-5601 is a high-performance option to PFF5-4601 and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 744Fitting Instructions

1320.-

Hovedbilde Front Wishbone Rear Bush, Aluminium Outer
Front Wishbone Rear Bush, Aluminium Outer

Name: Front Wishbone Rear Bush, Aluminium OuterProduct Notes: This part fits into original bracket and fits M3 vehicles that have a thicker wishbone. PFF5-5601M3 is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 626Fitting Instructions

1200.-

Hovedbilde Front Wishbone Rear Bush, Aluminium Outer (Concentric)
Front Wishbone Rear Bush, Aluminium Outer (Concentric)

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

1140.-

Hovedbilde Front Wishbone Rear Bush, Aluminium Outer (Concentric)
Front Wishbone Rear Bush, Aluminium Outer (Concentric)

Name: Front Wishbone Rear Bush, Aluminium Outer (Concentric)Product Notes: PFF5-5301 includes a CNC-machined aluminium outer shell with a concentric bore for standard geometry alignment, and with the machined shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

1250.-

Hovedbilde Front Wishbone Rear Bush, Aluminium Outer Caster Offset
Front Wishbone Rear Bush, Aluminium Outer Caster Offset

Name: Front Wishbone Rear Bush, Aluminium Outer Caster OffsetProduct Notes: PFF5-5303 includes a CNC-machined aluminium outer shell with an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. By including the shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

1250.-

Hovedbilde Front Wishbone Rear Bush, Aluminium Outer Caster Offset
Front Wishbone Rear Bush, Aluminium Outer Caster Offset

Name: Front Wishbone Rear Bush, Aluminium Outer Caster OffsetProduct Notes: PFF5-5303 includes a CNC-machined aluminium outer shell with an eccentric offset bore, increasing caster by 6.5mm / 0.5deg, for better turn-in response and in-corner camber gain. By including the shell and reducing the amount of polyurethane material used, we have increased stiffness by a further 50% over PFF5-301 and PFF5-303, and a massive 250% over the standard OE rubber bush. The results are incredible, with minimal deflection under steering load and braking, whilst maintaining a balance of compliance and performance. Weight: 600Fitting Instructions

1140.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjustable
Front Wishbone Rear Bush, Caster Adjustable

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree. Weight: 726Fitting Instructions

1480.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjustable
Front Wishbone Rear Bush, Caster Adjustable

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: PU ball design comes built up, in a press fit capsule. On car adjustable bush, allowing caster adjustment of +/- 0.33 degree. Weight: 726Fitting Instructions

1480.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjustable
Front Wishbone Rear Bush, Caster Adjustable

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

1510.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjustable
Front Wishbone Rear Bush, Caster Adjustable

Name: Front Wishbone Rear Bush, Caster AdjustableProduct Notes: Using a Black 95A durometer ball moulded to an all-new offset stainless steel sleeve and machined nylon cups, this new and improved design maximises performance and articulation while retaining the benefit of on-car adjustability of caster by +/- 0.33 degs. Weight: 1154Fitting Instructions

1510.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjusted
Front Wishbone Rear Bush, Caster Adjusted

Name: Front Wishbone Rear Bush, Caster AdjustedProduct Notes: PFF5-201G offers additional +2 of caster and is a high performance option to PFF5-201. Aimed at offering greater precision with improved geometry for people wanting the very best from their Mini. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. Weight: 988Fitting Instructions

1410.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjusted
Front Wishbone Rear Bush, Caster Adjusted

Name: Front Wishbone Rear Bush, Caster AdjustedProduct Notes: PFF5-201G offers additional +2 of caster and is a high performance option to PFF5-201. Aimed at offering greater precision with improved geometry for people wanting the very best from their Mini. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are improved geometry when turning giving additional grip, steering control and feel with less movement in the arm under cornering and braking. Weight: 988Fitting Instructions

1550.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjusted
Front Wishbone Rear Bush, Caster Adjusted

Name: Front Wishbone Rear Bush, Caster AdjustedProduct Notes: PFF5-101GBLK offers an additional +2 of caster and is a high-performance option to PFF5-101 for people wanting the very best from their Mini. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low-friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are greater precision and optimised geometry when turning, improving grip, steering control and feel with less movement in the arm under cornering and braking. Weight: 988Fitting Instructions

1470.-

Hovedbilde Front Wishbone Rear Bush, Caster Adjusted
Front Wishbone Rear Bush, Caster Adjusted

Name: Front Wishbone Rear Bush, Caster AdjustedProduct Notes: PFF5-101G offers an additional +2 of caster and is a high-performance option to PFF5-101 for people wanting the very best from their Mini. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low-friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Additional caster angle will give more negative camber when cornering giving improved tyre to road contact. Results are greater precision and optimised geometry when turning, improving grip, steering control and feel with less movement in the arm under cornering and braking. Weight: 988Fitting Instructions

1340.-

Hovedbilde Front Wishbone Rear Bush, Caster Offset
Front Wishbone Rear Bush, Caster Offset

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Bush Size: 66mmWeight: 788Fitting Instructions

