Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Audi

Transmission Mount Insert (Track)

Name: Transmission Mount Insert (Track)Product Notes: A small increase in NVH, usually at idle, should be expected whenstiffening the connecting mount between the engine/transmission and chassis. Weight: 47Fitting Instructions

510.-

Upper Engine Mount Bush Insert

Name: Upper Engine Mount Bush InsertProduct Notes: PFF3-1323BLK Upper Engine Mount Insert is made in our Black 95A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts Weight: 60Fitting Instructions

530.-

Upper Engine Mount Bush Insert

Name: Upper Engine Mount Bush InsertProduct Notes: PFF3-1323 Upper Engine Mount Insert is made in our Yellow 70A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts Weight: 60Fitting Instructions

490.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted especially on diesel vehicles. Does not fit Audi TTRS or RS3 models. Weight: 263Fitting Instructions

680.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often perished rubber bush, which is common for failure on tuned vehicles. This will provide a more precise and settled transmission response during acceleration and deceleration. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted especially on diesel vehicles. Does not fit Audi TTRS or RS3 models. Weight: 263Fitting Instructions

620.-

Upper Engine Mount Insert

Name: Upper Engine Mount Insert Product Notes: PFF85-531BLK is an insert designed to fill the voids of the original bush. Please check voids of your original mount are the same as the image shown for correct fitment. Does not fit Audi TTRS or RS3 models. Weight: 258Fitting Instructions

680.-

Upper Engine Mount Insert

Name: Upper Engine Mount Insert Product Notes: PFF85-531 is an insert designed to fill the voids of the original bush. Please check voids of your original mount are the same as the image shown for correct fitment. Does not fit Audi TTRS or RS3 models. Weight: 258Fitting Instructions

620.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: PFF85-1821 acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Yellow 70A durometer material, it provides the perfect balance between compliance and stiffness, giving control and precision without compromising comfort. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822 Lower Engine Mount Insert and PFF85-1823 Gearbox Mount Insert. For 3 Cylinder & Diesel engines, please use PFF85-1821R. Weight: 72Fitting Instructions

430.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: Only fits RS3 & TTRS. For other models use PFF85-531. Weight: 173Fitting Instructions

730.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: Only fits RS3 & TTRS. For other models use PFF85-531. Weight: 173Fitting Instructions

660.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: PFF85-440 uses our Grey 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for Petrol models and high-torque tuned Diesel models. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits: Sharper throttle response More accurate gear changes Reduced wheel-hop Improved Traction Prolonged mount life Weight: 98Fitting Instructions

440.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: PFF85-440BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits: Sharper throttle response More accurate gear changes Reduced wheel-hop Improved Traction Prolonged mount life Weight: 98Fitting Instructions

480.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: PFF85-440 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for Petrol models and high-torque tuned Diesel models. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits: Sharper throttle response More accurate gear changes Reduced wheel-hop Improved Traction Prolonged mount life Weight: 98Fitting Instructions

440.-

Upper Engine Mount Insert

Name: Upper Engine Mount InsertProduct Notes: PFF85-1821BLK acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our Black 95A durometer material, it provides a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822BLK Lower Engine Mount Insert and PFF85-1823BLK Gearbox Mount Insert. Weight: 72Fitting Instructions

480.-

Upper Engine Mount Insert (Diesel)

Name: Upper Engine Mount Insert (Diesel)Product Notes: PFF85-440R uses our softest Grey 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits: Sharper throttle response More accurate gear changes Reduced wheel-hop Improved Traction Prolonged mount life Weight: 98Fitting Instructions

440.-

Upper Engine Mount Insert (Diesel)

Name: Upper Engine Mount Insert (Diesel)Product Notes: PFF85-440R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits: Sharper throttle response More accurate gear changes Reduced wheel-hop Improved Traction Prolonged mount life Weight: 98Fitting Instructions

440.-

Upper Engine Mount Insert, 3 Cylinder & Diesel

Name: Upper Engine Mount Insert, 3 Cylinder & Diesel Product Notes: PFF85-1821R acts to stiffen the voiding of the OE mount, helping to restore a level of responsiveness expected from a hot hatch. Made using our softest Red 65A durometer material, specifically for Diesel models, the amount of NVH transmission is limited. A small increase in NVH, usually at idle should be expected when stiffening the mounting between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted. For total drivetrain control, this new insert is the perfect accompaniment to PFF85-1822R Lower Engine Mount Insert and PFF85-1823R Gearbox Mount Insert. Weight: 72Fitting Instructions

430.-

Upper Gearbox Mount Bush Insert

Name: Upper Gearbox Mount Bush InsertProduct Notes: PFF3-1322 Upper Gearbox Mount Insert is made in our Yellow 70A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts Weight: 102Fitting Instructions

450.-

Upper Gearbox Mount Bush Insert

Name: Upper Gearbox Mount Bush InsertProduct Notes: PFF3-1322BLK Upper Gearbox Mount Insert is made in our Black 95A durometer and is designed to fill the voiding present in the original rubber mounts. Reducing engine/transmissionmovement by way of upgradedinserts has the following benefits: - Sharper throttle response - Reduced wheel-hop - Improved Traction - More balanced on/off throttle handling - Prolonged the life of the OE mounts Weight: 102Fitting Instructions

