Hopp til innhold

Nettbutikk åpen 24/7 info@koolart.no

Audi

Rear Subframe Rear Bush 10mm

Name: Rear Subframe Rear Bush 10mmProduct Notes: Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-120-12. Bush Size: 10mm Bore SleeveWeight: 318Fitting Instructions

550.-

Rear Subframe Rear Bush 10mm

Name: Rear Subframe Rear Bush 10mmProduct Notes: Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-120-12. Bush Size: 10mm Bore SleeveWeight: 318Fitting Instructions

550.-

Rear Subframe Rear Bush 12mm

Name: Rear Subframe Rear Bush 12mmProduct Notes: Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-120-10. Bush Size: 12mm Bore SleeveWeight: 318Fitting Instructions

550.-

Rear Subframe Rear Bush 12mm

Name: Rear Subframe Rear Bush 12mmProduct Notes: Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-120-10. Bush Size: 12mm Bore SleeveWeight: 318Fitting Instructions

550.-

Rear Subframe Rear Bush Insert

Name: Rear Subframe Rear Bush Insert Product Notes: This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-732. A5 Notes:- Does not fit A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-733 for both of these). Weight: 427Fitting Instructions

570.-

Rear Subframe Rear Bush Insert

Name: Rear Subframe Rear Bush Insert Product Notes: This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-732. A5 Notes:- Does not fit A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-733 for both of these). Weight: 427Fitting Instructions

520.-

Rear Subframe Rear Bush Insert

Name: Rear Subframe Rear Bush Insert Product Notes: This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-732. A5 notes:- Fits A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-737 for all other A5 models). Weight: 333Fitting Instructions

570.-

Rear Subframe Rear Bush Insert

Name: Rear Subframe Rear Bush Insert Product Notes: This is an insert to fit into and fill the voids in the original bush, for a replacement bush please use PFF3-732. A5 notes:- Fits A5 FWD Coupe 4 cylinder models or A5 Quattro 4 cylinder models up to 11/15, (use PFR3-737 for all other A5 models). Weight: 333Fitting Instructions

520.-

Rear Subframe Rear Mounting Bush

Name: Rear Subframe Rear Mounting Bush Product Notes: This bush fits 4 wheel drive models only up to 28.5.2012. Weight: 1400Fitting Instructions

1230.-

Rear Subframe Rear Mounting Bush

Name: Rear Subframe Rear Mounting Bush Product Notes: This bush fits 4 wheel drive models only up to 28.5.2012. Weight: 1400Fitting Instructions

1120.-

Rear Subframe Rear Mounting Bush

Name: Rear Subframe Rear Mounting BushProduct Notes: This bush uses our Black 95A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and subframe location. Weight: 1036Fitting Instructions

900.-

Rear Subframe Rear Mounting Bush

Name: Rear Subframe Rear Mounting BushProduct Notes: This bush uses our Purple 80A durometer material with bonded supporting washers for strengthening and a bespoke end face design to reduce noise transmission to the cabin, whilst maintaining durability and subframe location. Weight: 1036Fitting Instructions

820.-

Rear Tie Rod Outer Bush

Name: Rear Tie Rod Outer BushProduct Notes: Does not fit 8-cylinder A6 Quattro/S6 models. Fits cast aluminium arms only. Weight: 347Fitting Instructions

670.-

Rear Tie Rod Outer Bush

Name: Rear Tie Rod Outer BushProduct Notes: Does not fit 8-cylinder A6 Quattro/S6 models. Fits cast aluminium arms only. Weight: 347Fitting Instructions

670.-

Rear Trailing Arm Front Bush

Name: Rear Trailing Arm Front BushProduct Notes: Also fits VW New Beetle Mk1 and Skoda Octavia MK1 4WD models. To adjust the vehicles rear toe angle, please use PFR3-508G. Weight: 751Fitting Instructions

750.-

Rear Trailing Arm Front Bush

Name: Rear Trailing Arm Front Bush Product Notes: Also fits VW New Beetle Mk1 and Skoda Octavia MK1 4WD models. To adjust the vehicles rear toe angle, please use PFR3-508G. Weight: 751Fitting Instructions

680.-

Rear Trailing Arm Front Bush

Name: Rear Trailing Arm Front Bush Product Notes: Also fits VW New Beetle Mk1 and Skoda Octavia MK1 4WD models. To adjust the vehicles rear toe angle, please use PFR3-508G. Weight: 751Fitting Instructions

680.-

Rear Trailing Arm Front Bush Toe Adjust

Name: Rear Trailing Arm Front Bush Toe AdjustProduct Notes: This part has been engineered to provide an additional 0.5 degrees positive toe adjustment, useful to correct excessive toe-in on heavily lowered cars. For a standard replacement part with no offset geometry, please use PFR3-508. Weight: 756Fitting Instructions

750.-

Rear Trailing Arm Front Bush Toe Adjust

Name: Rear Trailing Arm Front Bush Toe AdjustProduct Notes: This part has been engineered to provide an additional 0.5 degrees positive toe adjustment, useful to correct excessive toe-in on heavily lowered cars. For a standard replacement part with no offset geometry, please use PFR3-508. Weight: 756Fitting Instructions

680.-

Rear Upper Arm Inner Bush (Cast Arm)

Name: Rear Upper Arm Inner Bush (Cast Arm)Product Notes: Fits cast steel arms only. For pressed steel arms, use PFR3-209. Fits cast steel arms only. For pressed steel arms, please use PFR3-209 Weight: 464Fitting Instructions

450.-

Rear Upper Arm Inner Bush (Cast Arm)

Name: Rear Upper Arm Inner Bush (Cast Arm)Product Notes: Made in our Black 95A durometer material, these bushes play a key role in maintaining wheel alignment and reducing tyre wear with controlled suspension movement while enhancing handling by increasing stiffness by over 80%.It's also the perfect accompaniment to PFR3-208 Rear Upper Outer Arm Bush for those looking to carry out a full wishbone refurb. Weight: 325Fitting Instructions

450.-

Rear Upper Arm Inner Bush (Cast Arm)

Name: Rear Upper Arm Inner Bush (Cast Arm)Product Notes: Made in our Black 95A durometer material, these bushes play a key role in maintaining wheel alignment and reducing tyre wear with controlled suspension movement while enhancing handling by increasing stiffness by over 80%.It's also the perfect accompaniment to PFR3-208 Rear Upper Outer Arm Bush for those looking to carry out a full wishbone refurb. Weight: 325Fitting Instructions

450.-

Viser 449 til 480 (av 538 produkter)

Rask leveringstid

Populære merker

Trygg betaling

Norsk nettbutikk

  • klarna-light.png
  • vipps-orange.png
  • mastercard-icon.png
  • posten.png