1320.-

Hovedbilde Front Wishbone Rear Bush, Caster Offset
Front Wishbone Rear Bush, Caster Offset

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601GM3 offers additional +0.5 of caster over PFF5-5601M3 and is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part Bush Size: 60mmWeight: 634Fitting Instructions

1200.-

Hovedbilde Front Wishbone Rear Bush, Caster Offset
Front Wishbone Rear Bush, Caster Offset

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601GM3 offers additional +0.5 of caster over PFF5-5601M3 and is a high performance option to PFF5-4601M3, and aimed at offering greater precision for people wanting the very best from their E46 M3. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. For the M3 models which have a thicker wishbone. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 634Fitting Instructions

1320.-

Hovedbilde Front Wishbone Rear Bush, Caster Offset
Front Wishbone Rear Bush, Caster Offset

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G-60 offers additional +0.33 of caster over PFF5-5601-60 and is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. Testing during the development of this bush has indicated stiffness gains of 190% compared with the original rubber bush. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Bush Size: 60mmWeight: 633Fitting Instructions

1320.-

Hovedbilde Front Wishbone Rear Bush, Caster Offset
Front Wishbone Rear Bush, Caster Offset

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G-60 offers additional +0.33 of caster over PFF5-5601-60 and is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part Bush Size: 60mmWeight: 633Fitting Instructions

1200.-

Hovedbilde Front Wishbone Rear Bush, Caster Offset
Front Wishbone Rear Bush, Caster Offset

Name: Front Wishbone Rear Bush, Caster OffsetProduct Notes: PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases stiffness by 28%, to give an 190% increase in stiffness over the original part Bush Size: 66mmWeight: 788Fitting Instructions

1200.-

Hovedbilde Front Wishbone Rear Bush, Pattern Arm
Front Wishbone Rear Bush, Pattern Arm

Name: Front Wishbone Rear Bush, Pattern Arm Product Notes: This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410 Bush Size: 21mm arm widthWeight: 519

590.-

Hovedbilde Front Wishbone Rear Bush, Pattern Arm
Front Wishbone Rear Bush, Pattern Arm

Name: Front Wishbone Rear Bush, Pattern Arm Product Notes: This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm. For genuine OE arms that measure 23mm in depth, please use PFF85-410BLK Bush Size: 21mm arm widthWeight: 519

650.-

Viser 2561 til 2592 (av 5504 produkter)

Powerflex foringer – bedre kjøreegenskaper og lengre levetid

Oppgrader bilen med kvalitetsforinger fra Powerflex – utviklet for deg som ønsker bedre respons, mer stabilitet og lengre holdbarhet enn originale gummiforinger. Powerflex polyuretanforinger gir redusert fleks i understell og oppheng, noe som forbedrer både styringsfølelse, veigrep og kjøreegenskaper.

Powerflex er kjent for høy kvalitet og produserer foringer til en rekke bilmodeller, både for gatebruk, sportslig kjøring og bane. Polyuretanmaterialet er betydelig mer slitesterkt enn tradisjonelle gummiforinger og tåler belastning, olje, salt og vær langt bedre.

Fordeler med Powerflex foringer:

  • Bedre stabilitet og styrerespons
  • Redusert slark i understell og oppheng
  • Lengre levetid enn originale gummiforinger
  • Mer presis og sportslig kjørefølelse
  • Motstandsdyktig mot slitasje og deformasjon
  • Enkel montering på mange modeller

Slitte originale foringer kan føre til dårligere kjøreegenskaper, unormal dekkslitasje og ustabil bil. Ved å montere Powerflex foringer får bilen et fastere og mer presist understell som gir bedre kontroll både på landevei og ved aktiv kjøring.

Vi tilbyr Powerflex foringer til en rekke bilmerker og modeller – blant annet bærearmsforinger, stabilisatorforinger, motorfester og komplette foringssett. Enten du bygger showbil, senket bil eller ønsker å forbedre originalfølelsen, er Powerflex et populært valg blant entusiaster og verksteder verden over.

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

Kontakt info

info@koolart.no
Telefon 40204030 M-F 10.00-16.00

Koolart John Martin Sandvik
Evjetun 6
3470 Slemmestad Norge

Info
Kundeservice

Nyhetsbrev

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png

Velkommen til Koolart Nettbutikk!

Vi tilbyr et bredt utvalg av bilutstyr som felger, dekk, ekstralys, bil- og båtsystemer, samt heve- og senkesett. I vårt eget verksted kan vi montere alt fra lys til lydsystemer, med produkter fra de mest anerkjente merkene.

Hos Koolart får du både produkter av høy kvalitet og profesjonell montering. Besøk oss, og la oss hjelpe deg med å tilpasse bilen eller båten din akkurat slik du ønsker!

 

Føl oss på sosiale medier

Følg oss på facebook koolart.no Følg oss på instagram

Dette nettstedet bruker informasjonskapsler for å fungere korrekt, analysere trafikk, personalisering av annonser og annonsering.
Drevet av Powered by Mystore
Juster innstillingene