490.-

Upper Gearbox Mount Insert

Name: Upper Gearbox Mount InsertProduct Notes: PFF85-441 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for Petrol models and high-torque tuned Diesel models. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits - Sharper throttle response - More accurate gear changes - Reduced wheel-hop - Improved Traction - Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards. Weight: 108

440.-

Upper Gearbox Mount Insert

Name: Upper Gearbox Mount InsertProduct Notes: PFF85-441 uses our Grey70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended for Petrol models and high-torque tuned Diesel models. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits - Sharper throttle response - More accurate gear changes - Reduced wheel-hop - Improved Traction - Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards. Weight: 108

440.-

Upper Gearbox Mount Insert

Name: Upper Gearbox Mount InsertProduct Notes: PFF85-441BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits - Sharper throttle response - More accurate gear changes - Reduced wheel-hop - Improved Traction - Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards. Weight: 108Fitting Instructions

480.-

Upper Gearbox Mount Insert (Diesel)

Name: Upper Gearbox Mount Insert (Diesel)Product Notes: PFF85-441R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits - Sharper throttle response - More accurate gear changes - Reduced wheel-hop - Improved Traction - Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards. Weight: 108Fitting Instructions

440.-

Upper Gearbox Mount Insert (Diesel)

Name: Upper Gearbox Mount Insert (Diesel)Product Notes: PFF85-441R uses our softest Grey 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel, without compromising comfort. A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the drivetrain and chassis. The harder the material used, the greater the NVH transmitted. Reducing engine/trans movement by way of upgraded inserts has the following benefits - Sharper throttle response - More accurate gear changes - Reduced wheel-hop - Improved Traction - Prolonged mount life. Does not fit mount 8N0199555C as fitted to S3 8L and TT Quattro 210/225PS with VIN 8L-Y-013 168>> onwards. Weight: 108Fitting Instructions

440.-

VAG Magnetic Jack Pad Adaptor

Name: VAG Magnetic Jack Pad AdaptorProduct Notes: PFF3-1662 Magnetic Jack Pad is a CNC-machined anodised Jack Pad with a built-in magnet to suit OE lifting adaptors, 8N0803855 and 8N0804583, that many owners may already have fitted - Recommended for lifting across 4 lift points simultaneously on each corner of the vehicle as opposed to using a single jack point. Its magnetic head self-locates into the recess of the metal OE adaptor ensuring a safe and solid lift every time. For those that don't have the OE lifting adaptors, PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting. Fits Vehicles with the OEM jacking point 8N0 804 583 & 8N0 803 855 already fitted, shown below.Audi TT Mk1 was equipped from factory with this OEM part, but it can be fitted aftermarket to any PQ34, PQ35, PQ46 and MQB Gen 1 vehicle, in this list:Audi A3/S3 Mk1 8L (1996-2003)Audi A3/S3/RS3 Mk2 8P (2003-2012)Audi A3/S3/RS3 Mk3 8V (2013-)Audi TT Mk1 8N (1999-2006) Audi TT/S/RS Mk2 8J (2007-2014) Audi TT Mk3 8S (2014 on) Audi Q2 (2017 on) Audi Q3 (2012 - 2018) Seat Toledo Mk2 1M (1999 - 2004) Seat Toledo Mk3 5P (2004-2009) Seat Alhambra Mk2 (2010 on) Seat Leon Mk1 TYP 1M (1999-2005) Seat Leon Mk2 1P (2005-2012) Seat Leon Mk3 5F (2013 on) Skoda Octavia Mk1 Typ 1U (1996-2004) Skoda Octavia Mk2 1Z (2004-2012) Skoda Octavia 5E (2012-2019) Skoda Yeti 5L (2009-2017) Skoda Superb B6 (2009-2011) Skoda Superb 3V (2015 on) Volkswagen New Beetle & Cabrio (1998-2011) Volkswagen Beetle A5 (2011 on) Volkswagen Bora (1999-2005) Volkswagen Caddy Mk3 Typ 2K (2004 - 06/2010) Volkswagen Caddy Mk3.5 Typ 2K (06/2010 on) Volkswagen Golf Mk4 1J (1997-2004) Volkswagen Golf Mk5 1K (2004-2010) Volkswagen Golf Plus 5M (2004-2010) Volkswagen Golf Mk6 5K (2009-2012) Volkswagen Golf Mk7 5G (2012-2020) Volkswagen Jetta Mk5 1K (2005-2010) Volkswagen Jetta Mk6 A6 (2011 on) Volkswagen Passat B6 & B7 Typ3C (2006-2013) Volkswagen Passat CC 35 (2008-2012) Volkswagen Scirocco Mk3 (2008 - 2017) Volkswagen Sharan Mk2 (2010 on) Volkswagen Tiguan Mk1 (2007 - 2017) Volkswagen Touran (2003-2015) Volkswagen Touran (2017 on) Volkswagen CC (2012 - 2017) Volkswagen Eos (2006-2015) Weight: 155Fitting Instructions

660.-

VAG SUV Jack Pad Adaptor

Name: VAG SUV Jack Pad AdaptorProduct Notes: Made from Black 95Adurometer PUfor durability and designed to fit into the original rectangular plastic lifting point, these handy workshop widgets helplift/jackingstability and location whilst protecting the underside of yours/your customer's vehicle. Fits e-tron up to 23/09/2019. Designed to fit the jacking point fitted to:Audi e-tron (up to 23/09/2019)Audi A8 D5 (2018 - ON) Weight: 234

440.-

Viser 513 til 538 (av 538 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png